<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2017 The Android Open Source Project

     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at

          http://www.apache.org/licenses/LICENSE-2.0

     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
     See the License for the specific language governing permissions and
     limitations under the License.
-->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
           targetNamespace="http://schemas.android.com/audio/audio_effects_conf/v2_0"
           xmlns:aec="http://schemas.android.com/audio/audio_effects_conf/v2_0"
           elementFormDefault="qualified">

  <!-- Simple types -->
  <xs:simpleType name="versionType">
    <xs:restriction base="xs:decimal">
      <xs:enumeration value="2.0"/>
    </xs:restriction>
  </xs:simpleType>
  <xs:simpleType name="uuidType">
    <xs:restriction base="xs:string">
      <xs:pattern value="[0-9A-Fa-f]{8}-[0-9A-Fa-f]{4}-[0-9A-Fa-f]{4}-[0-9A-Fa-f]{4}-[0-9A-Fa-f]{12}"/>
    </xs:restriction>
  </xs:simpleType>
  <xs:simpleType name="streamInputType">
    <xs:restriction base="xs:string">
      <xs:enumeration value="mic"/>
      <xs:enumeration value="voice_uplink"/>
      <xs:enumeration value="voice_downlink"/>
      <xs:enumeration value="voice_call"/>
      <xs:enumeration value="camcorder"/>
      <xs:enumeration value="voice_recognition"/>
      <xs:enumeration value="voice_communication"/>
      <xs:enumeration value="unprocessed"/>
      <xs:enumeration value="voice_performance"/>
    </xs:restriction>
  </xs:simpleType>
  <xs:simpleType name="streamOutputType">
    <xs:restriction base="xs:string">
      <xs:enumeration value="voice_call"/>
      <xs:enumeration value="system"/>
      <xs:enumeration value="ring"/>
      <xs:enumeration value="music"/>
      <xs:enumeration value="alarm"/>
      <xs:enumeration value="notification"/>
      <xs:enumeration value="bluetooth_sco"/>
      <xs:enumeration value="enforced_audible"/>
      <xs:enumeration value="dtmf"/>
      <xs:enumeration value="tts"/>
    </xs:restriction>
  </xs:simpleType>
  <xs:simpleType name="relativePathType">
    <xs:restriction base="xs:string">
      <xs:pattern value="[^/].*"/>
    </xs:restriction>
  </xs:simpleType>

  <!-- Complex types -->
  <xs:complexType name="librariesType">
    <xs:annotation>
      <xs:documentation xml:lang="en">
        List of effect libraries to load. Each library element must have "name" and
        "path" attributes. The latter is giving the path of the library .so file
        relative to the standard effect folders: /(vendor|odm|system)/lib(64)?/soundfx/

        Example for a library in "/vendor/lib/soundfx/lib.so":
        <library name="name" path="lib.so"/>

      </xs:documentation>
    </xs:annotation>
    <xs:sequence>
      <xs:element name="library" minOccurs="0" maxOccurs="unbounded">
        <xs:complexType>
          <xs:attribute name="name" type="xs:string" use="required"/>
          <xs:attribute name="path" type="aec:relativePathType" use="required"/>
        </xs:complexType>
      </xs:element>
    </xs:sequence>
  </xs:complexType>
  <xs:complexType name="effectImplType">
    <xs:attribute name="library" type="xs:string" use="required"/>
    <xs:attribute name="uuid" type="aec:uuidType" use="required"/>
  </xs:complexType>
  <xs:complexType name="effectType">
    <xs:complexContent>
      <xs:extension base="aec:effectImplType">
        <xs:attribute name="name" type="xs:string" use="required"/>
      </xs:extension>
    </xs:complexContent>
  </xs:complexType>
  <xs:complexType name="effectProxyType">
    <xs:complexContent>
      <xs:extension base="aec:effectType">
        <xs:sequence>
          <xs:element name="libsw" type="aec:effectImplType"/>
          <xs:element name="libhw" type="aec:effectImplType"/>
        </xs:sequence>
      </xs:extension>
    </xs:complexContent>
  </xs:complexType>
  <xs:complexType name="effectsType">
    <xs:annotation>
      <xs:documentation xml:lang="en">
        List of effects to load. Each effect element must contain "name",
        "library", and "uuid" attrs. The value of the "library" attr must
        correspond to the name of a "library" element. The name of the effect
        element is indicative, only the value of the "uuid" element designates
        the effect for the audio framework.  The uuid is the implementation
        specific UUID as specified by the effect vendor. This is not the generic
        effect type UUID.

        For effect proxy implementations, SW and HW implemetations of the effect
        can be specified.

        Example:

        <effect name="name" library="lib" uuid="uuuu"/>
        <effectProxy name="proxied" library="proxy" uuid="xxxx">
            <libsw library="sw_bundle" uuid="yyyy"/>
            <libhw library="offload_bundle" uuid="zzzz"/>
        </effectProxy>

      </xs:documentation>
    </xs:annotation>
    <xs:choice maxOccurs="unbounded">
      <xs:element name="effect" type="aec:effectType" minOccurs="0" maxOccurs="unbounded"/>
      <xs:element name="effectProxy" type="aec:effectProxyType" minOccurs="0" maxOccurs="unbounded"/>
    </xs:choice>
  </xs:complexType>
  <xs:complexType name="streamProcessingType">
    <xs:sequence>
      <xs:element name="apply" minOccurs="0" maxOccurs="unbounded">
        <xs:complexType>
          <xs:attribute name="effect" type="xs:string" use="required"/>
        </xs:complexType>
      </xs:element>
    </xs:sequence>
  </xs:complexType>
  <xs:complexType name="streamPreprocessType">
    <xs:annotation>
      <xs:documentation xml:lang="en">
        Audio preprocessing configuration. The processing configuration consists
        of a list of elements each describing processing settings for a given
        input stream. Valid input stream types are listed in "streamInputType".

        Each stream element contains a list of "apply" elements. The value of the
        "effect" attr must correspond to the name of an "effect" element.

        Example:

        <stream type="voice_communication">
            <apply effect="effect1"/>
            <apply effect="effect2"/>
        </stream>

      </xs:documentation>
    </xs:annotation>
    <xs:complexContent>
      <xs:extension base="aec:streamProcessingType">
        <xs:attribute name="type" type="aec:streamInputType" use="required"/>
      </xs:extension>
    </xs:complexContent>
  </xs:complexType>
  <xs:complexType name="streamPostprocessType">
    <xs:annotation>
      <xs:documentation xml:lang="en">
        Audio postprocessing configuration. The processing configuration consists
        of a list of elements each describing processing settings for a given
        output stream. Valid output stream types are listed in "streamOutputType".

        Each stream element contains a list of "apply" elements. The value of the
        "effect" attr must correspond to the name of an "effect" element.

        Example:

        <stream type="music">
            <apply effect="effect1"/>
        </stream>

      </xs:documentation>
    </xs:annotation>
    <xs:complexContent>
      <xs:extension base="aec:streamProcessingType">
        <xs:attribute name="type" type="aec:streamOutputType" use="required"/>
      </xs:extension>
    </xs:complexContent>
  </xs:complexType>

  <!-- Root element -->
  <xs:element name="audio_effects_conf">
    <xs:complexType>
      <xs:sequence>
        <xs:element name="libraries" type="aec:librariesType"/>
        <xs:element name="effects" type="aec:effectsType"/>
        <xs:element name="postprocess" minOccurs="0" maxOccurs="1">
          <xs:complexType>
            <xs:sequence>
              <xs:element name="stream" type="aec:streamPostprocessType" minOccurs="0" maxOccurs="unbounded"/>
            </xs:sequence>
          </xs:complexType>
        </xs:element>
        <xs:element name="preprocess" minOccurs="0" maxOccurs="1">
          <xs:complexType>
            <xs:sequence>
              <xs:element name="stream" type="aec:streamPreprocessType" minOccurs="0" maxOccurs="unbounded"/>
            </xs:sequence>
          </xs:complexType>
        </xs:element>
      </xs:sequence>
      <xs:attribute name="version" type="aec:versionType" use="required"/>
    </xs:complexType>

    <!-- Keys and references -->
    <xs:key name="libraryName">
      <xs:selector xpath="aec:libraries/aec:library"/>
      <xs:field xpath="@name"/>
    </xs:key>
    <xs:keyref name="libraryNameRef1" refer="aec:libraryName">
      <xs:selector xpath="aec:effects/aec:effect"/>
      <xs:field xpath="@library"/>
    </xs:keyref>
    <xs:keyref name="libraryNameRef2" refer="aec:libraryName">
      <xs:selector xpath="aec:effects/aec:effect/aec:libsw"/>
      <xs:field xpath="@library"/>
    </xs:keyref>
    <xs:keyref name="libraryNameRef3" refer="aec:libraryName">
      <xs:selector xpath="aec:effects/aec:effect/aec:libhw"/>
      <xs:field xpath="@library"/>
    </xs:keyref>
    <xs:key name="effectName">
      <xs:selector xpath="aec:effects/aec:effect|aec:effects/aec:effectProxy"/>
      <xs:field xpath="@name"/>
    </xs:key>
    <xs:keyref name="effectNamePreRef" refer="aec:effectName">
      <xs:selector xpath="aec:preprocess/aec:stream/aec:apply"/>
      <xs:field xpath="@effect"/>
    </xs:keyref>
    <xs:keyref name="effectNamePostRef" refer="aec:effectName">
      <xs:selector xpath="aec:postprocess/aec:stream/aec:apply"/>
      <xs:field xpath="@effect"/>
    </xs:keyref>
  </xs:element>
</xs:schema>