// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2016 Freescale Semiconductor, Inc. */ #include <common.h> #include <asm/arch/immap_ls102xa.h> #include <asm/arch/clock.h> #include <asm/arch/fsl_serdes.h> #include <asm/arch/ls102xa_stream_id.h> #include <asm/arch/ls102xa_devdis.h> #include <asm/arch/ls102xa_soc.h> #include <asm/arch/ls102xa_sata.h> #include <fsl_csu.h> #include <fsl_esdhc.h> #include <fsl_immap.h> #include <netdev.h> #include <fsl_mdio.h> #include <tsec.h> #include <spl.h> #include <fsl_validate.h> #include "../common/sleep.h" DECLARE_GLOBAL_DATA_PTR; #define DDR_SIZE 0x40000000 int checkboard(void) { puts("Board: LS1021AIOT\n"); #ifndef CONFIG_QSPI_BOOT struct ccsr_gur *dcfg = (struct ccsr_gur *)CONFIG_SYS_FSL_GUTS_ADDR; u32 cpldrev; cpldrev = in_be32(&dcfg->gpporcr1); printf("CPLD: V%d.%d\n", ((cpldrev >> 28) & 0xf), ((cpldrev >> 24) & 0xf)); #endif return 0; } void ddrmc_init(void) { struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR; u32 temp_sdram_cfg, tmp; out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG); out_be32(&ddr->cs0_bnds, DDR_CS0_BNDS); out_be32(&ddr->cs0_config, DDR_CS0_CONFIG); out_be32(&ddr->timing_cfg_0, DDR_TIMING_CFG_0); out_be32(&ddr->timing_cfg_1, DDR_TIMING_CFG_1); out_be32(&ddr->timing_cfg_2, DDR_TIMING_CFG_2); out_be32(&ddr->timing_cfg_3, DDR_TIMING_CFG_3); out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4); out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5); out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2); out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2); out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE); out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2); out_be32(&ddr->sdram_interval, DDR_SDRAM_INTERVAL); out_be32(&ddr->ddr_wrlvl_cntl, DDR_DDR_WRLVL_CNTL); out_be32(&ddr->ddr_wrlvl_cntl_2, DDR_DDR_WRLVL_CNTL_2); out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3); out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1); out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL); out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL); out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2); /* DDR erratum A-009942 */ tmp = in_be32(&ddr->debug[28]); out_be32(&ddr->debug[28], tmp | 0x0070006f); udelay(500); temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN & ~SDRAM_CFG_BI); out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | temp_sdram_cfg); } int dram_init(void) { #if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) ddrmc_init(); #endif gd->ram_size = DDR_SIZE; return 0; } #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[1] = { {CONFIG_SYS_FSL_ESDHC_ADDR}, }; int board_mmc_init(bd_t *bis) { esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); } #endif #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[4]; int num = 0; #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); if (is_serdes_configured(SGMII_TSEC1)) { puts("eTSEC1 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; } num++; #endif #ifdef CONFIG_TSEC2 SET_STD_TSEC_INFO(tsec_info[num], 2); if (is_serdes_configured(SGMII_TSEC2)) { puts("eTSEC2 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; } num++; #endif if (!num) { printf("No TSECs initialized\n"); return 0; } mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; mdio_info.name = DEFAULT_MII_NAME; fsl_pq_mdio_init(bis, &mdio_info); tsec_eth_init(bis, tsec_info, num); return pci_eth_init(bis); } #endif int board_early_init_f(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; #ifdef CONFIG_TSEC_ENET /* clear BD & FR bits for BE BD's and frame data */ clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); #endif arch_soc_init(); return 0; } #ifdef CONFIG_SPL_BUILD void board_init_f(ulong dummy) { /* Clear the BSS */ memset(__bss_start, 0, __bss_end - __bss_start); get_clocks(); preloader_console_init(); dram_init(); /* Allow OCRAM access permission as R/W */ #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); #endif board_init_r(NULL, 0); } #endif int board_init(void) { #ifndef CONFIG_SYS_FSL_NO_SERDES fsl_serdes_init(); #endif ls102xa_smmu_stream_id_init(); return 0; } #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { #ifdef CONFIG_SCSI_AHCI_PLAT ls1021a_sata_init(); #endif return 0; } #endif #if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { #ifdef CONFIG_FSL_DEVICE_DISABLE device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl)); #endif #ifdef CONFIG_FSL_CAAM return sec_init(); #endif } #endif int ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif return 0; } void flash_write16(u16 val, void *addr) { u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00)); __raw_writew(shftval, addr); } u16 flash_read16(void *addr) { u16 val = __raw_readw(addr); return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); }