// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
/*
* Memory Functions
*
* Copied from FADS ROM, Dan Malek (dmalek@jlc.net)
*/
#include <common.h>
#include <console.h>
#include <bootretry.h>
#include <cli.h>
#include <command.h>
#include <console.h>
#include <hash.h>
#include <inttypes.h>
#include <mapmem.h>
#include <watchdog.h>
#include <asm/io.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SYS_MEMTEST_SCRATCH
#define CONFIG_SYS_MEMTEST_SCRATCH 0
#endif
static int mod_mem(cmd_tbl_t *, int, int, int, char * const []);
/* Display values from last command.
* Memory modify remembered values are different from display memory.
*/
static ulong dp_last_addr, dp_last_size;
static ulong dp_last_length = 0x40;
static ulong mm_last_addr, mm_last_size;
static ulong base_address = 0;
/* Memory Display
*
* Syntax:
* md{.b, .w, .l, .q} {addr} {len}
*/
#define DISP_LINE_LEN 16
static int do_mem_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, length, bytes;
const void *buf;
int size;
int rc = 0;
/* We use the last specified parameters, unless new ones are
* entered.
*/
addr = dp_last_addr;
size = dp_last_size;
length = dp_last_length;
if (argc < 2)
return CMD_RET_USAGE;
if ((flag & CMD_FLAG_REPEAT) == 0) {
/* New command specified. Check for a size specification.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
/* Address is specified since argc > 1
*/
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
/* If another parameter, it is the length to display.
* Length is the number of objects, not number of bytes.
*/
if (argc > 2)
length = simple_strtoul(argv[2], NULL, 16);
}
bytes = size * length;
buf = map_sysmem(addr, bytes);
/* Print the lines. */
print_buffer(addr, buf, size, length, DISP_LINE_LEN / size);
addr += bytes;
unmap_sysmem(buf);
dp_last_addr = addr;
dp_last_length = length;
dp_last_size = size;
return (rc);
}
static int do_mem_mm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 1, flag, argc, argv);
}
static int do_mem_nm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return mod_mem (cmdtp, 0, flag, argc, argv);
}
static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
u64 writeval;
#else
ulong writeval;
#endif
ulong addr, count;
int size;
void *buf, *start;
ulong bytes;
if ((argc < 3) || (argc > 4))
return CMD_RET_USAGE;
/* Check for size specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 1)
return 1;
/* Address is specified since argc > 1
*/
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
/* Get the value to write.
*/
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
writeval = simple_strtoull(argv[2], NULL, 16);
#else
writeval = simple_strtoul(argv[2], NULL, 16);
#endif
/* Count ? */
if (argc == 4) {
count = simple_strtoul(argv[3], NULL, 16);
} else {
count = 1;
}
bytes = size * count;
start = map_sysmem(addr, bytes);
buf = start;
while (count-- > 0) {
if (size == 4)
*((u32 *)buf) = (u32)writeval;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
else if (size == 8)
*((u64 *)buf) = (u64)writeval;
#endif
else if (size == 2)
*((u16 *)buf) = (u16)writeval;
else
*((u8 *)buf) = (u8)writeval;
buf += size;
}
unmap_sysmem(start);
return 0;
}
#ifdef CONFIG_MX_CYCLIC
static int do_mem_mdc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
ulong count;
if (argc < 4)
return CMD_RET_USAGE;
count = simple_strtoul(argv[3], NULL, 10);
for (;;) {
do_mem_md (NULL, 0, 3, argv);
/* delay for <count> ms... */
for (i=0; i<count; i++)
udelay (1000);
/* check for ctrl-c to abort... */
if (ctrlc()) {
puts("Abort\n");
return 0;
}
}
return 0;
}
static int do_mem_mwc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
ulong count;
if (argc < 4)
return CMD_RET_USAGE;
count = simple_strtoul(argv[3], NULL, 10);
for (;;) {
do_mem_mw (NULL, 0, 3, argv);
/* delay for <count> ms... */
for (i=0; i<count; i++)
udelay (1000);
/* check for ctrl-c to abort... */
if (ctrlc()) {
puts("Abort\n");
return 0;
}
}
return 0;
}
#endif /* CONFIG_MX_CYCLIC */
static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr1, addr2, count, ngood, bytes;
int size;
int rcode = 0;
const char *type;
const void *buf1, *buf2, *base;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
u64 word1, word2;
#else
ulong word1, word2;
#endif
if (argc != 4)
return CMD_RET_USAGE;
/* Check for size specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
type = size == 8 ? "double word" :
size == 4 ? "word" :
size == 2 ? "halfword" : "byte";
addr1 = simple_strtoul(argv[1], NULL, 16);
addr1 += base_address;
addr2 = simple_strtoul(argv[2], NULL, 16);
addr2 += base_address;
count = simple_strtoul(argv[3], NULL, 16);
bytes = size * count;
base = buf1 = map_sysmem(addr1, bytes);
buf2 = map_sysmem(addr2, bytes);
for (ngood = 0; ngood < count; ++ngood) {
if (size == 4) {
word1 = *(u32 *)buf1;
word2 = *(u32 *)buf2;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
} else if (size == 8) {
word1 = *(u64 *)buf1;
word2 = *(u64 *)buf2;
#endif
} else if (size == 2) {
word1 = *(u16 *)buf1;
word2 = *(u16 *)buf2;
} else {
word1 = *(u8 *)buf1;
word2 = *(u8 *)buf2;
}
if (word1 != word2) {
ulong offset = buf1 - base;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
printf("%s at 0x%p (%#0*"PRIx64") != %s at 0x%p (%#0*"
PRIx64 ")\n",
type, (void *)(addr1 + offset), size, word1,
type, (void *)(addr2 + offset), size, word2);
#else
printf("%s at 0x%08lx (%#0*lx) != %s at 0x%08lx (%#0*lx)\n",
type, (ulong)(addr1 + offset), size, word1,
type, (ulong)(addr2 + offset), size, word2);
#endif
rcode = 1;
break;
}
buf1 += size;
buf2 += size;
/* reset watchdog from time to time */
if ((ngood % (64 << 10)) == 0)
WATCHDOG_RESET();
}
unmap_sysmem(buf1);
unmap_sysmem(buf2);
printf("Total of %ld %s(s) were the same\n", ngood, type);
return rcode;
}
static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr, dest, count;
int size;
if (argc != 4)
return CMD_RET_USAGE;
/* Check for size specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
dest = simple_strtoul(argv[2], NULL, 16);
dest += base_address;
count = simple_strtoul(argv[3], NULL, 16);
if (count == 0) {
puts ("Zero length ???\n");
return 1;
}
#ifdef CONFIG_MTD_NOR_FLASH
/* check if we are copying to Flash */
if (addr2info(dest) != NULL) {
int rc;
puts ("Copy to Flash... ");
rc = flash_write ((char *)addr, dest, count*size);
if (rc != 0) {
flash_perror (rc);
return (1);
}
puts ("done\n");
return 0;
}
#endif
memcpy((void *)dest, (void *)addr, count * size);
return 0;
}
static int do_mem_base(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
if (argc > 1) {
/* Set new base address.
*/
base_address = simple_strtoul(argv[1], NULL, 16);
}
/* Print the current base address.
*/
printf("Base Address: 0x%08lx\n", base_address);
return 0;
}
static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
ulong addr, length, i, bytes;
int size;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
volatile u64 *llp;
#endif
volatile u32 *longp;
volatile u16 *shortp;
volatile u8 *cp;
const void *buf;
if (argc < 3)
return CMD_RET_USAGE;
/*
* Check for a size specification.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
/* Address is always specified.
*/
addr = simple_strtoul(argv[1], NULL, 16);
/* Length is the number of objects, not number of bytes.
*/
length = simple_strtoul(argv[2], NULL, 16);
bytes = size * length;
buf = map_sysmem(addr, bytes);
/* We want to optimize the loops to run as fast as possible.
* If we have only one object, just run infinite loops.
*/
if (length == 1) {
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
if (size == 8) {
llp = (u64 *)buf;
for (;;)
i = *llp;
}
#endif
if (size == 4) {
longp = (u32 *)buf;
for (;;)
i = *longp;
}
if (size == 2) {
shortp = (u16 *)buf;
for (;;)
i = *shortp;
}
cp = (u8 *)buf;
for (;;)
i = *cp;
}
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
if (size == 8) {
for (;;) {
llp = (u64 *)buf;
i = length;
while (i-- > 0)
*llp++;
}
}
#endif
if (size == 4) {
for (;;) {
longp = (u32 *)buf;
i = length;
while (i-- > 0)
*longp++;
}
}
if (size == 2) {
for (;;) {
shortp = (u16 *)buf;
i = length;
while (i-- > 0)
*shortp++;
}
}
for (;;) {
cp = (u8 *)buf;
i = length;
while (i-- > 0)
*cp++;
}
unmap_sysmem(buf);
return 0;
}
#ifdef CONFIG_LOOPW
static int do_mem_loopw(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
ulong addr, length, i, bytes;
int size;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
volatile u64 *llp;
u64 data;
#else
ulong data;
#endif
volatile u32 *longp;
volatile u16 *shortp;
volatile u8 *cp;
void *buf;
if (argc < 4)
return CMD_RET_USAGE;
/*
* Check for a size specification.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
/* Address is always specified.
*/
addr = simple_strtoul(argv[1], NULL, 16);
/* Length is the number of objects, not number of bytes.
*/
length = simple_strtoul(argv[2], NULL, 16);
/* data to write */
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
data = simple_strtoull(argv[3], NULL, 16);
#else
data = simple_strtoul(argv[3], NULL, 16);
#endif
bytes = size * length;
buf = map_sysmem(addr, bytes);
/* We want to optimize the loops to run as fast as possible.
* If we have only one object, just run infinite loops.
*/
if (length == 1) {
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
if (size == 8) {
llp = (u64 *)buf;
for (;;)
*llp = data;
}
#endif
if (size == 4) {
longp = (u32 *)buf;
for (;;)
*longp = data;
}
if (size == 2) {
shortp = (u16 *)buf;
for (;;)
*shortp = data;
}
cp = (u8 *)buf;
for (;;)
*cp = data;
}
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
if (size == 8) {
for (;;) {
llp = (u64 *)buf;
i = length;
while (i-- > 0)
*llp++ = data;
}
}
#endif
if (size == 4) {
for (;;) {
longp = (u32 *)buf;
i = length;
while (i-- > 0)
*longp++ = data;
}
}
if (size == 2) {
for (;;) {
shortp = (u16 *)buf;
i = length;
while (i-- > 0)
*shortp++ = data;
}
}
for (;;) {
cp = (u8 *)buf;
i = length;
while (i-- > 0)
*cp++ = data;
}
}
#endif /* CONFIG_LOOPW */
#ifdef CONFIG_CMD_MEMTEST
static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr,
vu_long *dummy)
{
vu_long *addr;
ulong errs = 0;
ulong val, readback;
int j;
vu_long offset;
vu_long test_offset;
vu_long pattern;
vu_long temp;
vu_long anti_pattern;
vu_long num_words;
static const ulong bitpattern[] = {
0x00000001, /* single bit */
0x00000003, /* two adjacent bits */
0x00000007, /* three adjacent bits */
0x0000000F, /* four adjacent bits */
0x00000005, /* two non-adjacent bits */
0x00000015, /* three non-adjacent bits */
0x00000055, /* four non-adjacent bits */
0xaaaaaaaa, /* alternating 1/0 */
};
num_words = (end_addr - start_addr) / sizeof(vu_long);
/*
* Data line test: write a pattern to the first
* location, write the 1's complement to a 'parking'
* address (changes the state of the data bus so a
* floating bus doesn't give a false OK), and then
* read the value back. Note that we read it back
* into a variable because the next time we read it,
* it might be right (been there, tough to explain to
* the quality guys why it prints a failure when the
* "is" and "should be" are obviously the same in the
* error message).
*
* Rather than exhaustively testing, we test some
* patterns by shifting '1' bits through a field of
* '0's and '0' bits through a field of '1's (i.e.
* pattern and ~pattern).
*/
addr = buf;
for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]); j++) {
val = bitpattern[j];
for (; val != 0; val <<= 1) {
*addr = val;
*dummy = ~val; /* clear the test data off the bus */
readback = *addr;
if (readback != val) {
printf("FAILURE (data line): "
"expected %08lx, actual %08lx\n",
val, readback);
errs++;
if (ctrlc())
return -1;
}
*addr = ~val;
*dummy = val;
readback = *addr;
if (readback != ~val) {
printf("FAILURE (data line): "
"Is %08lx, should be %08lx\n",
readback, ~val);
errs++;
if (ctrlc())
return -1;
}
}
}
/*
* Based on code whose Original Author and Copyright
* information follows: Copyright (c) 1998 by Michael
* Barr. This software is placed into the public
* domain and may be used for any purpose. However,
* this notice must not be changed or removed and no
* warranty is either expressed or implied by its
* publication or distribution.
*/
/*
* Address line test
* Description: Test the address bus wiring in a
* memory region by performing a walking
* 1's test on the relevant bits of the
* address and checking for aliasing.
* This test will find single-bit
* address failures such as stuck-high,
* stuck-low, and shorted pins. The base
* address and size of the region are
* selected by the caller.
* Notes: For best results, the selected base
* address should have enough LSB 0's to
* guarantee single address bit changes.
* For example, to test a 64-Kbyte
* region, select a base address on a
* 64-Kbyte boundary. Also, select the
* region size as a power-of-two if at
* all possible.
*
* Returns: 0 if the test succeeds, 1 if the test fails.
*/
pattern = (vu_long) 0xaaaaaaaa;
anti_pattern = (vu_long) 0x55555555;
debug("%s:%d: length = 0x%.8lx\n", __func__, __LINE__, num_words);
/*
* Write the default pattern at each of the
* power-of-two offsets.
*/
for (offset = 1; offset < num_words; offset <<= 1)
addr[offset] = pattern;
/*
* Check for address bits stuck high.
*/
test_offset = 0;
addr[test_offset] = anti_pattern;
for (offset = 1; offset < num_words; offset <<= 1) {
temp = addr[offset];
if (temp != pattern) {
printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx\n",
start_addr + offset*sizeof(vu_long),
pattern, temp);
errs++;
if (ctrlc())
return -1;
}
}
addr[test_offset] = pattern;
WATCHDOG_RESET();
/*
* Check for addr bits stuck low or shorted.
*/
for (test_offset = 1; test_offset < num_words; test_offset <<= 1) {
addr[test_offset] = anti_pattern;
for (offset = 1; offset < num_words; offset <<= 1) {
temp = addr[offset];
if ((temp != pattern) && (offset != test_offset)) {
printf("\nFAILURE: Address bit stuck low or"
" shorted @ 0x%.8lx: expected 0x%.8lx,"
" actual 0x%.8lx\n",
start_addr + offset*sizeof(vu_long),
pattern, temp);
errs++;
if (ctrlc())
return -1;
}
}
addr[test_offset] = pattern;
}
/*
* Description: Test the integrity of a physical
* memory device by performing an
* increment/decrement test over the
* entire region. In the process every
* storage bit in the device is tested
* as a zero and a one. The base address
* and the size of the region are
* selected by the caller.
*
* Returns: 0 if the test succeeds, 1 if the test fails.
*/
num_words++;
/*
* Fill memory with a known pattern.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
WATCHDOG_RESET();
addr[offset] = pattern;
}
/*
* Check each location and invert it for the second pass.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
WATCHDOG_RESET();
temp = addr[offset];
if (temp != pattern) {
printf("\nFAILURE (read/write) @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
start_addr + offset*sizeof(vu_long),
pattern, temp);
errs++;
if (ctrlc())
return -1;
}
anti_pattern = ~pattern;
addr[offset] = anti_pattern;
}
/*
* Check each location for the inverted pattern and zero it.
*/
for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) {
WATCHDOG_RESET();
anti_pattern = ~pattern;
temp = addr[offset];
if (temp != anti_pattern) {
printf("\nFAILURE (read/write): @ 0x%.8lx:"
" expected 0x%.8lx, actual 0x%.8lx)\n",
start_addr + offset*sizeof(vu_long),
anti_pattern, temp);
errs++;
if (ctrlc())
return -1;
}
addr[offset] = 0;
}
return errs;
}
static ulong mem_test_quick(vu_long *buf, ulong start_addr, ulong end_addr,
vu_long pattern, int iteration)
{
vu_long *end;
vu_long *addr;
ulong errs = 0;
ulong incr, length;
ulong val, readback;
/* Alternate the pattern */
incr = 1;
if (iteration & 1) {
incr = -incr;
/*
* Flip the pattern each time to make lots of zeros and
* then, the next time, lots of ones. We decrement
* the "negative" patterns and increment the "positive"
* patterns to preserve this feature.
*/
if (pattern & 0x80000000)
pattern = -pattern; /* complement & increment */
else
pattern = ~pattern;
}
length = (end_addr - start_addr) / sizeof(ulong);
end = buf + length;
printf("\rPattern %08lX Writing..."
"%12s"
"\b\b\b\b\b\b\b\b\b\b",
pattern, "");
for (addr = buf, val = pattern; addr < end; addr++) {
WATCHDOG_RESET();
*addr = val;
val += incr;
}
puts("Reading...");
for (addr = buf, val = pattern; addr < end; addr++) {
WATCHDOG_RESET();
readback = *addr;
if (readback != val) {
ulong offset = addr - buf;
printf("\nMem error @ 0x%08X: "
"found %08lX, expected %08lX\n",
(uint)(uintptr_t)(start_addr + offset*sizeof(vu_long)),
readback, val);
errs++;
if (ctrlc())
return -1;
}
val += incr;
}
return errs;
}
/*
* Perform a memory test. A more complete alternative test can be
* configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
* interrupted by ctrl-c or by a failure of one of the sub-tests.
*/
static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
ulong start, end;
vu_long *buf, *dummy;
ulong iteration_limit = 0;
int ret;
ulong errs = 0; /* number of errors, or -1 if interrupted */
ulong pattern = 0;
int iteration;
#if defined(CONFIG_SYS_ALT_MEMTEST)
const int alt_test = 1;
#else
const int alt_test = 0;
#endif
start = CONFIG_SYS_MEMTEST_START;
end = CONFIG_SYS_MEMTEST_END;
if (argc > 1)
if (strict_strtoul(argv[1], 16, &start) < 0)
return CMD_RET_USAGE;
if (argc > 2)
if (strict_strtoul(argv[2], 16, &end) < 0)
return CMD_RET_USAGE;
if (argc > 3)
if (strict_strtoul(argv[3], 16, &pattern) < 0)
return CMD_RET_USAGE;
if (argc > 4)
if (strict_strtoul(argv[4], 16, &iteration_limit) < 0)
return CMD_RET_USAGE;
if (end < start) {
printf("Refusing to do empty test\n");
return -1;
}
printf("Testing %08lx ... %08lx:\n", start, end);
debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__,
start, end);
buf = map_sysmem(start, end - start);
dummy = map_sysmem(CONFIG_SYS_MEMTEST_SCRATCH, sizeof(vu_long));
for (iteration = 0;
!iteration_limit || iteration < iteration_limit;
iteration++) {
if (ctrlc()) {
errs = -1UL;
break;
}
printf("Iteration: %6d\r", iteration + 1);
debug("\n");
if (alt_test) {
errs = mem_test_alt(buf, start, end, dummy);
} else {
errs = mem_test_quick(buf, start, end, pattern,
iteration);
}
if (errs == -1UL)
break;
}
/*
* Work-around for eldk-4.2 which gives this warning if we try to
* case in the unmap_sysmem() call:
* warning: initialization discards qualifiers from pointer target type
*/
{
void *vbuf = (void *)buf;
void *vdummy = (void *)dummy;
unmap_sysmem(vbuf);
unmap_sysmem(vdummy);
}
if (errs == -1UL) {
/* Memory test was aborted - write a newline to finish off */
putc('\n');
ret = 1;
} else {
printf("Tested %d iteration(s) with %lu errors.\n",
iteration, errs);
ret = errs != 0;
}
return ret;
}
#endif /* CONFIG_CMD_MEMTEST */
/* Modify memory.
*
* Syntax:
* mm{.b, .w, .l, .q} {addr}
* nm{.b, .w, .l, .q} {addr}
*/
static int
mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[])
{
ulong addr;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
u64 i;
#else
ulong i;
#endif
int nbytes, size;
void *ptr = NULL;
if (argc != 2)
return CMD_RET_USAGE;
bootretry_reset_cmd_timeout(); /* got a good command to get here */
/* We use the last specified parameters, unless new ones are
* entered.
*/
addr = mm_last_addr;
size = mm_last_size;
if ((flag & CMD_FLAG_REPEAT) == 0) {
/* New command specified. Check for a size specification.
* Defaults to long if no or incorrect specification.
*/
if ((size = cmd_get_data_size(argv[0], 4)) < 0)
return 1;
/* Address is specified since argc > 1
*/
addr = simple_strtoul(argv[1], NULL, 16);
addr += base_address;
}
/* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
do {
ptr = map_sysmem(addr, size);
printf("%08lx:", addr);
if (size == 4)
printf(" %08x", *((u32 *)ptr));
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
else if (size == 8)
printf(" %016" PRIx64, *((u64 *)ptr));
#endif
else if (size == 2)
printf(" %04x", *((u16 *)ptr));
else
printf(" %02x", *((u8 *)ptr));
nbytes = cli_readline(" ? ");
if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
/* <CR> pressed as only input, don't modify current
* location and move to next. "-" pressed will go back.
*/
if (incrflag)
addr += nbytes ? -size : size;
nbytes = 1;
/* good enough to not time out */
bootretry_reset_cmd_timeout();
}
#ifdef CONFIG_BOOT_RETRY_TIME
else if (nbytes == -2) {
break; /* timed out, exit the command */
}
#endif
else {
char *endp;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
i = simple_strtoull(console_buffer, &endp, 16);
#else
i = simple_strtoul(console_buffer, &endp, 16);
#endif
nbytes = endp - console_buffer;
if (nbytes) {
/* good enough to not time out
*/
bootretry_reset_cmd_timeout();
if (size == 4)
*((u32 *)ptr) = i;
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
else if (size == 8)
*((u64 *)ptr) = i;
#endif
else if (size == 2)
*((u16 *)ptr) = i;
else
*((u8 *)ptr) = i;
if (incrflag)
addr += size;
}
}
} while (nbytes);
if (ptr)
unmap_sysmem(ptr);
mm_last_addr = addr;
mm_last_size = size;
return 0;
}
#ifdef CONFIG_CMD_CRC32
static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int flags = 0;
int ac;
char * const *av;
if (argc < 3)
return CMD_RET_USAGE;
av = argv + 1;
ac = argc - 1;
#ifdef CONFIG_CRC32_VERIFY
if (strcmp(*av, "-v") == 0) {
flags |= HASH_FLAG_VERIFY | HASH_FLAG_ENV;
av++;
ac--;
}
#endif
return hash_command("crc32", flags, cmdtp, flag, ac, av);
}
#endif
/**************************************************/
U_BOOT_CMD(
md, 3, 1, do_mem_md,
"memory display",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address [# of objects]"
#else
"[.b, .w, .l] address [# of objects]"
#endif
);
U_BOOT_CMD(
mm, 2, 1, do_mem_mm,
"memory modify (auto-incrementing address)",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address"
#else
"[.b, .w, .l] address"
#endif
);
U_BOOT_CMD(
nm, 2, 1, do_mem_nm,
"memory modify (constant address)",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address"
#else
"[.b, .w, .l] address"
#endif
);
U_BOOT_CMD(
mw, 4, 1, do_mem_mw,
"memory write (fill)",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address value [count]"
#else
"[.b, .w, .l] address value [count]"
#endif
);
U_BOOT_CMD(
cp, 4, 1, do_mem_cp,
"memory copy",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] source target count"
#else
"[.b, .w, .l] source target count"
#endif
);
U_BOOT_CMD(
cmp, 4, 1, do_mem_cmp,
"memory compare",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] addr1 addr2 count"
#else
"[.b, .w, .l] addr1 addr2 count"
#endif
);
#ifdef CONFIG_CMD_CRC32
#ifndef CONFIG_CRC32_VERIFY
U_BOOT_CMD(
crc32, 4, 1, do_mem_crc,
"checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]"
);
#else /* CONFIG_CRC32_VERIFY */
U_BOOT_CMD(
crc32, 5, 1, do_mem_crc,
"checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
"-v address count crc\n - verify crc of memory area"
);
#endif /* CONFIG_CRC32_VERIFY */
#endif
#ifdef CONFIG_CMD_MEMINFO
__weak void board_show_dram(phys_size_t size)
{
puts("DRAM: ");
print_size(size, "\n");
}
static int do_mem_info(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
board_show_dram(gd->ram_size);
return 0;
}
#endif
U_BOOT_CMD(
base, 2, 1, do_mem_base,
"print or set address offset",
"\n - print address offset for memory commands\n"
"base off\n - set address offset for memory commands to 'off'"
);
U_BOOT_CMD(
loop, 3, 1, do_mem_loop,
"infinite loop on address range",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address number_of_objects"
#else
"[.b, .w, .l] address number_of_objects"
#endif
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
loopw, 4, 1, do_mem_loopw,
"infinite write loop on address range",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address number_of_objects data_to_write"
#else
"[.b, .w, .l] address number_of_objects data_to_write"
#endif
);
#endif /* CONFIG_LOOPW */
#ifdef CONFIG_CMD_MEMTEST
U_BOOT_CMD(
mtest, 5, 1, do_mem_mtest,
"simple RAM read/write test",
"[start [end [pattern [iterations]]]]"
);
#endif /* CONFIG_CMD_MEMTEST */
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
mdc, 4, 1, do_mem_mdc,
"memory display cyclic",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address count delay(ms)"
#else
"[.b, .w, .l] address count delay(ms)"
#endif
);
U_BOOT_CMD(
mwc, 4, 1, do_mem_mwc,
"memory write cyclic",
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
"[.b, .w, .l, .q] address value delay(ms)"
#else
"[.b, .w, .l] address value delay(ms)"
#endif
);
#endif /* CONFIG_MX_CYCLIC */
#ifdef CONFIG_CMD_MEMINFO
U_BOOT_CMD(
meminfo, 3, 1, do_mem_info,
"display memory information",
""
);
#endif