:mod:`unittest` --- Unit testing framework
==========================================
.. module:: unittest
:synopsis: Unit testing framework for Python.
.. moduleauthor:: Steve Purcell <stephen_purcell@yahoo.com>
.. sectionauthor:: Steve Purcell <stephen_purcell@yahoo.com>
.. sectionauthor:: Fred L. Drake, Jr. <fdrake@acm.org>
.. sectionauthor:: Raymond Hettinger <python@rcn.com>
.. versionadded:: 2.1
(If you are already familiar with the basic concepts of testing, you might want
to skip to :ref:`the list of assert methods <assert-methods>`.)
The Python unit testing framework, sometimes referred to as "PyUnit," is a
Python language version of JUnit, by Kent Beck and Erich Gamma. JUnit is, in
turn, a Java version of Kent's Smalltalk testing framework. Each is the de
facto standard unit testing framework for its respective language.
:mod:`unittest` supports test automation, sharing of setup and shutdown code for
tests, aggregation of tests into collections, and independence of the tests from
the reporting framework. The :mod:`unittest` module provides classes that make
it easy to support these qualities for a set of tests.
To achieve this, :mod:`unittest` supports some important concepts:
test fixture
A :dfn:`test fixture` represents the preparation needed to perform one or more
tests, and any associate cleanup actions. This may involve, for example,
creating temporary or proxy databases, directories, or starting a server
process.
test case
A :dfn:`test case` is the smallest unit of testing. It checks for a specific
response to a particular set of inputs. :mod:`unittest` provides a base class,
:class:`TestCase`, which may be used to create new test cases.
test suite
A :dfn:`test suite` is a collection of test cases, test suites, or both. It is
used to aggregate tests that should be executed together.
test runner
A :dfn:`test runner` is a component which orchestrates the execution of tests
and provides the outcome to the user. The runner may use a graphical interface,
a textual interface, or return a special value to indicate the results of
executing the tests.
The test case and test fixture concepts are supported through the
:class:`TestCase` and :class:`FunctionTestCase` classes; the former should be
used when creating new tests, and the latter can be used when integrating
existing test code with a :mod:`unittest`\ -driven framework. When building test
fixtures using :class:`TestCase`, the :meth:`~TestCase.setUp` and
:meth:`~TestCase.tearDown` methods can be overridden to provide initialization
and cleanup for the fixture. With :class:`FunctionTestCase`, existing functions
can be passed to the constructor for these purposes. When the test is run, the
fixture initialization is run first; if it succeeds, the cleanup method is run
after the test has been executed, regardless of the outcome of the test. Each
instance of the :class:`TestCase` will only be used to run a single test method,
so a new fixture is created for each test.
Test suites are implemented by the :class:`TestSuite` class. This class allows
individual tests and test suites to be aggregated; when the suite is executed,
all tests added directly to the suite and in "child" test suites are run.
A test runner is an object that provides a single method,
:meth:`~TestRunner.run`, which accepts a :class:`TestCase` or :class:`TestSuite`
object as a parameter, and returns a result object. The class
:class:`TestResult` is provided for use as the result object. :mod:`unittest`
provides the :class:`TextTestRunner` as an example test runner which reports
test results on the standard error stream by default. Alternate runners can be
implemented for other environments (such as graphical environments) without any
need to derive from a specific class.
.. seealso::
Module :mod:`doctest`
Another test-support module with a very different flavor.
`unittest2: A backport of new unittest features for Python 2.4-2.6 <https://pypi.org/project/unittest2>`_
Many new features were added to unittest in Python 2.7, including test
discovery. unittest2 allows you to use these features with earlier
versions of Python.
`Simple Smalltalk Testing: With Patterns <https://web.archive.org/web/20150315073817/http://www.xprogramming.com/testfram.htm>`_
Kent Beck's original paper on testing frameworks using the pattern shared
by :mod:`unittest`.
`Nose <https://nose.readthedocs.org/en/latest/>`_ and `py.test <http://pytest.org>`_
Third-party unittest frameworks with a lighter-weight syntax for writing
tests. For example, ``assert func(10) == 42``.
`The Python Testing Tools Taxonomy <https://wiki.python.org/moin/PythonTestingToolsTaxonomy>`_
An extensive list of Python testing tools including functional testing
frameworks and mock object libraries.
`Testing in Python Mailing List <http://lists.idyll.org/listinfo/testing-in-python>`_
A special-interest-group for discussion of testing, and testing tools,
in Python.
.. _unittest-minimal-example:
Basic example
-------------
The :mod:`unittest` module provides a rich set of tools for constructing and
running tests. This section demonstrates that a small subset of the tools
suffice to meet the needs of most users.
Here is a short script to test three string methods::
import unittest
class TestStringMethods(unittest.TestCase):
def test_upper(self):
self.assertEqual('foo'.upper(), 'FOO')
def test_isupper(self):
self.assertTrue('FOO'.isupper())
self.assertFalse('Foo'.isupper())
def test_split(self):
s = 'hello world'
self.assertEqual(s.split(), ['hello', 'world'])
# check that s.split fails when the separator is not a string
with self.assertRaises(TypeError):
s.split(2)
if __name__ == '__main__':
unittest.main()
A testcase is created by subclassing :class:`unittest.TestCase`. The three
individual tests are defined with methods whose names start with the letters
``test``. This naming convention informs the test runner about which methods
represent tests.
The crux of each test is a call to :meth:`~TestCase.assertEqual` to check for an
expected result; :meth:`~TestCase.assertTrue` or :meth:`~TestCase.assertFalse`
to verify a condition; or :meth:`~TestCase.assertRaises` to verify that a
specific exception gets raised. These methods are used instead of the
:keyword:`assert` statement so the test runner can accumulate all test results
and produce a report.
The :meth:`~TestCase.setUp` and :meth:`~TestCase.tearDown` methods allow you
to define instructions that will be executed before and after each test method.
They are covered in more detail in the section :ref:`organizing-tests`.
The final block shows a simple way to run the tests. :func:`unittest.main`
provides a command-line interface to the test script. When run from the command
line, the above script produces an output that looks like this::
...
----------------------------------------------------------------------
Ran 3 tests in 0.000s
OK
Instead of :func:`unittest.main`, there are other ways to run the tests with a
finer level of control, less terse output, and no requirement to be run from the
command line. For example, the last two lines may be replaced with::
suite = unittest.TestLoader().loadTestsFromTestCase(TestStringMethods)
unittest.TextTestRunner(verbosity=2).run(suite)
Running the revised script from the interpreter or another script produces the
following output::
test_isupper (__main__.TestStringMethods) ... ok
test_split (__main__.TestStringMethods) ... ok
test_upper (__main__.TestStringMethods) ... ok
----------------------------------------------------------------------
Ran 3 tests in 0.001s
OK
The above examples show the most commonly used :mod:`unittest` features which
are sufficient to meet many everyday testing needs. The remainder of the
documentation explores the full feature set from first principles.
.. _unittest-command-line-interface:
Command-Line Interface
----------------------
The unittest module can be used from the command line to run tests from
modules, classes or even individual test methods::
python -m unittest test_module1 test_module2
python -m unittest test_module.TestClass
python -m unittest test_module.TestClass.test_method
You can pass in a list with any combination of module names, and fully
qualified class or method names.
You can run tests with more detail (higher verbosity) by passing in the -v flag::
python -m unittest -v test_module
For a list of all the command-line options::
python -m unittest -h
.. versionchanged:: 2.7
In earlier versions it was only possible to run individual test methods and
not modules or classes.
Command-line options
~~~~~~~~~~~~~~~~~~~~
:program:`unittest` supports these command-line options:
.. program:: unittest
.. cmdoption:: -b, --buffer
The standard output and standard error streams are buffered during the test
run. Output during a passing test is discarded. Output is echoed normally
on test fail or error and is added to the failure messages.
.. cmdoption:: -c, --catch
:kbd:`Control-C` during the test run waits for the current test to end and then
reports all the results so far. A second :kbd:`Control-C` raises the normal
:exc:`KeyboardInterrupt` exception.
See `Signal Handling`_ for the functions that provide this functionality.
.. cmdoption:: -f, --failfast
Stop the test run on the first error or failure.
.. versionadded:: 2.7
The command-line options ``-b``, ``-c`` and ``-f`` were added.
The command line can also be used for test discovery, for running all of the
tests in a project or just a subset.
.. _unittest-test-discovery:
Test Discovery
--------------
.. versionadded:: 2.7
Unittest supports simple test discovery. In order to be compatible with test
discovery, all of the test files must be :ref:`modules <tut-modules>` or
:ref:`packages <tut-packages>` importable from the top-level directory of
the project (this means that their filenames must be valid
:ref:`identifiers <identifiers>`).
Test discovery is implemented in :meth:`TestLoader.discover`, but can also be
used from the command line. The basic command-line usage is::
cd project_directory
python -m unittest discover
The ``discover`` sub-command has the following options:
.. program:: unittest discover
.. cmdoption:: -v, --verbose
Verbose output
.. cmdoption:: -s, --start-directory directory
Directory to start discovery (``.`` default)
.. cmdoption:: -p, --pattern pattern
Pattern to match test files (``test*.py`` default)
.. cmdoption:: -t, --top-level-directory directory
Top level directory of project (defaults to start directory)
The :option:`-s`, :option:`-p`, and :option:`-t` options can be passed in
as positional arguments in that order. The following two command lines
are equivalent::
python -m unittest discover -s project_directory -p "*_test.py"
python -m unittest discover project_directory "*_test.py"
As well as being a path it is possible to pass a package name, for example
``myproject.subpackage.test``, as the start directory. The package name you
supply will then be imported and its location on the filesystem will be used
as the start directory.
.. caution::
Test discovery loads tests by importing them. Once test discovery has
found all the test files from the start directory you specify it turns the
paths into package names to import. For example :file:`foo/bar/baz.py` will be
imported as ``foo.bar.baz``.
If you have a package installed globally and attempt test discovery on
a different copy of the package then the import *could* happen from the
wrong place. If this happens test discovery will warn you and exit.
If you supply the start directory as a package name rather than a
path to a directory then discover assumes that whichever location it
imports from is the location you intended, so you will not get the
warning.
Test modules and packages can customize test loading and discovery by through
the `load_tests protocol`_.
.. _organizing-tests:
Organizing test code
--------------------
The basic building blocks of unit testing are :dfn:`test cases` --- single
scenarios that must be set up and checked for correctness. In :mod:`unittest`,
test cases are represented by instances of :mod:`unittest`'s :class:`TestCase`
class. To make your own test cases you must write subclasses of
:class:`TestCase`, or use :class:`FunctionTestCase`.
An instance of a :class:`TestCase`\ -derived class is an object that can
completely run a single test method, together with optional set-up and tidy-up
code.
The testing code of a :class:`TestCase` instance should be entirely self
contained, such that it can be run either in isolation or in arbitrary
combination with any number of other test cases.
The simplest :class:`TestCase` subclass will simply override the
:meth:`~TestCase.runTest` method in order to perform specific testing code::
import unittest
class DefaultWidgetSizeTestCase(unittest.TestCase):
def runTest(self):
widget = Widget('The widget')
self.assertEqual(widget.size(), (50, 50), 'incorrect default size')
Note that in order to test something, we use one of the :meth:`assert\*`
methods provided by the :class:`TestCase` base class. If the test fails, an
exception will be raised, and :mod:`unittest` will identify the test case as a
:dfn:`failure`. Any other exceptions will be treated as :dfn:`errors`. This
helps you identify where the problem is: :dfn:`failures` are caused by incorrect
results - a 5 where you expected a 6. :dfn:`Errors` are caused by incorrect
code - e.g., a :exc:`TypeError` caused by an incorrect function call.
The way to run a test case will be described later. For now, note that to
construct an instance of such a test case, we call its constructor without
arguments::
testCase = DefaultWidgetSizeTestCase()
Now, such test cases can be numerous, and their set-up can be repetitive. In
the above case, constructing a :class:`Widget` in each of 100 Widget test case
subclasses would mean unsightly duplication.
Luckily, we can factor out such set-up code by implementing a method called
:meth:`~TestCase.setUp`, which the testing framework will automatically call for
us when we run the test::
import unittest
class SimpleWidgetTestCase(unittest.TestCase):
def setUp(self):
self.widget = Widget('The widget')
class DefaultWidgetSizeTestCase(SimpleWidgetTestCase):
def runTest(self):
self.assertEqual(self.widget.size(), (50,50),
'incorrect default size')
class WidgetResizeTestCase(SimpleWidgetTestCase):
def runTest(self):
self.widget.resize(100,150)
self.assertEqual(self.widget.size(), (100,150),
'wrong size after resize')
If the :meth:`~TestCase.setUp` method raises an exception while the test is
running, the framework will consider the test to have suffered an error, and the
:meth:`~TestCase.runTest` method will not be executed.
Similarly, we can provide a :meth:`~TestCase.tearDown` method that tidies up
after the :meth:`~TestCase.runTest` method has been run::
import unittest
class SimpleWidgetTestCase(unittest.TestCase):
def setUp(self):
self.widget = Widget('The widget')
def tearDown(self):
self.widget.dispose()
self.widget = None
If :meth:`~TestCase.setUp` succeeded, the :meth:`~TestCase.tearDown` method will
be run whether :meth:`~TestCase.runTest` succeeded or not.
Such a working environment for the testing code is called a :dfn:`fixture`.
Often, many small test cases will use the same fixture. In this case, we would
end up subclassing :class:`SimpleWidgetTestCase` into many small one-method
classes such as :class:`DefaultWidgetSizeTestCase`. This is time-consuming and
discouraging, so in the same vein as JUnit, :mod:`unittest` provides a simpler
mechanism::
import unittest
class WidgetTestCase(unittest.TestCase):
def setUp(self):
self.widget = Widget('The widget')
def tearDown(self):
self.widget.dispose()
self.widget = None
def test_default_size(self):
self.assertEqual(self.widget.size(), (50,50),
'incorrect default size')
def test_resize(self):
self.widget.resize(100,150)
self.assertEqual(self.widget.size(), (100,150),
'wrong size after resize')
Here we have not provided a :meth:`~TestCase.runTest` method, but have instead
provided two different test methods. Class instances will now each run one of
the :meth:`test_\*` methods, with ``self.widget`` created and destroyed
separately for each instance. When creating an instance we must specify the
test method it is to run. We do this by passing the method name in the
constructor::
defaultSizeTestCase = WidgetTestCase('test_default_size')
resizeTestCase = WidgetTestCase('test_resize')
Test case instances are grouped together according to the features they test.
:mod:`unittest` provides a mechanism for this: the :dfn:`test suite`,
represented by :mod:`unittest`'s :class:`TestSuite` class::
widgetTestSuite = unittest.TestSuite()
widgetTestSuite.addTest(WidgetTestCase('test_default_size'))
widgetTestSuite.addTest(WidgetTestCase('test_resize'))
For the ease of running tests, as we will see later, it is a good idea to
provide in each test module a callable object that returns a pre-built test
suite::
def suite():
suite = unittest.TestSuite()
suite.addTest(WidgetTestCase('test_default_size'))
suite.addTest(WidgetTestCase('test_resize'))
return suite
or even::
def suite():
tests = ['test_default_size', 'test_resize']
return unittest.TestSuite(map(WidgetTestCase, tests))
Since it is a common pattern to create a :class:`TestCase` subclass with many
similarly named test functions, :mod:`unittest` provides a :class:`TestLoader`
class that can be used to automate the process of creating a test suite and
populating it with individual tests. For example, ::
suite = unittest.TestLoader().loadTestsFromTestCase(WidgetTestCase)
will create a test suite that will run ``WidgetTestCase.test_default_size()`` and
``WidgetTestCase.test_resize``. :class:`TestLoader` uses the ``'test'`` method
name prefix to identify test methods automatically.
Note that the order in which the various test cases will be run is
determined by sorting the test function names with respect to the
built-in ordering for strings.
Often it is desirable to group suites of test cases together, so as to run tests
for the whole system at once. This is easy, since :class:`TestSuite` instances
can be added to a :class:`TestSuite` just as :class:`TestCase` instances can be
added to a :class:`TestSuite`::
suite1 = module1.TheTestSuite()
suite2 = module2.TheTestSuite()
alltests = unittest.TestSuite([suite1, suite2])
You can place the definitions of test cases and test suites in the same modules
as the code they are to test (such as :file:`widget.py`), but there are several
advantages to placing the test code in a separate module, such as
:file:`test_widget.py`:
* The test module can be run standalone from the command line.
* The test code can more easily be separated from shipped code.
* There is less temptation to change test code to fit the code it tests without
a good reason.
* Test code should be modified much less frequently than the code it tests.
* Tested code can be refactored more easily.
* Tests for modules written in C must be in separate modules anyway, so why not
be consistent?
* If the testing strategy changes, there is no need to change the source code.
.. _legacy-unit-tests:
Re-using old test code
----------------------
Some users will find that they have existing test code that they would like to
run from :mod:`unittest`, without converting every old test function to a
:class:`TestCase` subclass.
For this reason, :mod:`unittest` provides a :class:`FunctionTestCase` class.
This subclass of :class:`TestCase` can be used to wrap an existing test
function. Set-up and tear-down functions can also be provided.
Given the following test function::
def testSomething():
something = makeSomething()
assert something.name is not None
# ...
one can create an equivalent test case instance as follows::
testcase = unittest.FunctionTestCase(testSomething)
If there are additional set-up and tear-down methods that should be called as
part of the test case's operation, they can also be provided like so::
testcase = unittest.FunctionTestCase(testSomething,
setUp=makeSomethingDB,
tearDown=deleteSomethingDB)
To make migrating existing test suites easier, :mod:`unittest` supports tests
raising :exc:`AssertionError` to indicate test failure. However, it is
recommended that you use the explicit :meth:`TestCase.fail\*` and
:meth:`TestCase.assert\*` methods instead, as future versions of :mod:`unittest`
may treat :exc:`AssertionError` differently.
.. note::
Even though :class:`FunctionTestCase` can be used to quickly convert an
existing test base over to a :mod:`unittest`\ -based system, this approach is
not recommended. Taking the time to set up proper :class:`TestCase`
subclasses will make future test refactorings infinitely easier.
In some cases, the existing tests may have been written using the :mod:`doctest`
module. If so, :mod:`doctest` provides a :class:`DocTestSuite` class that can
automatically build :class:`unittest.TestSuite` instances from the existing
:mod:`doctest`\ -based tests.
.. _unittest-skipping:
Skipping tests and expected failures
------------------------------------
.. versionadded:: 2.7
Unittest supports skipping individual test methods and even whole classes of
tests. In addition, it supports marking a test as an "expected failure," a test
that is broken and will fail, but shouldn't be counted as a failure on a
:class:`TestResult`.
Skipping a test is simply a matter of using the :func:`skip` :term:`decorator`
or one of its conditional variants.
Basic skipping looks like this::
class MyTestCase(unittest.TestCase):
@unittest.skip("demonstrating skipping")
def test_nothing(self):
self.fail("shouldn't happen")
@unittest.skipIf(mylib.__version__ < (1, 3),
"not supported in this library version")
def test_format(self):
# Tests that work for only a certain version of the library.
pass
@unittest.skipUnless(sys.platform.startswith("win"), "requires Windows")
def test_windows_support(self):
# windows specific testing code
pass
This is the output of running the example above in verbose mode::
test_format (__main__.MyTestCase) ... skipped 'not supported in this library version'
test_nothing (__main__.MyTestCase) ... skipped 'demonstrating skipping'
test_windows_support (__main__.MyTestCase) ... skipped 'requires Windows'
----------------------------------------------------------------------
Ran 3 tests in 0.005s
OK (skipped=3)
Classes can be skipped just like methods::
@unittest.skip("showing class skipping")
class MySkippedTestCase(unittest.TestCase):
def test_not_run(self):
pass
:meth:`TestCase.setUp` can also skip the test. This is useful when a resource
that needs to be set up is not available.
Expected failures use the :func:`expectedFailure` decorator. ::
class ExpectedFailureTestCase(unittest.TestCase):
@unittest.expectedFailure
def test_fail(self):
self.assertEqual(1, 0, "broken")
It's easy to roll your own skipping decorators by making a decorator that calls
:func:`skip` on the test when it wants it to be skipped. This decorator skips
the test unless the passed object has a certain attribute::
def skipUnlessHasattr(obj, attr):
if hasattr(obj, attr):
return lambda func: func
return unittest.skip("{!r} doesn't have {!r}".format(obj, attr))
The following decorators implement test skipping and expected failures:
.. function:: skip(reason)
Unconditionally skip the decorated test. *reason* should describe why the
test is being skipped.
.. function:: skipIf(condition, reason)
Skip the decorated test if *condition* is true.
.. function:: skipUnless(condition, reason)
Skip the decorated test unless *condition* is true.
.. function:: expectedFailure
Mark the test as an expected failure. If the test fails when run, the test
is not counted as a failure.
.. exception:: SkipTest(reason)
This exception is raised to skip a test.
Usually you can use :meth:`TestCase.skipTest` or one of the skipping
decorators instead of raising this directly.
Skipped tests will not have :meth:`setUp` or :meth:`tearDown` run around them.
Skipped classes will not have :meth:`setUpClass` or :meth:`tearDownClass` run.
.. _unittest-contents:
Classes and functions
---------------------
This section describes in depth the API of :mod:`unittest`.
.. _testcase-objects:
Test cases
~~~~~~~~~~
.. class:: TestCase(methodName='runTest')
Instances of the :class:`TestCase` class represent the smallest testable units
in the :mod:`unittest` universe. This class is intended to be used as a base
class, with specific tests being implemented by concrete subclasses. This class
implements the interface needed by the test runner to allow it to drive the
test, and methods that the test code can use to check for and report various
kinds of failure.
Each instance of :class:`TestCase` will run a single test method: the method
named *methodName*. If you remember, we had an earlier example that went
something like this::
def suite():
suite = unittest.TestSuite()
suite.addTest(WidgetTestCase('test_default_size'))
suite.addTest(WidgetTestCase('test_resize'))
return suite
Here, we create two instances of :class:`WidgetTestCase`, each of which runs a
single test.
*methodName* defaults to :meth:`runTest`.
:class:`TestCase` instances provide three groups of methods: one group used
to run the test, another used by the test implementation to check conditions
and report failures, and some inquiry methods allowing information about the
test itself to be gathered.
Methods in the first group (running the test) are:
.. method:: setUp()
Method called to prepare the test fixture. This is called immediately
before calling the test method; other than :exc:`AssertionError` or :exc:`SkipTest`,
any exception raised by this method will be considered an error rather than
a test failure. The default implementation does nothing.
.. method:: tearDown()
Method called immediately after the test method has been called and the
result recorded. This is called even if the test method raised an
exception, so the implementation in subclasses may need to be particularly
careful about checking internal state. Any exception, other than
:exc:`AssertionError` or :exc:`SkipTest`, raised by this method will be
considered an additional error rather than a test failure (thus increasing
the total number of reported errors). This method will only be called if
the :meth:`setUp` succeeds, regardless of the outcome of the test method.
The default implementation does nothing.
.. method:: setUpClass()
A class method called before tests in an individual class are run.
``setUpClass`` is called with the class as the only argument
and must be decorated as a :func:`classmethod`::
@classmethod
def setUpClass(cls):
...
See `Class and Module Fixtures`_ for more details.
.. versionadded:: 2.7
.. method:: tearDownClass()
A class method called after tests in an individual class have run.
``tearDownClass`` is called with the class as the only argument
and must be decorated as a :meth:`classmethod`::
@classmethod
def tearDownClass(cls):
...
See `Class and Module Fixtures`_ for more details.
.. versionadded:: 2.7
.. method:: run(result=None)
Run the test, collecting the result into the test result object passed as
*result*. If *result* is omitted or ``None``, a temporary result
object is created (by calling the :meth:`defaultTestResult` method) and
used. The result object is not returned to :meth:`run`'s caller.
The same effect may be had by simply calling the :class:`TestCase`
instance.
.. method:: skipTest(reason)
Calling this during a test method or :meth:`setUp` skips the current
test. See :ref:`unittest-skipping` for more information.
.. versionadded:: 2.7
.. method:: debug()
Run the test without collecting the result. This allows exceptions raised
by the test to be propagated to the caller, and can be used to support
running tests under a debugger.
.. _assert-methods:
The :class:`TestCase` class provides several assert methods to check for and
report failures. The following table lists the most commonly used methods
(see the tables below for more assert methods):
+-----------------------------------------+-----------------------------+---------------+
| Method | Checks that | New in |
+=========================================+=============================+===============+
| :meth:`assertEqual(a, b) | ``a == b`` | |
| <TestCase.assertEqual>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertNotEqual(a, b) | ``a != b`` | |
| <TestCase.assertNotEqual>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertTrue(x) | ``bool(x) is True`` | |
| <TestCase.assertTrue>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertFalse(x) | ``bool(x) is False`` | |
| <TestCase.assertFalse>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertIs(a, b) | ``a is b`` | 2.7 |
| <TestCase.assertIs>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertIsNot(a, b) | ``a is not b`` | 2.7 |
| <TestCase.assertIsNot>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertIsNone(x) | ``x is None`` | 2.7 |
| <TestCase.assertIsNone>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertIsNotNone(x) | ``x is not None`` | 2.7 |
| <TestCase.assertIsNotNone>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertIn(a, b) | ``a in b`` | 2.7 |
| <TestCase.assertIn>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertNotIn(a, b) | ``a not in b`` | 2.7 |
| <TestCase.assertNotIn>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertIsInstance(a, b) | ``isinstance(a, b)`` | 2.7 |
| <TestCase.assertIsInstance>` | | |
+-----------------------------------------+-----------------------------+---------------+
| :meth:`assertNotIsInstance(a, b) | ``not isinstance(a, b)`` | 2.7 |
| <TestCase.assertNotIsInstance>` | | |
+-----------------------------------------+-----------------------------+---------------+
All the assert methods (except :meth:`assertRaises`,
:meth:`assertRaisesRegexp`)
accept a *msg* argument that, if specified, is used as the error message on
failure (see also :data:`longMessage`).
.. method:: assertEqual(first, second, msg=None)
Test that *first* and *second* are equal. If the values do not compare
equal, the test will fail.
In addition, if *first* and *second* are the exact same type and one of
list, tuple, dict, set, frozenset or unicode or any type that a subclass
registers with :meth:`addTypeEqualityFunc` the type-specific equality
function will be called in order to generate a more useful default
error message (see also the :ref:`list of type-specific methods
<type-specific-methods>`).
.. versionchanged:: 2.7
Added the automatic calling of type-specific equality function.
.. method:: assertNotEqual(first, second, msg=None)
Test that *first* and *second* are not equal. If the values do compare
equal, the test will fail.
.. method:: assertTrue(expr, msg=None)
assertFalse(expr, msg=None)
Test that *expr* is true (or false).
Note that this is equivalent to ``bool(expr) is True`` and not to ``expr
is True`` (use ``assertIs(expr, True)`` for the latter). This method
should also be avoided when more specific methods are available (e.g.
``assertEqual(a, b)`` instead of ``assertTrue(a == b)``), because they
provide a better error message in case of failure.
.. method:: assertIs(first, second, msg=None)
assertIsNot(first, second, msg=None)
Test that *first* and *second* evaluate (or don't evaluate) to the same object.
.. versionadded:: 2.7
.. method:: assertIsNone(expr, msg=None)
assertIsNotNone(expr, msg=None)
Test that *expr* is (or is not) ``None``.
.. versionadded:: 2.7
.. method:: assertIn(first, second, msg=None)
assertNotIn(first, second, msg=None)
Test that *first* is (or is not) in *second*.
.. versionadded:: 2.7
.. method:: assertIsInstance(obj, cls, msg=None)
assertNotIsInstance(obj, cls, msg=None)
Test that *obj* is (or is not) an instance of *cls* (which can be a
class or a tuple of classes, as supported by :func:`isinstance`).
To check for the exact type, use :func:`assertIs(type(obj), cls) <assertIs>`.
.. versionadded:: 2.7
It is also possible to check that exceptions and warnings are raised using
the following methods:
+---------------------------------------------------------+--------------------------------------+------------+
| Method | Checks that | New in |
+=========================================================+======================================+============+
| :meth:`assertRaises(exc, fun, *args, **kwds) | ``fun(*args, **kwds)`` raises *exc* | |
| <TestCase.assertRaises>` | | |
+---------------------------------------------------------+--------------------------------------+------------+
| :meth:`assertRaisesRegexp(exc, r, fun, *args, **kwds) | ``fun(*args, **kwds)`` raises *exc* | 2.7 |
| <TestCase.assertRaisesRegexp>` | and the message matches regex *r* | |
+---------------------------------------------------------+--------------------------------------+------------+
.. method:: assertRaises(exception, callable, *args, **kwds)
assertRaises(exception)
Test that an exception is raised when *callable* is called with any
positional or keyword arguments that are also passed to
:meth:`assertRaises`. The test passes if *exception* is raised, is an
error if another exception is raised, or fails if no exception is raised.
To catch any of a group of exceptions, a tuple containing the exception
classes may be passed as *exception*.
If only the *exception* argument is given, returns a context manager so
that the code under test can be written inline rather than as a function::
with self.assertRaises(SomeException):
do_something()
The context manager will store the caught exception object in its
:attr:`exception` attribute. This can be useful if the intention
is to perform additional checks on the exception raised::
with self.assertRaises(SomeException) as cm:
do_something()
the_exception = cm.exception
self.assertEqual(the_exception.error_code, 3)
.. versionchanged:: 2.7
Added the ability to use :meth:`assertRaises` as a context manager.
.. method:: assertRaisesRegexp(exception, regexp, callable, *args, **kwds)
assertRaisesRegexp(exception, regexp)
Like :meth:`assertRaises` but also tests that *regexp* matches
on the string representation of the raised exception. *regexp* may be
a regular expression object or a string containing a regular expression
suitable for use by :func:`re.search`. Examples::
self.assertRaisesRegexp(ValueError, "invalid literal for.*XYZ'$",
int, 'XYZ')
or::
with self.assertRaisesRegexp(ValueError, 'literal'):
int('XYZ')
.. versionadded:: 2.7
There are also other methods used to perform more specific checks, such as:
+---------------------------------------+--------------------------------+--------------+
| Method | Checks that | New in |
+=======================================+================================+==============+
| :meth:`assertAlmostEqual(a, b) | ``round(a-b, 7) == 0`` | |
| <TestCase.assertAlmostEqual>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertNotAlmostEqual(a, b) | ``round(a-b, 7) != 0`` | |
| <TestCase.assertNotAlmostEqual>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertGreater(a, b) | ``a > b`` | 2.7 |
| <TestCase.assertGreater>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertGreaterEqual(a, b) | ``a >= b`` | 2.7 |
| <TestCase.assertGreaterEqual>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertLess(a, b) | ``a < b`` | 2.7 |
| <TestCase.assertLess>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertLessEqual(a, b) | ``a <= b`` | 2.7 |
| <TestCase.assertLessEqual>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertRegexpMatches(s, r) | ``r.search(s)`` | 2.7 |
| <TestCase.assertRegexpMatches>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertNotRegexpMatches(s, r) | ``not r.search(s)`` | 2.7 |
| <TestCase.assertNotRegexpMatches>` | | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertItemsEqual(a, b) | sorted(a) == sorted(b) and | 2.7 |
| <TestCase.assertItemsEqual>` | works with unhashable objs | |
+---------------------------------------+--------------------------------+--------------+
| :meth:`assertDictContainsSubset(a, b) | all the key/value pairs | 2.7 |
| <TestCase.assertDictContainsSubset>` | in *a* exist in *b* | |
+---------------------------------------+--------------------------------+--------------+
.. method:: assertAlmostEqual(first, second, places=7, msg=None, delta=None)
assertNotAlmostEqual(first, second, places=7, msg=None, delta=None)
Test that *first* and *second* are approximately (or not approximately)
equal by computing the difference, rounding to the given number of
decimal *places* (default 7), and comparing to zero. Note that these
methods round the values to the given number of *decimal places* (i.e.
like the :func:`round` function) and not *significant digits*.
If *delta* is supplied instead of *places* then the difference
between *first* and *second* must be less or equal to (or greater than) *delta*.
Supplying both *delta* and *places* raises a ``TypeError``.
.. versionchanged:: 2.7
:meth:`assertAlmostEqual` automatically considers almost equal objects
that compare equal. :meth:`assertNotAlmostEqual` automatically fails
if the objects compare equal. Added the *delta* keyword argument.
.. method:: assertGreater(first, second, msg=None)
assertGreaterEqual(first, second, msg=None)
assertLess(first, second, msg=None)
assertLessEqual(first, second, msg=None)
Test that *first* is respectively >, >=, < or <= than *second* depending
on the method name. If not, the test will fail::
>>> self.assertGreaterEqual(3, 4)
AssertionError: "3" unexpectedly not greater than or equal to "4"
.. versionadded:: 2.7
.. method:: assertRegexpMatches(text, regexp, msg=None)
Test that a *regexp* search matches *text*. In case
of failure, the error message will include the pattern and the *text* (or
the pattern and the part of *text* that unexpectedly matched). *regexp*
may be a regular expression object or a string containing a regular
expression suitable for use by :func:`re.search`.
.. versionadded:: 2.7
.. method:: assertNotRegexpMatches(text, regexp, msg=None)
Verifies that a *regexp* search does not match *text*. Fails with an error
message including the pattern and the part of *text* that matches. *regexp*
may be a regular expression object or a string containing a regular
expression suitable for use by :func:`re.search`.
.. versionadded:: 2.7
.. method:: assertItemsEqual(actual, expected, msg=None)
Test that sequence *expected* contains the same elements as *actual*,
regardless of their order. When they don't, an error message listing the
differences between the sequences will be generated.
Duplicate elements are *not* ignored when comparing *actual* and
*expected*. It verifies if each element has the same count in both
sequences. It is the equivalent of ``assertEqual(sorted(expected),
sorted(actual))`` but it works with sequences of unhashable objects as
well.
In Python 3, this method is named ``assertCountEqual``.
.. versionadded:: 2.7
.. method:: assertDictContainsSubset(expected, actual, msg=None)
Tests whether the key/value pairs in dictionary *actual* are a
superset of those in *expected*. If not, an error message listing
the missing keys and mismatched values is generated.
.. versionadded:: 2.7
.. deprecated:: 3.2
.. _type-specific-methods:
The :meth:`assertEqual` method dispatches the equality check for objects of
the same type to different type-specific methods. These methods are already
implemented for most of the built-in types, but it's also possible to
register new methods using :meth:`addTypeEqualityFunc`:
.. method:: addTypeEqualityFunc(typeobj, function)
Registers a type-specific method called by :meth:`assertEqual` to check
if two objects of exactly the same *typeobj* (not subclasses) compare
equal. *function* must take two positional arguments and a third msg=None
keyword argument just as :meth:`assertEqual` does. It must raise
:data:`self.failureException(msg) <failureException>` when inequality
between the first two parameters is detected -- possibly providing useful
information and explaining the inequalities in details in the error
message.
.. versionadded:: 2.7
The list of type-specific methods automatically used by
:meth:`~TestCase.assertEqual` are summarized in the following table. Note
that it's usually not necessary to invoke these methods directly.
+-----------------------------------------+-----------------------------+--------------+
| Method | Used to compare | New in |
+=========================================+=============================+==============+
| :meth:`assertMultiLineEqual(a, b) | strings | 2.7 |
| <TestCase.assertMultiLineEqual>` | | |
+-----------------------------------------+-----------------------------+--------------+
| :meth:`assertSequenceEqual(a, b) | sequences | 2.7 |
| <TestCase.assertSequenceEqual>` | | |
+-----------------------------------------+-----------------------------+--------------+
| :meth:`assertListEqual(a, b) | lists | 2.7 |
| <TestCase.assertListEqual>` | | |
+-----------------------------------------+-----------------------------+--------------+
| :meth:`assertTupleEqual(a, b) | tuples | 2.7 |
| <TestCase.assertTupleEqual>` | | |
+-----------------------------------------+-----------------------------+--------------+
| :meth:`assertSetEqual(a, b) | sets or frozensets | 2.7 |
| <TestCase.assertSetEqual>` | | |
+-----------------------------------------+-----------------------------+--------------+
| :meth:`assertDictEqual(a, b) | dicts | 2.7 |
| <TestCase.assertDictEqual>` | | |
+-----------------------------------------+-----------------------------+--------------+
.. method:: assertMultiLineEqual(first, second, msg=None)
Test that the multiline string *first* is equal to the string *second*.
When not equal a diff of the two strings highlighting the differences
will be included in the error message. This method is used by default
when comparing Unicode strings with :meth:`assertEqual`.
.. versionadded:: 2.7
.. method:: assertSequenceEqual(seq1, seq2, msg=None, seq_type=None)
Tests that two sequences are equal. If a *seq_type* is supplied, both
*seq1* and *seq2* must be instances of *seq_type* or a failure will
be raised. If the sequences are different an error message is
constructed that shows the difference between the two.
This method is not called directly by :meth:`assertEqual`, but
it's used to implement :meth:`assertListEqual` and
:meth:`assertTupleEqual`.
.. versionadded:: 2.7
.. method:: assertListEqual(list1, list2, msg=None)
assertTupleEqual(tuple1, tuple2, msg=None)
Tests that two lists or tuples are equal. If not, an error message is
constructed that shows only the differences between the two. An error
is also raised if either of the parameters are of the wrong type.
These methods are used by default when comparing lists or tuples with
:meth:`assertEqual`.
.. versionadded:: 2.7
.. method:: assertSetEqual(set1, set2, msg=None)
Tests that two sets are equal. If not, an error message is constructed
that lists the differences between the sets. This method is used by
default when comparing sets or frozensets with :meth:`assertEqual`.
Fails if either of *set1* or *set2* does not have a :meth:`set.difference`
method.
.. versionadded:: 2.7
.. method:: assertDictEqual(expected, actual, msg=None)
Test that two dictionaries are equal. If not, an error message is
constructed that shows the differences in the dictionaries. This
method will be used by default to compare dictionaries in
calls to :meth:`assertEqual`.
.. versionadded:: 2.7
.. _other-methods-and-attrs:
Finally the :class:`TestCase` provides the following methods and attributes:
.. method:: fail(msg=None)
Signals a test failure unconditionally, with *msg* or ``None`` for
the error message.
.. attribute:: failureException
This class attribute gives the exception raised by the test method. If a
test framework needs to use a specialized exception, possibly to carry
additional information, it must subclass this exception in order to "play
fair" with the framework. The initial value of this attribute is
:exc:`AssertionError`.
.. attribute:: longMessage
If set to ``True`` then any explicit failure message you pass in to the
:ref:`assert methods <assert-methods>` will be appended to the end of the
normal failure message. The normal messages contain useful information
about the objects involved, for example the message from assertEqual
shows you the repr of the two unequal objects. Setting this attribute
to ``True`` allows you to have a custom error message in addition to the
normal one.
This attribute defaults to ``False``, meaning that a custom message passed
to an assert method will silence the normal message.
The class setting can be overridden in individual tests by assigning an
instance attribute to ``True`` or ``False`` before calling the assert methods.
.. versionadded:: 2.7
.. attribute:: maxDiff
This attribute controls the maximum length of diffs output by assert
methods that report diffs on failure. It defaults to 80*8 characters.
Assert methods affected by this attribute are
:meth:`assertSequenceEqual` (including all the sequence comparison
methods that delegate to it), :meth:`assertDictEqual` and
:meth:`assertMultiLineEqual`.
Setting ``maxDiff`` to ``None`` means that there is no maximum length of
diffs.
.. versionadded:: 2.7
Testing frameworks can use the following methods to collect information on
the test:
.. method:: countTestCases()
Return the number of tests represented by this test object. For
:class:`TestCase` instances, this will always be ``1``.
.. method:: defaultTestResult()
Return an instance of the test result class that should be used for this
test case class (if no other result instance is provided to the
:meth:`run` method).
For :class:`TestCase` instances, this will always be an instance of
:class:`TestResult`; subclasses of :class:`TestCase` should override this
as necessary.
.. method:: id()
Return a string identifying the specific test case. This is usually the
full name of the test method, including the module and class name.
.. method:: shortDescription()
Returns a description of the test, or ``None`` if no description
has been provided. The default implementation of this method
returns the first line of the test method's docstring, if available,
or :const:`None`.
.. method:: addCleanup(function, *args, **kwargs)
Add a function to be called after :meth:`tearDown` to cleanup resources
used during the test. Functions will be called in reverse order to the
order they are added (LIFO). They are called with any arguments and
keyword arguments passed into :meth:`addCleanup` when they are
added.
If :meth:`setUp` fails, meaning that :meth:`tearDown` is not called,
then any cleanup functions added will still be called.
.. versionadded:: 2.7
.. method:: doCleanups()
This method is called unconditionally after :meth:`tearDown`, or
after :meth:`setUp` if :meth:`setUp` raises an exception.
It is responsible for calling all the cleanup functions added by
:meth:`addCleanup`. If you need cleanup functions to be called
*prior* to :meth:`tearDown` then you can call :meth:`doCleanups`
yourself.
:meth:`doCleanups` pops methods off the stack of cleanup
functions one at a time, so it can be called at any time.
.. versionadded:: 2.7
.. class:: FunctionTestCase(testFunc, setUp=None, tearDown=None, description=None)
This class implements the portion of the :class:`TestCase` interface which
allows the test runner to drive the test, but does not provide the methods
which test code can use to check and report errors. This is used to create
test cases using legacy test code, allowing it to be integrated into a
:mod:`unittest`-based test framework.
Deprecated aliases
##################
For historical reasons, some of the :class:`TestCase` methods had one or more
aliases that are now deprecated. The following table lists the correct names
along with their deprecated aliases:
============================== ===============================
Method Name Deprecated alias(es)
============================== ===============================
:meth:`.assertEqual` failUnlessEqual, assertEquals
:meth:`.assertNotEqual` failIfEqual
:meth:`.assertTrue` failUnless, assert\_
:meth:`.assertFalse` failIf
:meth:`.assertRaises` failUnlessRaises
:meth:`.assertAlmostEqual` failUnlessAlmostEqual
:meth:`.assertNotAlmostEqual` failIfAlmostEqual
============================== ===============================
.. deprecated:: 2.7
the aliases listed in the second column
.. _testsuite-objects:
Grouping tests
~~~~~~~~~~~~~~
.. class:: TestSuite(tests=())
This class represents an aggregation of individual test cases and test suites.
The class presents the interface needed by the test runner to allow it to be run
as any other test case. Running a :class:`TestSuite` instance is the same as
iterating over the suite, running each test individually.
If *tests* is given, it must be an iterable of individual test cases or other
test suites that will be used to build the suite initially. Additional methods
are provided to add test cases and suites to the collection later on.
:class:`TestSuite` objects behave much like :class:`TestCase` objects, except
they do not actually implement a test. Instead, they are used to aggregate
tests into groups of tests that should be run together. Some additional
methods are available to add tests to :class:`TestSuite` instances:
.. method:: TestSuite.addTest(test)
Add a :class:`TestCase` or :class:`TestSuite` to the suite.
.. method:: TestSuite.addTests(tests)
Add all the tests from an iterable of :class:`TestCase` and :class:`TestSuite`
instances to this test suite.
This is equivalent to iterating over *tests*, calling :meth:`addTest` for
each element.
:class:`TestSuite` shares the following methods with :class:`TestCase`:
.. method:: run(result)
Run the tests associated with this suite, collecting the result into the
test result object passed as *result*. Note that unlike
:meth:`TestCase.run`, :meth:`TestSuite.run` requires the result object to
be passed in.
.. method:: debug()
Run the tests associated with this suite without collecting the
result. This allows exceptions raised by the test to be propagated to the
caller and can be used to support running tests under a debugger.
.. method:: countTestCases()
Return the number of tests represented by this test object, including all
individual tests and sub-suites.
.. method:: __iter__()
Tests grouped by a :class:`TestSuite` are always accessed by iteration.
Subclasses can lazily provide tests by overriding :meth:`__iter__`. Note
that this method maybe called several times on a single suite
(for example when counting tests or comparing for equality)
so the tests returned must be the same for repeated iterations.
.. versionchanged:: 2.7
In earlier versions the :class:`TestSuite` accessed tests directly rather
than through iteration, so overriding :meth:`__iter__` wasn't sufficient
for providing tests.
In the typical usage of a :class:`TestSuite` object, the :meth:`run` method
is invoked by a :class:`TestRunner` rather than by the end-user test harness.
Loading and running tests
~~~~~~~~~~~~~~~~~~~~~~~~~
.. class:: TestLoader()
The :class:`TestLoader` class is used to create test suites from classes and
modules. Normally, there is no need to create an instance of this class; the
:mod:`unittest` module provides an instance that can be shared as
:data:`unittest.defaultTestLoader`. Using a subclass or instance, however,
allows customization of some configurable properties.
:class:`TestLoader` objects have the following methods:
.. method:: loadTestsFromTestCase(testCaseClass)
Return a suite of all test cases contained in the :class:`TestCase`\ -derived
:class:`testCaseClass`.
.. method:: loadTestsFromModule(module)
Return a suite of all test cases contained in the given module. This
method searches *module* for classes derived from :class:`TestCase` and
creates an instance of the class for each test method defined for the
class.
.. note::
While using a hierarchy of :class:`TestCase`\ -derived classes can be
convenient in sharing fixtures and helper functions, defining test
methods on base classes that are not intended to be instantiated
directly does not play well with this method. Doing so, however, can
be useful when the fixtures are different and defined in subclasses.
If a module provides a ``load_tests`` function it will be called to
load the tests. This allows modules to customize test loading.
This is the `load_tests protocol`_.
.. versionchanged:: 2.7
Support for ``load_tests`` added.
.. method:: loadTestsFromName(name, module=None)
Return a suite of all test cases given a string specifier.
The specifier *name* is a "dotted name" that may resolve either to a
module, a test case class, a test method within a test case class, a
:class:`TestSuite` instance, or a callable object which returns a
:class:`TestCase` or :class:`TestSuite` instance. These checks are
applied in the order listed here; that is, a method on a possible test
case class will be picked up as "a test method within a test case class",
rather than "a callable object".
For example, if you have a module :mod:`SampleTests` containing a
:class:`TestCase`\ -derived class :class:`SampleTestCase` with three test
methods (:meth:`test_one`, :meth:`test_two`, and :meth:`test_three`), the
specifier ``'SampleTests.SampleTestCase'`` would cause this method to
return a suite which will run all three test methods. Using the specifier
``'SampleTests.SampleTestCase.test_two'`` would cause it to return a test
suite which will run only the :meth:`test_two` test method. The specifier
can refer to modules and packages which have not been imported; they will
be imported as a side-effect.
The method optionally resolves *name* relative to the given *module*.
.. method:: loadTestsFromNames(names, module=None)
Similar to :meth:`loadTestsFromName`, but takes a sequence of names rather
than a single name. The return value is a test suite which supports all
the tests defined for each name.
.. method:: getTestCaseNames(testCaseClass)
Return a sorted sequence of method names found within *testCaseClass*;
this should be a subclass of :class:`TestCase`.
.. method:: discover(start_dir, pattern='test*.py', top_level_dir=None)
Find all the test modules by recursing into subdirectories from the
specified start directory, and return a TestSuite object containing them.
Only test files that match *pattern* will be loaded. (Using shell style
pattern matching.) Only module names that are importable (i.e. are valid
Python identifiers) will be loaded.
All test modules must be importable from the top level of the project. If
the start directory is not the top level directory then the top level
directory must be specified separately.
If importing a module fails, for example due to a syntax error, then this
will be recorded as a single error and discovery will continue.
If a test package name (directory with :file:`__init__.py`) matches the
pattern then the package will be checked for a ``load_tests``
function. If this exists then it will be called with *loader*, *tests*,
*pattern*.
If load_tests exists then discovery does *not* recurse into the package,
``load_tests`` is responsible for loading all tests in the package.
The pattern is deliberately not stored as a loader attribute so that
packages can continue discovery themselves. *top_level_dir* is stored so
``load_tests`` does not need to pass this argument in to
``loader.discover()``.
*start_dir* can be a dotted module name as well as a directory.
.. versionadded:: 2.7
The following attributes of a :class:`TestLoader` can be configured either by
subclassing or assignment on an instance:
.. attribute:: testMethodPrefix
String giving the prefix of method names which will be interpreted as test
methods. The default value is ``'test'``.
This affects :meth:`getTestCaseNames` and all the :meth:`loadTestsFrom\*`
methods.
.. attribute:: sortTestMethodsUsing
Function to be used to compare method names when sorting them in
:meth:`getTestCaseNames` and all the :meth:`loadTestsFrom\*` methods. The
default value is the built-in :func:`cmp` function; the attribute can also
be set to :const:`None` to disable the sort.
.. attribute:: suiteClass
Callable object that constructs a test suite from a list of tests. No
methods on the resulting object are needed. The default value is the
:class:`TestSuite` class.
This affects all the :meth:`loadTestsFrom\*` methods.
.. class:: TestResult
This class is used to compile information about which tests have succeeded
and which have failed.
A :class:`TestResult` object stores the results of a set of tests. The
:class:`TestCase` and :class:`TestSuite` classes ensure that results are
properly recorded; test authors do not need to worry about recording the
outcome of tests.
Testing frameworks built on top of :mod:`unittest` may want access to the
:class:`TestResult` object generated by running a set of tests for reporting
purposes; a :class:`TestResult` instance is returned by the
:meth:`TestRunner.run` method for this purpose.
:class:`TestResult` instances have the following attributes that will be of
interest when inspecting the results of running a set of tests:
.. attribute:: errors
A list containing 2-tuples of :class:`TestCase` instances and strings
holding formatted tracebacks. Each tuple represents a test which raised an
unexpected exception.
.. versionchanged:: 2.2
Contains formatted tracebacks instead of :func:`sys.exc_info` results.
.. attribute:: failures
A list containing 2-tuples of :class:`TestCase` instances and strings
holding formatted tracebacks. Each tuple represents a test where a failure
was explicitly signalled using the :meth:`TestCase.assert\*` methods.
.. versionchanged:: 2.2
Contains formatted tracebacks instead of :func:`sys.exc_info` results.
.. attribute:: skipped
A list containing 2-tuples of :class:`TestCase` instances and strings
holding the reason for skipping the test.
.. versionadded:: 2.7
.. attribute:: expectedFailures
A list containing 2-tuples of :class:`TestCase` instances and strings
holding formatted tracebacks. Each tuple represents an expected failure
of the test case.
.. attribute:: unexpectedSuccesses
A list containing :class:`TestCase` instances that were marked as expected
failures, but succeeded.
.. attribute:: shouldStop
Set to ``True`` when the execution of tests should stop by :meth:`stop`.
.. attribute:: testsRun
The total number of tests run so far.
.. attribute:: buffer
If set to true, ``sys.stdout`` and ``sys.stderr`` will be buffered in between
:meth:`startTest` and :meth:`stopTest` being called. Collected output will
only be echoed onto the real ``sys.stdout`` and ``sys.stderr`` if the test
fails or errors. Any output is also attached to the failure / error message.
.. versionadded:: 2.7
.. attribute:: failfast
If set to true :meth:`stop` will be called on the first failure or error,
halting the test run.
.. versionadded:: 2.7
.. method:: wasSuccessful()
Return ``True`` if all tests run so far have passed, otherwise returns
``False``.
.. method:: stop()
This method can be called to signal that the set of tests being run should
be aborted by setting the :attr:`shouldStop` attribute to ``True``.
:class:`TestRunner` objects should respect this flag and return without
running any additional tests.
For example, this feature is used by the :class:`TextTestRunner` class to
stop the test framework when the user signals an interrupt from the
keyboard. Interactive tools which provide :class:`TestRunner`
implementations can use this in a similar manner.
The following methods of the :class:`TestResult` class are used to maintain
the internal data structures, and may be extended in subclasses to support
additional reporting requirements. This is particularly useful in building
tools which support interactive reporting while tests are being run.
.. method:: startTest(test)
Called when the test case *test* is about to be run.
.. method:: stopTest(test)
Called after the test case *test* has been executed, regardless of the
outcome.
.. method:: startTestRun()
Called once before any tests are executed.
.. versionadded:: 2.7
.. method:: stopTestRun()
Called once after all tests are executed.
.. versionadded:: 2.7
.. method:: addError(test, err)
Called when the test case *test* raises an unexpected exception. *err* is a
tuple of the form returned by :func:`sys.exc_info`: ``(type, value,
traceback)``.
The default implementation appends a tuple ``(test, formatted_err)`` to
the instance's :attr:`errors` attribute, where *formatted_err* is a
formatted traceback derived from *err*.
.. method:: addFailure(test, err)
Called when the test case *test* signals a failure. *err* is a tuple of
the form returned by :func:`sys.exc_info`: ``(type, value, traceback)``.
The default implementation appends a tuple ``(test, formatted_err)`` to
the instance's :attr:`failures` attribute, where *formatted_err* is a
formatted traceback derived from *err*.
.. method:: addSuccess(test)
Called when the test case *test* succeeds.
The default implementation does nothing.
.. method:: addSkip(test, reason)
Called when the test case *test* is skipped. *reason* is the reason the
test gave for skipping.
The default implementation appends a tuple ``(test, reason)`` to the
instance's :attr:`skipped` attribute.
.. method:: addExpectedFailure(test, err)
Called when the test case *test* fails, but was marked with the
:func:`expectedFailure` decorator.
The default implementation appends a tuple ``(test, formatted_err)`` to
the instance's :attr:`expectedFailures` attribute, where *formatted_err*
is a formatted traceback derived from *err*.
.. method:: addUnexpectedSuccess(test)
Called when the test case *test* was marked with the
:func:`expectedFailure` decorator, but succeeded.
The default implementation appends the test to the instance's
:attr:`unexpectedSuccesses` attribute.
.. class:: TextTestResult(stream, descriptions, verbosity)
A concrete implementation of :class:`TestResult` used by the
:class:`TextTestRunner`.
.. versionadded:: 2.7
This class was previously named ``_TextTestResult``. The old name still
exists as an alias but is deprecated.
.. data:: defaultTestLoader
Instance of the :class:`TestLoader` class intended to be shared. If no
customization of the :class:`TestLoader` is needed, this instance can be used
instead of repeatedly creating new instances.
.. class:: TextTestRunner(stream=sys.stderr, descriptions=True, verbosity=1, \
failfast=False, buffer=False, resultclass=None)
A basic test runner implementation which prints results on standard error. It
has a few configurable parameters, but is essentially very simple. Graphical
applications which run test suites should provide alternate implementations.
.. method:: _makeResult()
This method returns the instance of ``TestResult`` used by :meth:`run`.
It is not intended to be called directly, but can be overridden in
subclasses to provide a custom ``TestResult``.
``_makeResult()`` instantiates the class or callable passed in the
``TextTestRunner`` constructor as the ``resultclass`` argument. It
defaults to :class:`TextTestResult` if no ``resultclass`` is provided.
The result class is instantiated with the following arguments::
stream, descriptions, verbosity
.. function:: main([module[, defaultTest[, argv[, testRunner[, testLoader[, exit[, verbosity[, failfast[, catchbreak[, buffer]]]]]]]]]])
A command-line program that loads a set of tests from *module* and runs them;
this is primarily for making test modules conveniently executable.
The simplest use for this function is to include the following line at the
end of a test script::
if __name__ == '__main__':
unittest.main()
You can run tests with more detailed information by passing in the verbosity
argument::
if __name__ == '__main__':
unittest.main(verbosity=2)
The *defaultTest* argument is the name of the test to run if no test names
are specified via *argv*. If not specified or ``None`` and no test names are
provided via *argv*, all tests found in *module* are run.
The *argv* argument can be a list of options passed to the program, with the
first element being the program name. If not specified or ``None``,
the values of :data:`sys.argv` are used.
The *testRunner* argument can either be a test runner class or an already
created instance of it. By default ``main`` calls :func:`sys.exit` with
an exit code indicating success or failure of the tests run.
The *testLoader* argument has to be a :class:`TestLoader` instance,
and defaults to :data:`defaultTestLoader`.
``main`` supports being used from the interactive interpreter by passing in the
argument ``exit=False``. This displays the result on standard output without
calling :func:`sys.exit`::
>>> from unittest import main
>>> main(module='test_module', exit=False)
The *failfast*, *catchbreak* and *buffer* parameters have the same
effect as the same-name `command-line options`_.
Calling ``main`` actually returns an instance of the ``TestProgram`` class.
This stores the result of the tests run as the ``result`` attribute.
.. versionchanged:: 2.7
The *exit*, *verbosity*, *failfast*, *catchbreak* and *buffer*
parameters were added.
load_tests Protocol
###################
.. versionadded:: 2.7
Modules or packages can customize how tests are loaded from them during normal
test runs or test discovery by implementing a function called ``load_tests``.
If a test module defines ``load_tests`` it will be called by
:meth:`TestLoader.loadTestsFromModule` with the following arguments::
load_tests(loader, standard_tests, None)
It should return a :class:`TestSuite`.
*loader* is the instance of :class:`TestLoader` doing the loading.
*standard_tests* are the tests that would be loaded by default from the
module. It is common for test modules to only want to add or remove tests
from the standard set of tests.
The third argument is used when loading packages as part of test discovery.
A typical ``load_tests`` function that loads tests from a specific set of
:class:`TestCase` classes may look like::
test_cases = (TestCase1, TestCase2, TestCase3)
def load_tests(loader, tests, pattern):
suite = TestSuite()
for test_class in test_cases:
tests = loader.loadTestsFromTestCase(test_class)
suite.addTests(tests)
return suite
If discovery is started, either from the command line or by calling
:meth:`TestLoader.discover`, with a pattern that matches a package
name then the package :file:`__init__.py` will be checked for ``load_tests``.
.. note::
The default pattern is ``'test*.py'``. This matches all Python files
that start with ``'test'`` but *won't* match any test directories.
A pattern like ``'test*'`` will match test packages as well as
modules.
If the package :file:`__init__.py` defines ``load_tests`` then it will be
called and discovery not continued into the package. ``load_tests``
is called with the following arguments::
load_tests(loader, standard_tests, pattern)
This should return a :class:`TestSuite` representing all the tests
from the package. (``standard_tests`` will only contain tests
collected from :file:`__init__.py`.)
Because the pattern is passed into ``load_tests`` the package is free to
continue (and potentially modify) test discovery. A 'do nothing'
``load_tests`` function for a test package would look like::
def load_tests(loader, standard_tests, pattern):
# top level directory cached on loader instance
this_dir = os.path.dirname(__file__)
package_tests = loader.discover(start_dir=this_dir, pattern=pattern)
standard_tests.addTests(package_tests)
return standard_tests
Class and Module Fixtures
-------------------------
Class and module level fixtures are implemented in :class:`TestSuite`. When
the test suite encounters a test from a new class then :meth:`tearDownClass`
from the previous class (if there is one) is called, followed by
:meth:`setUpClass` from the new class.
Similarly if a test is from a different module from the previous test then
``tearDownModule`` from the previous module is run, followed by
``setUpModule`` from the new module.
After all the tests have run the final ``tearDownClass`` and
``tearDownModule`` are run.
Note that shared fixtures do not play well with [potential] features like test
parallelization and they break test isolation. They should be used with care.
The default ordering of tests created by the unittest test loaders is to group
all tests from the same modules and classes together. This will lead to
``setUpClass`` / ``setUpModule`` (etc) being called exactly once per class and
module. If you randomize the order, so that tests from different modules and
classes are adjacent to each other, then these shared fixture functions may be
called multiple times in a single test run.
Shared fixtures are not intended to work with suites with non-standard
ordering. A ``BaseTestSuite`` still exists for frameworks that don't want to
support shared fixtures.
If there are any exceptions raised during one of the shared fixture functions
the test is reported as an error. Because there is no corresponding test
instance an ``_ErrorHolder`` object (that has the same interface as a
:class:`TestCase`) is created to represent the error. If you are just using
the standard unittest test runner then this detail doesn't matter, but if you
are a framework author it may be relevant.
setUpClass and tearDownClass
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
These must be implemented as class methods::
import unittest
class Test(unittest.TestCase):
@classmethod
def setUpClass(cls):
cls._connection = createExpensiveConnectionObject()
@classmethod
def tearDownClass(cls):
cls._connection.destroy()
If you want the ``setUpClass`` and ``tearDownClass`` on base classes called
then you must call up to them yourself. The implementations in
:class:`TestCase` are empty.
If an exception is raised during a ``setUpClass`` then the tests in the class
are not run and the ``tearDownClass`` is not run. Skipped classes will not
have ``setUpClass`` or ``tearDownClass`` run. If the exception is a
:exc:`SkipTest` exception then the class will be reported as having been skipped
instead of as an error.
setUpModule and tearDownModule
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
These should be implemented as functions::
def setUpModule():
createConnection()
def tearDownModule():
closeConnection()
If an exception is raised in a ``setUpModule`` then none of the tests in the
module will be run and the ``tearDownModule`` will not be run. If the exception is a
:exc:`SkipTest` exception then the module will be reported as having been skipped
instead of as an error.
Signal Handling
---------------
The :option:`-c/--catch <unittest -c>` command-line option to unittest,
along with the ``catchbreak`` parameter to :func:`unittest.main()`, provide
more friendly handling of control-C during a test run. With catch break
behavior enabled control-C will allow the currently running test to complete,
and the test run will then end and report all the results so far. A second
control-c will raise a :exc:`KeyboardInterrupt` in the usual way.
The control-c handling signal handler attempts to remain compatible with code or
tests that install their own :const:`signal.SIGINT` handler. If the ``unittest``
handler is called but *isn't* the installed :const:`signal.SIGINT` handler,
i.e. it has been replaced by the system under test and delegated to, then it
calls the default handler. This will normally be the expected behavior by code
that replaces an installed handler and delegates to it. For individual tests
that need ``unittest`` control-c handling disabled the :func:`removeHandler`
decorator can be used.
There are a few utility functions for framework authors to enable control-c
handling functionality within test frameworks.
.. function:: installHandler()
Install the control-c handler. When a :const:`signal.SIGINT` is received
(usually in response to the user pressing control-c) all registered results
have :meth:`~TestResult.stop` called.
.. versionadded:: 2.7
.. function:: registerResult(result)
Register a :class:`TestResult` object for control-c handling. Registering a
result stores a weak reference to it, so it doesn't prevent the result from
being garbage collected.
Registering a :class:`TestResult` object has no side-effects if control-c
handling is not enabled, so test frameworks can unconditionally register
all results they create independently of whether or not handling is enabled.
.. versionadded:: 2.7
.. function:: removeResult(result)
Remove a registered result. Once a result has been removed then
:meth:`~TestResult.stop` will no longer be called on that result object in
response to a control-c.
.. versionadded:: 2.7
.. function:: removeHandler(function=None)
When called without arguments this function removes the control-c handler
if it has been installed. This function can also be used as a test decorator
to temporarily remove the handler while the test is being executed::
@unittest.removeHandler
def test_signal_handling(self):
...
.. versionadded:: 2.7