<?xml version="1.0" encoding="ISO-8859-1"?>
<!--- Copyright (c) 2013-2018, The Linux Foundation. All rights reserved. -->
<!--- -->
<!--- Redistribution and use in source and binary forms, with or without -->
<!--- modification, are permitted provided that the following conditions are -->
<!--- met: -->
<!--- * Redistributions of source code must retain the above copyright -->
<!--- notice, this list of conditions and the following disclaimer. -->
<!--- * Redistributions in binary form must reproduce the above -->
<!--- copyright notice, this list of conditions and the following -->
<!--- disclaimer in the documentation and/or other materials provided -->
<!--- with the distribution. -->
<!--- * Neither the name of The Linux Foundation nor the names of its -->
<!--- contributors may be used to endorse or promote products derived -->
<!--- from this software without specific prior written permission. -->
<!--- -->
<!--- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!--- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!--- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!--- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!--- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!--- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!--- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!--- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!--- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE -->
<!--- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!--- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<sound_trigger_platform_info>
<param version="0x0102" /> <!-- this must be the first param -->
<!--- Version History: -->
<!--- 0x0101: Legacy version. -->
<!--- 0x0102: Includes acdb_ids param with the gcs_usecase tag. This matches -->
<!--- the gcs_usecase with the acdb device that uses it. -->
<common_config>
<param max_ape_sessions="8" />
<param enable_failure_detection="false" />
<param support_device_switch="false" />
<param transit_to_adsp_on_playback="true" />
<param concurrent_capture="true" />
<!-- Below backend params must match with port used in mixer path file -->
<!-- param used to configure backend sample rate, format and channels -->
<param backend_port_name="PRI_TDM_TX_0" />
<!-- Param used to match and obtain device backend index -->
<param backend_dai_name="PRI_TDM_TX_0" />
</common_config>
<acdb_ids>
<param DEVICE_HANDSET_MIC_APE="100" />
<param DEVICE_HANDSET_MIC_PP_APE="135" />
<param DEVICE_HANDSET_DMIC_APE="149" />
</acdb_ids>
<!-- Multiple sound_model_config tags can be listed, each with unique
vendor_uuid. -->
<sound_model_config>
<param vendor_uuid="7038ddc8-30f2-11e6-b0ac-40a8f03d3f15" />
<param execution_type="ADSP" /> <!-- value: "WDSP" "ADSP" "DYNAMIC" -->
<param app_type="3" /> <!-- app type used in ACDB -->
<param library="none" />
<param max_ape_phrases="1" />
<param max_ape_users="1" />
<!-- Profile specific data which the algorithm can support -->
<param sample_rate="16000" />
<param bit_width="16" />
<param channel_count="1"/>
<!-- adm_cfg_profile should match with the one defined under adm_config -->
<!-- Set it to NONE if LSM directly connects to AFE -->
<param adm_cfg_profile="FLUENCE" />
<!-- fluence_type: "FLUENCE", "FLUENCE_DMIC" -->
<!-- "FLUENCE_QMIC". param value is valid when adm_cfg_profile="FLUENCE"-->
<param fluence_type="FLUENCE_DMIC" />
<!-- wdsp_fluence_type: fluence disabled: "NONE" -->
<!-- fluence enabled: "FLUENCE_DMIC", "FLUENCE_QMIC" -->
<!-- Two channel gcs usecase TBD -->
<lsm_usecase>
<param execution_mode="ADSP" />
<param load_sound_model_ids="0x18000001, 0x00012C14" />
<param unload_sound_model_ids="0x18000001, 0x00012C15" />
<param confidence_levels_ids="0x18000001, 0x00012C07" />
<param operation_mode_ids="0x18000001, 0x00012C02" />
<param polling_enable_ids="0x18000001, 0x00012C1B" />
<param custom_config_ids="0x18000001, 0x00012C20" />
</lsm_usecase>
<!-- kw_duration is in milli seconds. It is valid only for FTRT
transfer mode -->
<param capture_keyword="PCM_raw, FTRT, 2000" />
<param client_capture_read_delay="2000" />
</sound_model_config>
<sound_model_config> <!-- Music Detection -->
<param vendor_uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" />
<param execution_type="ADSP" /> <!-- value: "WDSP" "ADSP" "DYNAMIC" -->
<param app_type="4" /> <!-- app type used in ACDB -->
<param library="none" />
<param sample_rate="16000" />
<param bit_width="16" />
<param channel_count="1"/>
<!-- adm_cfg_profile should match with the one defined under adm_config -->
<!-- Set it to NONE if LSM directly connects to AFE -->
<param adm_cfg_profile="FLUENCE" />
<!-- fluence_type: "FLUENCE", "FLUENCE_DMIC" -->
<!-- "FLUENCE_QMIC". param value is valid when adm_cfg_profile="FLUENCE"-->
<param fluence_type="FLUENCE_DMIC" />
<lsm_usecase>
<param execution_mode="ADSP" />
<param load_sound_model_ids="0x18100000, 0x00012C14" />
<param unload_sound_model_ids="0x18100000, 0x00012C15" />
<param confidence_levels_ids="0x18100000, 0x00012C07" />
<param operation_mode_ids="0x18100000, 0x00012C02" />
<param polling_enable_ids="0x18100000, 0x00012C1B" />
<param custom_config_ids="0x18100000, 0x00012C20" />
</lsm_usecase>
<!-- kw_duration is in milli seconds. It is valid only for FTRT
transfer mode -->
<param capture_keyword="MULAW_raw, FTRT, 5000" />
<param client_capture_read_delay="2000" />
</sound_model_config>
<!-- Multiple adm_config tags can be listed, each with unique profile name. -->
<!-- app_type to match corresponding value from ACDB -->
<adm_config>
<param adm_cfg_profile="DEFAULT" />
<param app_type="69938" />
<param sample_rate="16000" />
<param bit_width="16" />
</adm_config>
<adm_config>
<param adm_cfg_profile="FLUENCE" />
<param app_type="69944" />
<param sample_rate="16000" />
<param bit_width="16" />
</adm_config>
<adm_config>
<param adm_cfg_profile="FLUENCE_STEREO" />
<param app_type="69948" />
<param sample_rate="16000" />
<param bit_width="16" />
</adm_config>
<lpma_config>
<param uid="0x10" />
<param bridge_buffer_ids="0x00020010, 0x4, 0x00020018" />
</lpma_config>
</sound_trigger_platform_info>