:keepdoctest:
:mod:`doctest` --- Test interactive Python examples
===================================================
.. module:: doctest
:synopsis: Test pieces of code within docstrings.
.. moduleauthor:: Tim Peters <tim@python.org>
.. sectionauthor:: Tim Peters <tim@python.org>
.. sectionauthor:: Moshe Zadka <moshez@debian.org>
.. sectionauthor:: Edward Loper <edloper@users.sourceforge.net>
The :mod:`doctest` module searches for pieces of text that look like interactive
Python sessions, and then executes those sessions to verify that they work
exactly as shown. There are several common ways to use doctest:
* To check that a module's docstrings are up-to-date by verifying that all
interactive examples still work as documented.
* To perform regression testing by verifying that interactive examples from a
test file or a test object work as expected.
* To write tutorial documentation for a package, liberally illustrated with
input-output examples. Depending on whether the examples or the expository text
are emphasized, this has the flavor of "literate testing" or "executable
documentation".
Here's a complete but small example module::
"""
This is the "example" module.
The example module supplies one function, factorial(). For example,
>>> factorial(5)
120
"""
def factorial(n):
"""Return the factorial of n, an exact integer >= 0.
If the result is small enough to fit in an int, return an int.
Else return a long.
>>> [factorial(n) for n in range(6)]
[1, 1, 2, 6, 24, 120]
>>> [factorial(long(n)) for n in range(6)]
[1, 1, 2, 6, 24, 120]
>>> factorial(30)
265252859812191058636308480000000L
>>> factorial(30L)
265252859812191058636308480000000L
>>> factorial(-1)
Traceback (most recent call last):
...
ValueError: n must be >= 0
Factorials of floats are OK, but the float must be an exact integer:
>>> factorial(30.1)
Traceback (most recent call last):
...
ValueError: n must be exact integer
>>> factorial(30.0)
265252859812191058636308480000000L
It must also not be ridiculously large:
>>> factorial(1e100)
Traceback (most recent call last):
...
OverflowError: n too large
"""
import math
if not n >= 0:
raise ValueError("n must be >= 0")
if math.floor(n) != n:
raise ValueError("n must be exact integer")
if n+1 == n: # catch a value like 1e300
raise OverflowError("n too large")
result = 1
factor = 2
while factor <= n:
result *= factor
factor += 1
return result
if __name__ == "__main__":
import doctest
doctest.testmod()
If you run :file:`example.py` directly from the command line, :mod:`doctest`
works its magic:
.. code-block:: shell-session
$ python example.py
$
There's no output! That's normal, and it means all the examples worked. Pass
``-v`` to the script, and :mod:`doctest` prints a detailed log of what
it's trying, and prints a summary at the end:
.. code-block:: shell-session
$ python example.py -v
Trying:
factorial(5)
Expecting:
120
ok
Trying:
[factorial(n) for n in range(6)]
Expecting:
[1, 1, 2, 6, 24, 120]
ok
Trying:
[factorial(long(n)) for n in range(6)]
Expecting:
[1, 1, 2, 6, 24, 120]
ok
And so on, eventually ending with:
.. code-block:: none
Trying:
factorial(1e100)
Expecting:
Traceback (most recent call last):
...
OverflowError: n too large
ok
2 items passed all tests:
1 tests in __main__
8 tests in __main__.factorial
9 tests in 2 items.
9 passed and 0 failed.
Test passed.
$
That's all you need to know to start making productive use of :mod:`doctest`!
Jump in. The following sections provide full details. Note that there are many
examples of doctests in the standard Python test suite and libraries.
Especially useful examples can be found in the standard test file
:file:`Lib/test/test_doctest.py`.
.. _doctest-simple-testmod:
Simple Usage: Checking Examples in Docstrings
---------------------------------------------
The simplest way to start using doctest (but not necessarily the way you'll
continue to do it) is to end each module :mod:`M` with::
if __name__ == "__main__":
import doctest
doctest.testmod()
:mod:`doctest` then examines docstrings in module :mod:`M`.
Running the module as a script causes the examples in the docstrings to get
executed and verified::
python M.py
This won't display anything unless an example fails, in which case the failing
example(s) and the cause(s) of the failure(s) are printed to stdout, and the
final line of output is ``***Test Failed*** N failures.``, where *N* is the
number of examples that failed.
Run it with the ``-v`` switch instead::
python M.py -v
and a detailed report of all examples tried is printed to standard output, along
with assorted summaries at the end.
You can force verbose mode by passing ``verbose=True`` to :func:`testmod`, or
prohibit it by passing ``verbose=False``. In either of those cases,
``sys.argv`` is not examined by :func:`testmod` (so passing ``-v`` or not
has no effect).
Since Python 2.6, there is also a command line shortcut for running
:func:`testmod`. You can instruct the Python interpreter to run the doctest
module directly from the standard library and pass the module name(s) on the
command line::
python -m doctest -v example.py
This will import :file:`example.py` as a standalone module and run
:func:`testmod` on it. Note that this may not work correctly if the file is
part of a package and imports other submodules from that package.
For more information on :func:`testmod`, see section :ref:`doctest-basic-api`.
.. _doctest-simple-testfile:
Simple Usage: Checking Examples in a Text File
----------------------------------------------
Another simple application of doctest is testing interactive examples in a text
file. This can be done with the :func:`testfile` function::
import doctest
doctest.testfile("example.txt")
That short script executes and verifies any interactive Python examples
contained in the file :file:`example.txt`. The file content is treated as if it
were a single giant docstring; the file doesn't need to contain a Python
program! For example, perhaps :file:`example.txt` contains this:
.. code-block:: none
The ``example`` module
======================
Using ``factorial``
-------------------
This is an example text file in reStructuredText format. First import
``factorial`` from the ``example`` module:
>>> from example import factorial
Now use it:
>>> factorial(6)
120
Running ``doctest.testfile("example.txt")`` then finds the error in this
documentation::
File "./example.txt", line 14, in example.txt
Failed example:
factorial(6)
Expected:
120
Got:
720
As with :func:`testmod`, :func:`testfile` won't display anything unless an
example fails. If an example does fail, then the failing example(s) and the
cause(s) of the failure(s) are printed to stdout, using the same format as
:func:`testmod`.
By default, :func:`testfile` looks for files in the calling module's directory.
See section :ref:`doctest-basic-api` for a description of the optional arguments
that can be used to tell it to look for files in other locations.
Like :func:`testmod`, :func:`testfile`'s verbosity can be set with the
``-v`` command-line switch or with the optional keyword argument
*verbose*.
Since Python 2.6, there is also a command line shortcut for running
:func:`testfile`. You can instruct the Python interpreter to run the doctest
module directly from the standard library and pass the file name(s) on the
command line::
python -m doctest -v example.txt
Because the file name does not end with :file:`.py`, :mod:`doctest` infers that
it must be run with :func:`testfile`, not :func:`testmod`.
For more information on :func:`testfile`, see section :ref:`doctest-basic-api`.
.. _doctest-how-it-works:
How It Works
------------
This section examines in detail how doctest works: which docstrings it looks at,
how it finds interactive examples, what execution context it uses, how it
handles exceptions, and how option flags can be used to control its behavior.
This is the information that you need to know to write doctest examples; for
information about actually running doctest on these examples, see the following
sections.
.. _doctest-which-docstrings:
Which Docstrings Are Examined?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The module docstring, and all function, class and method docstrings are
searched. Objects imported into the module are not searched.
In addition, if ``M.__test__`` exists and "is true", it must be a dict, and each
entry maps a (string) name to a function object, class object, or string.
Function and class object docstrings found from ``M.__test__`` are searched, and
strings are treated as if they were docstrings. In output, a key ``K`` in
``M.__test__`` appears with name ::
<name of M>.__test__.K
Any classes found are recursively searched similarly, to test docstrings in
their contained methods and nested classes.
.. versionchanged:: 2.4
A "private name" concept is deprecated and no longer documented.
.. _doctest-finding-examples:
How are Docstring Examples Recognized?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
In most cases a copy-and-paste of an interactive console session works fine,
but doctest isn't trying to do an exact emulation of any specific Python shell.
::
>>> # comments are ignored
>>> x = 12
>>> x
12
>>> if x == 13:
... print "yes"
... else:
... print "no"
... print "NO"
... print "NO!!!"
...
no
NO
NO!!!
>>>
Any expected output must immediately follow the final ``'>>> '`` or ``'... '``
line containing the code, and the expected output (if any) extends to the next
``'>>> '`` or all-whitespace line.
The fine print:
* Expected output cannot contain an all-whitespace line, since such a line is
taken to signal the end of expected output. If expected output does contain a
blank line, put ``<BLANKLINE>`` in your doctest example each place a blank line
is expected.
.. versionadded:: 2.4
``<BLANKLINE>`` was added; there was no way to use expected output containing
empty lines in previous versions.
* All hard tab characters are expanded to spaces, using 8-column tab stops.
Tabs in output generated by the tested code are not modified. Because any
hard tabs in the sample output *are* expanded, this means that if the code
output includes hard tabs, the only way the doctest can pass is if the
:const:`NORMALIZE_WHITESPACE` option or :ref:`directive <doctest-directives>`
is in effect.
Alternatively, the test can be rewritten to capture the output and compare it
to an expected value as part of the test. This handling of tabs in the
source was arrived at through trial and error, and has proven to be the least
error prone way of handling them. It is possible to use a different
algorithm for handling tabs by writing a custom :class:`DocTestParser` class.
.. versionchanged:: 2.4
Expanding tabs to spaces is new; previous versions tried to preserve hard tabs,
with confusing results.
* Output to stdout is captured, but not output to stderr (exception tracebacks
are captured via a different means).
* If you continue a line via backslashing in an interactive session, or for any
other reason use a backslash, you should use a raw docstring, which will
preserve your backslashes exactly as you type them::
>>> def f(x):
... r'''Backslashes in a raw docstring: m\n'''
>>> print f.__doc__
Backslashes in a raw docstring: m\n
Otherwise, the backslash will be interpreted as part of the string. For example,
the ``\n`` above would be interpreted as a newline character. Alternatively, you
can double each backslash in the doctest version (and not use a raw string)::
>>> def f(x):
... '''Backslashes in a raw docstring: m\\n'''
>>> print f.__doc__
Backslashes in a raw docstring: m\n
* The starting column doesn't matter::
>>> assert "Easy!"
>>> import math
>>> math.floor(1.9)
1.0
and as many leading whitespace characters are stripped from the expected output
as appeared in the initial ``'>>> '`` line that started the example.
.. _doctest-execution-context:
What's the Execution Context?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
By default, each time :mod:`doctest` finds a docstring to test, it uses a
*shallow copy* of :mod:`M`'s globals, so that running tests doesn't change the
module's real globals, and so that one test in :mod:`M` can't leave behind
crumbs that accidentally allow another test to work. This means examples can
freely use any names defined at top-level in :mod:`M`, and names defined earlier
in the docstring being run. Examples cannot see names defined in other
docstrings.
You can force use of your own dict as the execution context by passing
``globs=your_dict`` to :func:`testmod` or :func:`testfile` instead.
.. _doctest-exceptions:
What About Exceptions?
^^^^^^^^^^^^^^^^^^^^^^
No problem, provided that the traceback is the only output produced by the
example: just paste in the traceback. [#]_ Since tracebacks contain details
that are likely to change rapidly (for example, exact file paths and line
numbers), this is one case where doctest works hard to be flexible in what it
accepts.
Simple example::
>>> [1, 2, 3].remove(42)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: list.remove(x): x not in list
That doctest succeeds if :exc:`ValueError` is raised, with the ``list.remove(x):
x not in list`` detail as shown.
The expected output for an exception must start with a traceback header, which
may be either of the following two lines, indented the same as the first line of
the example::
Traceback (most recent call last):
Traceback (innermost last):
The traceback header is followed by an optional traceback stack, whose contents
are ignored by doctest. The traceback stack is typically omitted, or copied
verbatim from an interactive session.
The traceback stack is followed by the most interesting part: the line(s)
containing the exception type and detail. This is usually the last line of a
traceback, but can extend across multiple lines if the exception has a
multi-line detail::
>>> raise ValueError('multi\n line\ndetail')
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: multi
line
detail
The last three lines (starting with :exc:`ValueError`) are compared against the
exception's type and detail, and the rest are ignored.
.. versionchanged:: 2.4
Previous versions were unable to handle multi-line exception details.
Best practice is to omit the traceback stack, unless it adds significant
documentation value to the example. So the last example is probably better as::
>>> raise ValueError('multi\n line\ndetail')
Traceback (most recent call last):
...
ValueError: multi
line
detail
Note that tracebacks are treated very specially. In particular, in the
rewritten example, the use of ``...`` is independent of doctest's
:const:`ELLIPSIS` option. The ellipsis in that example could be left out, or
could just as well be three (or three hundred) commas or digits, or an indented
transcript of a Monty Python skit.
Some details you should read once, but won't need to remember:
* Doctest can't guess whether your expected output came from an exception
traceback or from ordinary printing. So, e.g., an example that expects
``ValueError: 42 is prime`` will pass whether :exc:`ValueError` is actually
raised or if the example merely prints that traceback text. In practice,
ordinary output rarely begins with a traceback header line, so this doesn't
create real problems.
* Each line of the traceback stack (if present) must be indented further than
the first line of the example, *or* start with a non-alphanumeric character.
The first line following the traceback header indented the same and starting
with an alphanumeric is taken to be the start of the exception detail. Of
course this does the right thing for genuine tracebacks.
* When the :const:`IGNORE_EXCEPTION_DETAIL` doctest option is specified,
everything following the leftmost colon and any module information in the
exception name is ignored.
* The interactive shell omits the traceback header line for some
:exc:`SyntaxError`\ s. But doctest uses the traceback header line to
distinguish exceptions from non-exceptions. So in the rare case where you need
to test a :exc:`SyntaxError` that omits the traceback header, you will need to
manually add the traceback header line to your test example.
* For some :exc:`SyntaxError`\ s, Python displays the character position of the
syntax error, using a ``^`` marker::
>>> 1 1
File "<stdin>", line 1
1 1
^
SyntaxError: invalid syntax
Since the lines showing the position of the error come before the exception type
and detail, they are not checked by doctest. For example, the following test
would pass, even though it puts the ``^`` marker in the wrong location::
>>> 1 1
Traceback (most recent call last):
File "<stdin>", line 1
1 1
^
SyntaxError: invalid syntax
.. _option-flags-and-directives:
.. _doctest-options:
Option Flags
^^^^^^^^^^^^
A number of option flags control various aspects of doctest's behavior.
Symbolic names for the flags are supplied as module constants, which can be
:ref:`bitwise ORed <bitwise>` together and passed to various functions.
The names can also be used in :ref:`doctest directives <doctest-directives>`.
The first group of options define test semantics, controlling aspects of how
doctest decides whether actual output matches an example's expected output:
.. data:: DONT_ACCEPT_TRUE_FOR_1
By default, if an expected output block contains just ``1``, an actual output
block containing just ``1`` or just ``True`` is considered to be a match, and
similarly for ``0`` versus ``False``. When :const:`DONT_ACCEPT_TRUE_FOR_1` is
specified, neither substitution is allowed. The default behavior caters to that
Python changed the return type of many functions from integer to boolean;
doctests expecting "little integer" output still work in these cases. This
option will probably go away, but not for several years.
.. data:: DONT_ACCEPT_BLANKLINE
By default, if an expected output block contains a line containing only the
string ``<BLANKLINE>``, then that line will match a blank line in the actual
output. Because a genuinely blank line delimits the expected output, this is
the only way to communicate that a blank line is expected. When
:const:`DONT_ACCEPT_BLANKLINE` is specified, this substitution is not allowed.
.. data:: NORMALIZE_WHITESPACE
When specified, all sequences of whitespace (blanks and newlines) are treated as
equal. Any sequence of whitespace within the expected output will match any
sequence of whitespace within the actual output. By default, whitespace must
match exactly. :const:`NORMALIZE_WHITESPACE` is especially useful when a line of
expected output is very long, and you want to wrap it across multiple lines in
your source.
.. data:: ELLIPSIS
When specified, an ellipsis marker (``...``) in the expected output can match
any substring in the actual output. This includes substrings that span line
boundaries, and empty substrings, so it's best to keep usage of this simple.
Complicated uses can lead to the same kinds of "oops, it matched too much!"
surprises that ``.*`` is prone to in regular expressions.
.. data:: IGNORE_EXCEPTION_DETAIL
When specified, an example that expects an exception passes if an exception of
the expected type is raised, even if the exception detail does not match. For
example, an example expecting ``ValueError: 42`` will pass if the actual
exception raised is ``ValueError: 3*14``, but will fail, e.g., if
:exc:`TypeError` is raised.
It will also ignore the module name used in Python 3 doctest reports. Hence
both of these variations will work with the flag specified, regardless of
whether the test is run under Python 2.7 or Python 3.2 (or later versions)::
>>> raise CustomError('message')
Traceback (most recent call last):
CustomError: message
>>> raise CustomError('message')
Traceback (most recent call last):
my_module.CustomError: message
Note that :const:`ELLIPSIS` can also be used to ignore the
details of the exception message, but such a test may still fail based
on whether or not the module details are printed as part of the
exception name. Using :const:`IGNORE_EXCEPTION_DETAIL` and the details
from Python 2.3 is also the only clear way to write a doctest that doesn't
care about the exception detail yet continues to pass under Python 2.3 or
earlier (those releases do not support :ref:`doctest directives
<doctest-directives>` and ignore them as irrelevant comments). For example::
>>> (1, 2)[3] = 'moo'
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: object doesn't support item assignment
passes under Python 2.3 and later Python versions with the flag specified,
even though the detail
changed in Python 2.4 to say "does not" instead of "doesn't".
.. versionchanged:: 2.7
:const:`IGNORE_EXCEPTION_DETAIL` now also ignores any information
relating to the module containing the exception under test
.. data:: SKIP
When specified, do not run the example at all. This can be useful in contexts
where doctest examples serve as both documentation and test cases, and an
example should be included for documentation purposes, but should not be
checked. E.g., the example's output might be random; or the example might
depend on resources which would be unavailable to the test driver.
The SKIP flag can also be used for temporarily "commenting out" examples.
.. versionadded:: 2.5
.. data:: COMPARISON_FLAGS
A bitmask or'ing together all the comparison flags above.
The second group of options controls how test failures are reported:
.. data:: REPORT_UDIFF
When specified, failures that involve multi-line expected and actual outputs are
displayed using a unified diff.
.. data:: REPORT_CDIFF
When specified, failures that involve multi-line expected and actual outputs
will be displayed using a context diff.
.. data:: REPORT_NDIFF
When specified, differences are computed by ``difflib.Differ``, using the same
algorithm as the popular :file:`ndiff.py` utility. This is the only method that
marks differences within lines as well as across lines. For example, if a line
of expected output contains digit ``1`` where actual output contains letter
``l``, a line is inserted with a caret marking the mismatching column positions.
.. data:: REPORT_ONLY_FIRST_FAILURE
When specified, display the first failing example in each doctest, but suppress
output for all remaining examples. This will prevent doctest from reporting
correct examples that break because of earlier failures; but it might also hide
incorrect examples that fail independently of the first failure. When
:const:`REPORT_ONLY_FIRST_FAILURE` is specified, the remaining examples are
still run, and still count towards the total number of failures reported; only
the output is suppressed.
.. data:: REPORTING_FLAGS
A bitmask or'ing together all the reporting flags above.
.. versionadded:: 2.4
The constants
:const:`DONT_ACCEPT_BLANKLINE`, :const:`NORMALIZE_WHITESPACE`,
:const:`ELLIPSIS`, :const:`IGNORE_EXCEPTION_DETAIL`, :const:`REPORT_UDIFF`,
:const:`REPORT_CDIFF`, :const:`REPORT_NDIFF`,
:const:`REPORT_ONLY_FIRST_FAILURE`, :const:`COMPARISON_FLAGS` and
:const:`REPORTING_FLAGS` were added.
There's also a way to register new option flag names, although this isn't useful
unless you intend to extend :mod:`doctest` internals via subclassing:
.. function:: register_optionflag(name)
Create a new option flag with a given name, and return the new flag's integer
value. :func:`register_optionflag` can be used when subclassing
:class:`OutputChecker` or :class:`DocTestRunner` to create new options that are
supported by your subclasses. :func:`register_optionflag` should always be
called using the following idiom::
MY_FLAG = register_optionflag('MY_FLAG')
.. versionadded:: 2.4
.. _doctest-directives:
Directives
^^^^^^^^^^
Doctest directives may be used to modify the :ref:`option flags
<doctest-options>` for an individual example. Doctest directives are
special Python comments following an example's source code:
.. productionlist:: doctest
directive: "#" "doctest:" `directive_options`
directive_options: `directive_option` ("," `directive_option`)\*
directive_option: `on_or_off` `directive_option_name`
on_or_off: "+" \| "-"
directive_option_name: "DONT_ACCEPT_BLANKLINE" \| "NORMALIZE_WHITESPACE" \| ...
Whitespace is not allowed between the ``+`` or ``-`` and the directive option
name. The directive option name can be any of the option flag names explained
above.
An example's doctest directives modify doctest's behavior for that single
example. Use ``+`` to enable the named behavior, or ``-`` to disable it.
For example, this test passes::
>>> print range(20) # doctest: +NORMALIZE_WHITESPACE
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19]
Without the directive it would fail, both because the actual output doesn't have
two blanks before the single-digit list elements, and because the actual output
is on a single line. This test also passes, and also requires a directive to do
so::
>>> print range(20) # doctest: +ELLIPSIS
[0, 1, ..., 18, 19]
Multiple directives can be used on a single physical line, separated by
commas::
>>> print range(20) # doctest: +ELLIPSIS, +NORMALIZE_WHITESPACE
[0, 1, ..., 18, 19]
If multiple directive comments are used for a single example, then they are
combined::
>>> print range(20) # doctest: +ELLIPSIS
... # doctest: +NORMALIZE_WHITESPACE
[0, 1, ..., 18, 19]
As the previous example shows, you can add ``...`` lines to your example
containing only directives. This can be useful when an example is too long for
a directive to comfortably fit on the same line::
>>> print range(5) + range(10,20) + range(30,40) + range(50,60)
... # doctest: +ELLIPSIS
[0, ..., 4, 10, ..., 19, 30, ..., 39, 50, ..., 59]
Note that since all options are disabled by default, and directives apply only
to the example they appear in, enabling options (via ``+`` in a directive) is
usually the only meaningful choice. However, option flags can also be passed to
functions that run doctests, establishing different defaults. In such cases,
disabling an option via ``-`` in a directive can be useful.
.. versionadded:: 2.4
Support for doctest directives was added.
.. _doctest-warnings:
Warnings
^^^^^^^^
:mod:`doctest` is serious about requiring exact matches in expected output. If
even a single character doesn't match, the test fails. This will probably
surprise you a few times, as you learn exactly what Python does and doesn't
guarantee about output. For example, when printing a dict, Python doesn't
guarantee that the key-value pairs will be printed in any particular order, so a
test like ::
>>> foo()
{"Hermione": "hippogryph", "Harry": "broomstick"}
is vulnerable! One workaround is to do ::
>>> foo() == {"Hermione": "hippogryph", "Harry": "broomstick"}
True
instead. Another is to do ::
>>> d = foo().items()
>>> d.sort()
>>> d
[('Harry', 'broomstick'), ('Hermione', 'hippogryph')]
There are others, but you get the idea.
Another bad idea is to print things that embed an object address, like ::
>>> id(1.0) # certain to fail some of the time
7948648
>>> class C: pass
>>> C() # the default repr() for instances embeds an address
<__main__.C instance at 0x00AC18F0>
The :const:`ELLIPSIS` directive gives a nice approach for the last example::
>>> C() #doctest: +ELLIPSIS
<__main__.C instance at 0x...>
Floating-point numbers are also subject to small output variations across
platforms, because Python defers to the platform C library for float formatting,
and C libraries vary widely in quality here. ::
>>> 1./7 # risky
0.14285714285714285
>>> print 1./7 # safer
0.142857142857
>>> print round(1./7, 6) # much safer
0.142857
Numbers of the form ``I/2.**J`` are safe across all platforms, and I often
contrive doctest examples to produce numbers of that form::
>>> 3./4 # utterly safe
0.75
Simple fractions are also easier for people to understand, and that makes for
better documentation.
.. _doctest-basic-api:
Basic API
---------
The functions :func:`testmod` and :func:`testfile` provide a simple interface to
doctest that should be sufficient for most basic uses. For a less formal
introduction to these two functions, see sections :ref:`doctest-simple-testmod`
and :ref:`doctest-simple-testfile`.
.. function:: testfile(filename[, module_relative][, name][, package][, globs][, verbose][, report][, optionflags][, extraglobs][, raise_on_error][, parser][, encoding])
All arguments except *filename* are optional, and should be specified in keyword
form.
Test examples in the file named *filename*. Return ``(failure_count,
test_count)``.
Optional argument *module_relative* specifies how the filename should be
interpreted:
* If *module_relative* is ``True`` (the default), then *filename* specifies an
OS-independent module-relative path. By default, this path is relative to the
calling module's directory; but if the *package* argument is specified, then it
is relative to that package. To ensure OS-independence, *filename* should use
``/`` characters to separate path segments, and may not be an absolute path
(i.e., it may not begin with ``/``).
* If *module_relative* is ``False``, then *filename* specifies an OS-specific
path. The path may be absolute or relative; relative paths are resolved with
respect to the current working directory.
Optional argument *name* gives the name of the test; by default, or if ``None``,
``os.path.basename(filename)`` is used.
Optional argument *package* is a Python package or the name of a Python package
whose directory should be used as the base directory for a module-relative
filename. If no package is specified, then the calling module's directory is
used as the base directory for module-relative filenames. It is an error to
specify *package* if *module_relative* is ``False``.
Optional argument *globs* gives a dict to be used as the globals when executing
examples. A new shallow copy of this dict is created for the doctest, so its
examples start with a clean slate. By default, or if ``None``, a new empty dict
is used.
Optional argument *extraglobs* gives a dict merged into the globals used to
execute examples. This works like :meth:`dict.update`: if *globs* and
*extraglobs* have a common key, the associated value in *extraglobs* appears in
the combined dict. By default, or if ``None``, no extra globals are used. This
is an advanced feature that allows parameterization of doctests. For example, a
doctest can be written for a base class, using a generic name for the class,
then reused to test any number of subclasses by passing an *extraglobs* dict
mapping the generic name to the subclass to be tested.
Optional argument *verbose* prints lots of stuff if true, and prints only
failures if false; by default, or if ``None``, it's true if and only if ``'-v'``
is in ``sys.argv``.
Optional argument *report* prints a summary at the end when true, else prints
nothing at the end. In verbose mode, the summary is detailed, else the summary
is very brief (in fact, empty if all tests passed).
Optional argument *optionflags* or's together option flags. See section
:ref:`doctest-options`.
Optional argument *raise_on_error* defaults to false. If true, an exception is
raised upon the first failure or unexpected exception in an example. This
allows failures to be post-mortem debugged. Default behavior is to continue
running examples.
Optional argument *parser* specifies a :class:`DocTestParser` (or subclass) that
should be used to extract tests from the files. It defaults to a normal parser
(i.e., ``DocTestParser()``).
Optional argument *encoding* specifies an encoding that should be used to
convert the file to unicode.
.. versionadded:: 2.4
.. versionchanged:: 2.5
The parameter *encoding* was added.
.. function:: testmod([m][, name][, globs][, verbose][, report][, optionflags][, extraglobs][, raise_on_error][, exclude_empty])
All arguments are optional, and all except for *m* should be specified in
keyword form.
Test examples in docstrings in functions and classes reachable from module *m*
(or module :mod:`__main__` if *m* is not supplied or is ``None``), starting with
``m.__doc__``.
Also test examples reachable from dict ``m.__test__``, if it exists and is not
``None``. ``m.__test__`` maps names (strings) to functions, classes and
strings; function and class docstrings are searched for examples; strings are
searched directly, as if they were docstrings.
Only docstrings attached to objects belonging to module *m* are searched.
Return ``(failure_count, test_count)``.
Optional argument *name* gives the name of the module; by default, or if
``None``, ``m.__name__`` is used.
Optional argument *exclude_empty* defaults to false. If true, objects for which
no doctests are found are excluded from consideration. The default is a backward
compatibility hack, so that code still using :meth:`doctest.master.summarize` in
conjunction with :func:`testmod` continues to get output for objects with no
tests. The *exclude_empty* argument to the newer :class:`DocTestFinder`
constructor defaults to true.
Optional arguments *extraglobs*, *verbose*, *report*, *optionflags*,
*raise_on_error*, and *globs* are the same as for function :func:`testfile`
above, except that *globs* defaults to ``m.__dict__``.
.. versionchanged:: 2.3
The parameter *optionflags* was added.
.. versionchanged:: 2.4
The parameters *extraglobs*, *raise_on_error* and *exclude_empty* were added.
.. versionchanged:: 2.5
The optional argument *isprivate*, deprecated in 2.4, was removed.
.. function:: run_docstring_examples(f, globs[, verbose][, name][, compileflags][, optionflags])
Test examples associated with object *f*; for example, *f* may be a string,
a module, a function, or a class object.
A shallow copy of dictionary argument *globs* is used for the execution context.
Optional argument *name* is used in failure messages, and defaults to
``"NoName"``.
If optional argument *verbose* is true, output is generated even if there are no
failures. By default, output is generated only in case of an example failure.
Optional argument *compileflags* gives the set of flags that should be used by
the Python compiler when running the examples. By default, or if ``None``,
flags are deduced corresponding to the set of future features found in *globs*.
Optional argument *optionflags* works as for function :func:`testfile` above.
.. _doctest-unittest-api:
Unittest API
------------
As your collection of doctest'ed modules grows, you'll want a way to run all
their doctests systematically. Prior to Python 2.4, :mod:`doctest` had a barely
documented :class:`Tester` class that supplied a rudimentary way to combine
doctests from multiple modules. :class:`Tester` was feeble, and in practice most
serious Python testing frameworks build on the :mod:`unittest` module, which
supplies many flexible ways to combine tests from multiple sources. So, in
Python 2.4, :mod:`doctest`'s :class:`Tester` class is deprecated, and
:mod:`doctest` provides two functions that can be used to create :mod:`unittest`
test suites from modules and text files containing doctests. To integrate with
:mod:`unittest` test discovery, include a :func:`load_tests` function in your
test module::
import unittest
import doctest
import my_module_with_doctests
def load_tests(loader, tests, ignore):
tests.addTests(doctest.DocTestSuite(my_module_with_doctests))
return tests
There are two main functions for creating :class:`unittest.TestSuite` instances
from text files and modules with doctests:
.. function:: DocFileSuite(*paths, [module_relative][, package][, setUp][, tearDown][, globs][, optionflags][, parser][, encoding])
Convert doctest tests from one or more text files to a
:class:`unittest.TestSuite`.
The returned :class:`unittest.TestSuite` is to be run by the unittest framework
and runs the interactive examples in each file. If an example in any file
fails, then the synthesized unit test fails, and a :exc:`failureException`
exception is raised showing the name of the file containing the test and a
(sometimes approximate) line number.
Pass one or more paths (as strings) to text files to be examined.
Options may be provided as keyword arguments:
Optional argument *module_relative* specifies how the filenames in *paths*
should be interpreted:
* If *module_relative* is ``True`` (the default), then each filename in
*paths* specifies an OS-independent module-relative path. By default, this
path is relative to the calling module's directory; but if the *package*
argument is specified, then it is relative to that package. To ensure
OS-independence, each filename should use ``/`` characters to separate path
segments, and may not be an absolute path (i.e., it may not begin with
``/``).
* If *module_relative* is ``False``, then each filename in *paths* specifies
an OS-specific path. The path may be absolute or relative; relative paths
are resolved with respect to the current working directory.
Optional argument *package* is a Python package or the name of a Python
package whose directory should be used as the base directory for
module-relative filenames in *paths*. If no package is specified, then the
calling module's directory is used as the base directory for module-relative
filenames. It is an error to specify *package* if *module_relative* is
``False``.
Optional argument *setUp* specifies a set-up function for the test suite.
This is called before running the tests in each file. The *setUp* function
will be passed a :class:`DocTest` object. The setUp function can access the
test globals as the *globs* attribute of the test passed.
Optional argument *tearDown* specifies a tear-down function for the test
suite. This is called after running the tests in each file. The *tearDown*
function will be passed a :class:`DocTest` object. The setUp function can
access the test globals as the *globs* attribute of the test passed.
Optional argument *globs* is a dictionary containing the initial global
variables for the tests. A new copy of this dictionary is created for each
test. By default, *globs* is a new empty dictionary.
Optional argument *optionflags* specifies the default doctest options for the
tests, created by or-ing together individual option flags. See section
:ref:`doctest-options`. See function :func:`set_unittest_reportflags` below
for a better way to set reporting options.
Optional argument *parser* specifies a :class:`DocTestParser` (or subclass)
that should be used to extract tests from the files. It defaults to a normal
parser (i.e., ``DocTestParser()``).
Optional argument *encoding* specifies an encoding that should be used to
convert the file to unicode.
.. versionadded:: 2.4
.. versionchanged:: 2.5
The global ``__file__`` was added to the globals provided to doctests
loaded from a text file using :func:`DocFileSuite`.
.. versionchanged:: 2.5
The parameter *encoding* was added.
.. note::
Unlike :func:`testmod` and :class:`DocTestFinder`, this function raises
a :exc:`ValueError` if *module* contains no docstrings. You can prevent
this error by passing a :class:`DocTestFinder` instance as the
*test_finder* argument with its *exclude_empty* keyword argument set
to ``False``::
>>> finder = doctest.DocTestFinder(exclude_empty=False)
>>> suite = doctest.DocTestSuite(test_finder=finder)
.. function:: DocTestSuite([module][, globs][, extraglobs][, test_finder][, setUp][, tearDown][, checker])
Convert doctest tests for a module to a :class:`unittest.TestSuite`.
The returned :class:`unittest.TestSuite` is to be run by the unittest framework
and runs each doctest in the module. If any of the doctests fail, then the
synthesized unit test fails, and a :exc:`failureException` exception is raised
showing the name of the file containing the test and a (sometimes approximate)
line number.
Optional argument *module* provides the module to be tested. It can be a module
object or a (possibly dotted) module name. If not specified, the module calling
this function is used.
Optional argument *globs* is a dictionary containing the initial global
variables for the tests. A new copy of this dictionary is created for each
test. By default, *globs* is a new empty dictionary.
Optional argument *extraglobs* specifies an extra set of global variables, which
is merged into *globs*. By default, no extra globals are used.
Optional argument *test_finder* is the :class:`DocTestFinder` object (or a
drop-in replacement) that is used to extract doctests from the module.
Optional arguments *setUp*, *tearDown*, and *optionflags* are the same as for
function :func:`DocFileSuite` above.
.. versionadded:: 2.3
.. versionchanged:: 2.4
The parameters *globs*, *extraglobs*, *test_finder*, *setUp*, *tearDown*, and
*optionflags* were added; this function now uses the same search technique as
:func:`testmod`.
Under the covers, :func:`DocTestSuite` creates a :class:`unittest.TestSuite` out
of :class:`doctest.DocTestCase` instances, and :class:`DocTestCase` is a
subclass of :class:`unittest.TestCase`. :class:`DocTestCase` isn't documented
here (it's an internal detail), but studying its code can answer questions about
the exact details of :mod:`unittest` integration.
Similarly, :func:`DocFileSuite` creates a :class:`unittest.TestSuite` out of
:class:`doctest.DocFileCase` instances, and :class:`DocFileCase` is a subclass
of :class:`DocTestCase`.
So both ways of creating a :class:`unittest.TestSuite` run instances of
:class:`DocTestCase`. This is important for a subtle reason: when you run
:mod:`doctest` functions yourself, you can control the :mod:`doctest` options in
use directly, by passing option flags to :mod:`doctest` functions. However, if
you're writing a :mod:`unittest` framework, :mod:`unittest` ultimately controls
when and how tests get run. The framework author typically wants to control
:mod:`doctest` reporting options (perhaps, e.g., specified by command line
options), but there's no way to pass options through :mod:`unittest` to
:mod:`doctest` test runners.
For this reason, :mod:`doctest` also supports a notion of :mod:`doctest`
reporting flags specific to :mod:`unittest` support, via this function:
.. function:: set_unittest_reportflags(flags)
Set the :mod:`doctest` reporting flags to use.
Argument *flags* or's together option flags. See section
:ref:`doctest-options`. Only "reporting flags" can be used.
This is a module-global setting, and affects all future doctests run by module
:mod:`unittest`: the :meth:`runTest` method of :class:`DocTestCase` looks at
the option flags specified for the test case when the :class:`DocTestCase`
instance was constructed. If no reporting flags were specified (which is the
typical and expected case), :mod:`doctest`'s :mod:`unittest` reporting flags are
:ref:`bitwise ORed <bitwise>` into the option flags, and the option flags
so augmented are passed to the :class:`DocTestRunner` instance created to
run the doctest. If any reporting flags were specified when the
:class:`DocTestCase` instance was constructed, :mod:`doctest`'s
:mod:`unittest` reporting flags are ignored.
The value of the :mod:`unittest` reporting flags in effect before the function
was called is returned by the function.
.. versionadded:: 2.4
.. _doctest-advanced-api:
Advanced API
------------
The basic API is a simple wrapper that's intended to make doctest easy to use.
It is fairly flexible, and should meet most users' needs; however, if you
require more fine-grained control over testing, or wish to extend doctest's
capabilities, then you should use the advanced API.
The advanced API revolves around two container classes, which are used to store
the interactive examples extracted from doctest cases:
* :class:`Example`: A single Python :term:`statement`, paired with its expected
output.
* :class:`DocTest`: A collection of :class:`Example`\ s, typically extracted
from a single docstring or text file.
Additional processing classes are defined to find, parse, and run, and check
doctest examples:
* :class:`DocTestFinder`: Finds all docstrings in a given module, and uses a
:class:`DocTestParser` to create a :class:`DocTest` from every docstring that
contains interactive examples.
* :class:`DocTestParser`: Creates a :class:`DocTest` object from a string (such
as an object's docstring).
* :class:`DocTestRunner`: Executes the examples in a :class:`DocTest`, and uses
an :class:`OutputChecker` to verify their output.
* :class:`OutputChecker`: Compares the actual output from a doctest example with
the expected output, and decides whether they match.
The relationships among these processing classes are summarized in the following
diagram::
list of:
+------+ +---------+
|module| --DocTestFinder-> | DocTest | --DocTestRunner-> results
+------+ | ^ +---------+ | ^ (printed)
| | | Example | | |
v | | ... | v |
DocTestParser | Example | OutputChecker
+---------+
.. _doctest-doctest:
DocTest Objects
^^^^^^^^^^^^^^^
.. class:: DocTest(examples, globs, name, filename, lineno, docstring)
A collection of doctest examples that should be run in a single namespace. The
constructor arguments are used to initialize the attributes of the same names.
.. versionadded:: 2.4
:class:`DocTest` defines the following attributes. They are initialized by
the constructor, and should not be modified directly.
.. attribute:: examples
A list of :class:`Example` objects encoding the individual interactive Python
examples that should be run by this test.
.. attribute:: globs
The namespace (aka globals) that the examples should be run in. This is a
dictionary mapping names to values. Any changes to the namespace made by the
examples (such as binding new variables) will be reflected in :attr:`globs`
after the test is run.
.. attribute:: name
A string name identifying the :class:`DocTest`. Typically, this is the name
of the object or file that the test was extracted from.
.. attribute:: filename
The name of the file that this :class:`DocTest` was extracted from; or
``None`` if the filename is unknown, or if the :class:`DocTest` was not
extracted from a file.
.. attribute:: lineno
The line number within :attr:`filename` where this :class:`DocTest` begins, or
``None`` if the line number is unavailable. This line number is zero-based
with respect to the beginning of the file.
.. attribute:: docstring
The string that the test was extracted from, or ``None`` if the string is
unavailable, or if the test was not extracted from a string.
.. _doctest-example:
Example Objects
^^^^^^^^^^^^^^^
.. class:: Example(source, want[, exc_msg][, lineno][, indent][, options])
A single interactive example, consisting of a Python statement and its expected
output. The constructor arguments are used to initialize the attributes of the
same names.
.. versionadded:: 2.4
:class:`Example` defines the following attributes. They are initialized by
the constructor, and should not be modified directly.
.. attribute:: source
A string containing the example's source code. This source code consists of a
single Python statement, and always ends with a newline; the constructor adds
a newline when necessary.
.. attribute:: want
The expected output from running the example's source code (either from
stdout, or a traceback in case of exception). :attr:`want` ends with a
newline unless no output is expected, in which case it's an empty string. The
constructor adds a newline when necessary.
.. attribute:: exc_msg
The exception message generated by the example, if the example is expected to
generate an exception; or ``None`` if it is not expected to generate an
exception. This exception message is compared against the return value of
:func:`traceback.format_exception_only`. :attr:`exc_msg` ends with a newline
unless it's ``None``. The constructor adds a newline if needed.
.. attribute:: lineno
The line number within the string containing this example where the example
begins. This line number is zero-based with respect to the beginning of the
containing string.
.. attribute:: indent
The example's indentation in the containing string, i.e., the number of space
characters that precede the example's first prompt.
.. attribute:: options
A dictionary mapping from option flags to ``True`` or ``False``, which is used
to override default options for this example. Any option flags not contained
in this dictionary are left at their default value (as specified by the
:class:`DocTestRunner`'s :attr:`optionflags`). By default, no options are set.
.. _doctest-doctestfinder:
DocTestFinder objects
^^^^^^^^^^^^^^^^^^^^^
.. class:: DocTestFinder([verbose][, parser][, recurse][, exclude_empty])
A processing class used to extract the :class:`DocTest`\ s that are relevant to
a given object, from its docstring and the docstrings of its contained objects.
:class:`DocTest`\ s can currently be extracted from the following object types:
modules, functions, classes, methods, staticmethods, classmethods, and
properties.
The optional argument *verbose* can be used to display the objects searched by
the finder. It defaults to ``False`` (no output).
The optional argument *parser* specifies the :class:`DocTestParser` object (or a
drop-in replacement) that is used to extract doctests from docstrings.
If the optional argument *recurse* is false, then :meth:`DocTestFinder.find`
will only examine the given object, and not any contained objects.
If the optional argument *exclude_empty* is false, then
:meth:`DocTestFinder.find` will include tests for objects with empty docstrings.
.. versionadded:: 2.4
:class:`DocTestFinder` defines the following method:
.. method:: find(obj[, name][, module][, globs][, extraglobs])
Return a list of the :class:`DocTest`\ s that are defined by *obj*'s
docstring, or by any of its contained objects' docstrings.
The optional argument *name* specifies the object's name; this name will be
used to construct names for the returned :class:`DocTest`\ s. If *name* is
not specified, then ``obj.__name__`` is used.
The optional parameter *module* is the module that contains the given object.
If the module is not specified or is ``None``, then the test finder will attempt
to automatically determine the correct module. The object's module is used:
* As a default namespace, if *globs* is not specified.
* To prevent the DocTestFinder from extracting DocTests from objects that are
imported from other modules. (Contained objects with modules other than
*module* are ignored.)
* To find the name of the file containing the object.
* To help find the line number of the object within its file.
If *module* is ``False``, no attempt to find the module will be made. This is
obscure, of use mostly in testing doctest itself: if *module* is ``False``, or
is ``None`` but cannot be found automatically, then all objects are considered
to belong to the (non-existent) module, so all contained objects will
(recursively) be searched for doctests.
The globals for each :class:`DocTest` is formed by combining *globs* and
*extraglobs* (bindings in *extraglobs* override bindings in *globs*). A new
shallow copy of the globals dictionary is created for each :class:`DocTest`.
If *globs* is not specified, then it defaults to the module's *__dict__*, if
specified, or ``{}`` otherwise. If *extraglobs* is not specified, then it
defaults to ``{}``.
.. _doctest-doctestparser:
DocTestParser objects
^^^^^^^^^^^^^^^^^^^^^
.. class:: DocTestParser()
A processing class used to extract interactive examples from a string, and use
them to create a :class:`DocTest` object.
.. versionadded:: 2.4
:class:`DocTestParser` defines the following methods:
.. method:: get_doctest(string, globs, name, filename, lineno)
Extract all doctest examples from the given string, and collect them into a
:class:`DocTest` object.
*globs*, *name*, *filename*, and *lineno* are attributes for the new
:class:`DocTest` object. See the documentation for :class:`DocTest` for more
information.
.. method:: get_examples(string[, name])
Extract all doctest examples from the given string, and return them as a list
of :class:`Example` objects. Line numbers are 0-based. The optional argument
*name* is a name identifying this string, and is only used for error messages.
.. method:: parse(string[, name])
Divide the given string into examples and intervening text, and return them as
a list of alternating :class:`Example`\ s and strings. Line numbers for the
:class:`Example`\ s are 0-based. The optional argument *name* is a name
identifying this string, and is only used for error messages.
.. _doctest-doctestrunner:
DocTestRunner objects
^^^^^^^^^^^^^^^^^^^^^
.. class:: DocTestRunner([checker][, verbose][, optionflags])
A processing class used to execute and verify the interactive examples in a
:class:`DocTest`.
The comparison between expected outputs and actual outputs is done by an
:class:`OutputChecker`. This comparison may be customized with a number of
option flags; see section :ref:`doctest-options` for more information. If the
option flags are insufficient, then the comparison may also be customized by
passing a subclass of :class:`OutputChecker` to the constructor.
The test runner's display output can be controlled in two ways. First, an output
function can be passed to :meth:`TestRunner.run`; this function will be called
with strings that should be displayed. It defaults to ``sys.stdout.write``. If
capturing the output is not sufficient, then the display output can be also
customized by subclassing DocTestRunner, and overriding the methods
:meth:`report_start`, :meth:`report_success`,
:meth:`report_unexpected_exception`, and :meth:`report_failure`.
The optional keyword argument *checker* specifies the :class:`OutputChecker`
object (or drop-in replacement) that should be used to compare the expected
outputs to the actual outputs of doctest examples.
The optional keyword argument *verbose* controls the :class:`DocTestRunner`'s
verbosity. If *verbose* is ``True``, then information is printed about each
example, as it is run. If *verbose* is ``False``, then only failures are
printed. If *verbose* is unspecified, or ``None``, then verbose output is used
iff the command-line switch ``-v`` is used.
The optional keyword argument *optionflags* can be used to control how the test
runner compares expected output to actual output, and how it displays failures.
For more information, see section :ref:`doctest-options`.
.. versionadded:: 2.4
:class:`DocTestParser` defines the following methods:
.. method:: report_start(out, test, example)
Report that the test runner is about to process the given example. This method
is provided to allow subclasses of :class:`DocTestRunner` to customize their
output; it should not be called directly.
*example* is the example about to be processed. *test* is the test
*containing example*. *out* is the output function that was passed to
:meth:`DocTestRunner.run`.
.. method:: report_success(out, test, example, got)
Report that the given example ran successfully. This method is provided to
allow subclasses of :class:`DocTestRunner` to customize their output; it
should not be called directly.
*example* is the example about to be processed. *got* is the actual output
from the example. *test* is the test containing *example*. *out* is the
output function that was passed to :meth:`DocTestRunner.run`.
.. method:: report_failure(out, test, example, got)
Report that the given example failed. This method is provided to allow
subclasses of :class:`DocTestRunner` to customize their output; it should not
be called directly.
*example* is the example about to be processed. *got* is the actual output
from the example. *test* is the test containing *example*. *out* is the
output function that was passed to :meth:`DocTestRunner.run`.
.. method:: report_unexpected_exception(out, test, example, exc_info)
Report that the given example raised an unexpected exception. This method is
provided to allow subclasses of :class:`DocTestRunner` to customize their
output; it should not be called directly.
*example* is the example about to be processed. *exc_info* is a tuple
containing information about the unexpected exception (as returned by
:func:`sys.exc_info`). *test* is the test containing *example*. *out* is the
output function that was passed to :meth:`DocTestRunner.run`.
.. method:: run(test[, compileflags][, out][, clear_globs])
Run the examples in *test* (a :class:`DocTest` object), and display the
results using the writer function *out*.
The examples are run in the namespace ``test.globs``. If *clear_globs* is
true (the default), then this namespace will be cleared after the test runs,
to help with garbage collection. If you would like to examine the namespace
after the test completes, then use *clear_globs=False*.
*compileflags* gives the set of flags that should be used by the Python
compiler when running the examples. If not specified, then it will default to
the set of future-import flags that apply to *globs*.
The output of each example is checked using the :class:`DocTestRunner`'s
output checker, and the results are formatted by the
:meth:`DocTestRunner.report_\*` methods.
.. method:: summarize([verbose])
Print a summary of all the test cases that have been run by this DocTestRunner,
and return a :term:`named tuple` ``TestResults(failed, attempted)``.
The optional *verbose* argument controls how detailed the summary is. If the
verbosity is not specified, then the :class:`DocTestRunner`'s verbosity is
used.
.. versionchanged:: 2.6
Use a named tuple.
.. _doctest-outputchecker:
OutputChecker objects
^^^^^^^^^^^^^^^^^^^^^
.. class:: OutputChecker()
A class used to check the whether the actual output from a doctest example
matches the expected output. :class:`OutputChecker` defines two methods:
:meth:`check_output`, which compares a given pair of outputs, and returns true
if they match; and :meth:`output_difference`, which returns a string describing
the differences between two outputs.
.. versionadded:: 2.4
:class:`OutputChecker` defines the following methods:
.. method:: check_output(want, got, optionflags)
Return ``True`` iff the actual output from an example (*got*) matches the
expected output (*want*). These strings are always considered to match if
they are identical; but depending on what option flags the test runner is
using, several non-exact match types are also possible. See section
:ref:`doctest-options` for more information about option flags.
.. method:: output_difference(example, got, optionflags)
Return a string describing the differences between the expected output for a
given example (*example*) and the actual output (*got*). *optionflags* is the
set of option flags used to compare *want* and *got*.
.. _doctest-debugging:
Debugging
---------
Doctest provides several mechanisms for debugging doctest examples:
* Several functions convert doctests to executable Python programs, which can be
run under the Python debugger, :mod:`pdb`.
* The :class:`DebugRunner` class is a subclass of :class:`DocTestRunner` that
raises an exception for the first failing example, containing information about
that example. This information can be used to perform post-mortem debugging on
the example.
* The :mod:`unittest` cases generated by :func:`DocTestSuite` support the
:meth:`debug` method defined by :class:`unittest.TestCase`.
* You can add a call to :func:`pdb.set_trace` in a doctest example, and you'll
drop into the Python debugger when that line is executed. Then you can inspect
current values of variables, and so on. For example, suppose :file:`a.py`
contains just this module docstring::
"""
>>> def f(x):
... g(x*2)
>>> def g(x):
... print x+3
... import pdb; pdb.set_trace()
>>> f(3)
9
"""
Then an interactive Python session may look like this::
>>> import a, doctest
>>> doctest.testmod(a)
--Return--
> <doctest a[1]>(3)g()->None
-> import pdb; pdb.set_trace()
(Pdb) list
1 def g(x):
2 print x+3
3 -> import pdb; pdb.set_trace()
[EOF]
(Pdb) print x
6
(Pdb) step
--Return--
> <doctest a[0]>(2)f()->None
-> g(x*2)
(Pdb) list
1 def f(x):
2 -> g(x*2)
[EOF]
(Pdb) print x
3
(Pdb) step
--Return--
> <doctest a[2]>(1)?()->None
-> f(3)
(Pdb) cont
(0, 3)
>>>
.. versionchanged:: 2.4
The ability to use :func:`pdb.set_trace` usefully inside doctests was added.
Functions that convert doctests to Python code, and possibly run the synthesized
code under the debugger:
.. function:: script_from_examples(s)
Convert text with examples to a script.
Argument *s* is a string containing doctest examples. The string is converted
to a Python script, where doctest examples in *s* are converted to regular code,
and everything else is converted to Python comments. The generated script is
returned as a string. For example, ::
import doctest
print doctest.script_from_examples(r"""
Set x and y to 1 and 2.
>>> x, y = 1, 2
Print their sum:
>>> print x+y
3
""")
displays::
# Set x and y to 1 and 2.
x, y = 1, 2
#
# Print their sum:
print x+y
# Expected:
## 3
This function is used internally by other functions (see below), but can also be
useful when you want to transform an interactive Python session into a Python
script.
.. versionadded:: 2.4
.. function:: testsource(module, name)
Convert the doctest for an object to a script.
Argument *module* is a module object, or dotted name of a module, containing the
object whose doctests are of interest. Argument *name* is the name (within the
module) of the object with the doctests of interest. The result is a string,
containing the object's docstring converted to a Python script, as described for
:func:`script_from_examples` above. For example, if module :file:`a.py`
contains a top-level function :func:`f`, then ::
import a, doctest
print doctest.testsource(a, "a.f")
prints a script version of function :func:`f`'s docstring, with doctests
converted to code, and the rest placed in comments.
.. versionadded:: 2.3
.. function:: debug(module, name[, pm])
Debug the doctests for an object.
The *module* and *name* arguments are the same as for function
:func:`testsource` above. The synthesized Python script for the named object's
docstring is written to a temporary file, and then that file is run under the
control of the Python debugger, :mod:`pdb`.
A shallow copy of ``module.__dict__`` is used for both local and global
execution context.
Optional argument *pm* controls whether post-mortem debugging is used. If *pm*
has a true value, the script file is run directly, and the debugger gets
involved only if the script terminates via raising an unhandled exception. If
it does, then post-mortem debugging is invoked, via :func:`pdb.post_mortem`,
passing the traceback object from the unhandled exception. If *pm* is not
specified, or is false, the script is run under the debugger from the start, via
passing an appropriate :func:`execfile` call to :func:`pdb.run`.
.. versionadded:: 2.3
.. versionchanged:: 2.4
The *pm* argument was added.
.. function:: debug_src(src[, pm][, globs])
Debug the doctests in a string.
This is like function :func:`debug` above, except that a string containing
doctest examples is specified directly, via the *src* argument.
Optional argument *pm* has the same meaning as in function :func:`debug` above.
Optional argument *globs* gives a dictionary to use as both local and global
execution context. If not specified, or ``None``, an empty dictionary is used.
If specified, a shallow copy of the dictionary is used.
.. versionadded:: 2.4
The :class:`DebugRunner` class, and the special exceptions it may raise, are of
most interest to testing framework authors, and will only be sketched here. See
the source code, and especially :class:`DebugRunner`'s docstring (which is a
doctest!) for more details:
.. class:: DebugRunner([checker][, verbose][, optionflags])
A subclass of :class:`DocTestRunner` that raises an exception as soon as a
failure is encountered. If an unexpected exception occurs, an
:exc:`UnexpectedException` exception is raised, containing the test, the
example, and the original exception. If the output doesn't match, then a
:exc:`DocTestFailure` exception is raised, containing the test, the example, and
the actual output.
For information about the constructor parameters and methods, see the
documentation for :class:`DocTestRunner` in section :ref:`doctest-advanced-api`.
There are two exceptions that may be raised by :class:`DebugRunner` instances:
.. exception:: DocTestFailure(test, example, got)
An exception raised by :class:`DocTestRunner` to signal that a doctest example's
actual output did not match its expected output. The constructor arguments are
used to initialize the attributes of the same names.
:exc:`DocTestFailure` defines the following attributes:
.. attribute:: DocTestFailure.test
The :class:`DocTest` object that was being run when the example failed.
.. attribute:: DocTestFailure.example
The :class:`Example` that failed.
.. attribute:: DocTestFailure.got
The example's actual output.
.. exception:: UnexpectedException(test, example, exc_info)
An exception raised by :class:`DocTestRunner` to signal that a doctest
example raised an unexpected exception. The constructor arguments are used
to initialize the attributes of the same names.
:exc:`UnexpectedException` defines the following attributes:
.. attribute:: UnexpectedException.test
The :class:`DocTest` object that was being run when the example failed.
.. attribute:: UnexpectedException.example
The :class:`Example` that failed.
.. attribute:: UnexpectedException.exc_info
A tuple containing information about the unexpected exception, as returned by
:func:`sys.exc_info`.
.. _doctest-soapbox:
Soapbox
-------
As mentioned in the introduction, :mod:`doctest` has grown to have three primary
uses:
#. Checking examples in docstrings.
#. Regression testing.
#. Executable documentation / literate testing.
These uses have different requirements, and it is important to distinguish them.
In particular, filling your docstrings with obscure test cases makes for bad
documentation.
When writing a docstring, choose docstring examples with care. There's an art to
this that needs to be learned---it may not be natural at first. Examples should
add genuine value to the documentation. A good example can often be worth many
words. If done with care, the examples will be invaluable for your users, and
will pay back the time it takes to collect them many times over as the years go
by and things change. I'm still amazed at how often one of my :mod:`doctest`
examples stops working after a "harmless" change.
Doctest also makes an excellent tool for regression testing, especially if you
don't skimp on explanatory text. By interleaving prose and examples, it becomes
much easier to keep track of what's actually being tested, and why. When a test
fails, good prose can make it much easier to figure out what the problem is, and
how it should be fixed. It's true that you could write extensive comments in
code-based testing, but few programmers do. Many have found that using doctest
approaches instead leads to much clearer tests. Perhaps this is simply because
doctest makes writing prose a little easier than writing code, while writing
comments in code is a little harder. I think it goes deeper than just that:
the natural attitude when writing a doctest-based test is that you want to
explain the fine points of your software, and illustrate them with examples.
This in turn naturally leads to test files that start with the simplest
features, and logically progress to complications and edge cases. A coherent
narrative is the result, instead of a collection of isolated functions that test
isolated bits of functionality seemingly at random. It's a different attitude,
and produces different results, blurring the distinction between testing and
explaining.
Regression testing is best confined to dedicated objects or files. There are
several options for organizing tests:
* Write text files containing test cases as interactive examples, and test the
files using :func:`testfile` or :func:`DocFileSuite`. This is recommended,
although is easiest to do for new projects, designed from the start to use
doctest.
* Define functions named ``_regrtest_topic`` that consist of single docstrings,
containing test cases for the named topics. These functions can be included in
the same file as the module, or separated out into a separate test file.
* Define a ``__test__`` dictionary mapping from regression test topics to
docstrings containing test cases.
When you have placed your tests in a module, the module can itself be the test
runner. When a test fails, you can arrange for your test runner to re-run only
the failing doctest while you debug the problem. Here is a minimal example of
such a test runner::
if __name__ == '__main__':
import doctest
flags = doctest.REPORT_NDIFF|doctest.REPORT_ONLY_FIRST_FAILURE
if len(sys.argv) > 1:
name = sys.argv[1]
if name in globals():
obj = globals()[name]
else:
obj = __test__[name]
doctest.run_docstring_examples(obj, globals(), name=name,
optionflags=flags)
else:
fail, total = doctest.testmod(optionflags=flags)
print("{} failures out of {} tests".format(fail, total))
.. rubric:: Footnotes
.. [#] Examples containing both expected output and an exception are not supported.
Trying to guess where one ends and the other begins is too error-prone, and that
also makes for a confusing test.