/** @file
Produce FMP instance for system firmware.
Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "SystemFirmwareDxe.h"
EFI_GUID gSystemFmpLastAttemptVariableGuid = SYSTEM_FMP_LAST_ATTEMPT_VARIABLE_GUID;
EFI_GUID gSystemFmpProtocolGuid = SYSTEM_FMP_PROTOCOL_GUID;
EFI_FIRMWARE_MANAGEMENT_PROTOCOL mFirmwareManagementProtocol = {
FmpGetImageInfo,
FmpGetImage,
FmpSetImage,
FmpCheckImage,
FmpGetPackageInfo,
FmpSetPackageInfo
};
/**
Returns information about the current firmware image(s) of the device.
This function allows a copy of the current firmware image to be created and saved.
The saved copy could later been used, for example, in firmware image recovery or rollback.
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
@param[in, out] ImageInfoSize A pointer to the size, in bytes, of the ImageInfo buffer.
On input, this is the size of the buffer allocated by the caller.
On output, it is the size of the buffer returned by the firmware
if the buffer was large enough, or the size of the buffer needed
to contain the image(s) information if the buffer was too small.
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
descriptors or firmware images within this device.
@param[out] DescriptorSize A pointer to the location in which firmware returns the size, in bytes,
of an individual EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] PackageVersion A version number that represents all the firmware images in the device.
The format is vendor specific and new version must have a greater value
than the old version. If PackageVersion is not supported, the value is
0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version comparison
is to be performed using PackageVersionName. A value of 0xFFFFFFFD indicates
that package version update is in progress.
@param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing the
package version name. The buffer is allocated by this function with
AllocatePool(), and it is the caller's responsibility to free it with a call
to FreePool().
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
needed to hold the image(s) information is returned in ImageInfoSize.
@retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
**/
EFI_STATUS
EFIAPI
FmpGetImageInfo (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN OUT UINTN *ImageInfoSize,
IN OUT EFI_FIRMWARE_IMAGE_DESCRIPTOR *ImageInfo,
OUT UINT32 *DescriptorVersion,
OUT UINT8 *DescriptorCount,
OUT UINTN *DescriptorSize,
OUT UINT32 *PackageVersion,
OUT CHAR16 **PackageVersionName
)
{
SYSTEM_FMP_PRIVATE_DATA *SystemFmpPrivate;
EDKII_SYSTEM_FIRMWARE_IMAGE_DESCRIPTOR *ImageDescriptor;
SystemFmpPrivate = SYSTEM_FMP_PRIVATE_DATA_FROM_FMP(This);
if(ImageInfoSize == NULL) {
return EFI_INVALID_PARAMETER;
}
if (*ImageInfoSize < sizeof(EFI_FIRMWARE_IMAGE_DESCRIPTOR) * SystemFmpPrivate->DescriptorCount) {
*ImageInfoSize = sizeof(EFI_FIRMWARE_IMAGE_DESCRIPTOR) * SystemFmpPrivate->DescriptorCount;
return EFI_BUFFER_TOO_SMALL;
}
if (ImageInfo == NULL ||
DescriptorVersion == NULL ||
DescriptorCount == NULL ||
DescriptorSize == NULL ||
PackageVersion == NULL ||
PackageVersionName == NULL) {
return EFI_INVALID_PARAMETER;
}
*ImageInfoSize = sizeof(EFI_FIRMWARE_IMAGE_DESCRIPTOR) * SystemFmpPrivate->DescriptorCount;
*DescriptorSize = sizeof(EFI_FIRMWARE_IMAGE_DESCRIPTOR);
*DescriptorCount = SystemFmpPrivate->DescriptorCount;
*DescriptorVersion = EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION;
//
// supports 1 ImageInfo descriptor
//
ImageDescriptor = SystemFmpPrivate->ImageDescriptor;
ImageInfo->ImageIndex = ImageDescriptor->ImageIndex;
CopyGuid (&ImageInfo->ImageTypeId, &ImageDescriptor->ImageTypeId);
ImageInfo->ImageId = ImageDescriptor->ImageId;
if (ImageDescriptor->ImageIdNameStringOffset != 0) {
ImageInfo->ImageIdName = (CHAR16 *)((UINTN)ImageDescriptor + ImageDescriptor->ImageIdNameStringOffset);
} else {
ImageInfo->ImageIdName = NULL;
}
ImageInfo->Version = ImageDescriptor->Version;
if (ImageDescriptor->VersionNameStringOffset != 0) {
ImageInfo->VersionName = (CHAR16 *)((UINTN)ImageDescriptor + ImageDescriptor->VersionNameStringOffset);
} else {
ImageInfo->VersionName = NULL;
}
ImageInfo->Size = (UINTN)ImageDescriptor->Size;
ImageInfo->AttributesSupported = ImageDescriptor->AttributesSupported;
ImageInfo->AttributesSetting = ImageDescriptor->AttributesSetting;
ImageInfo->Compatibilities = ImageDescriptor->Compatibilities;
ImageInfo->LowestSupportedImageVersion = ImageDescriptor->LowestSupportedImageVersion;
ImageInfo->LastAttemptVersion = SystemFmpPrivate->LastAttempt.LastAttemptVersion;
ImageInfo->LastAttemptStatus = SystemFmpPrivate->LastAttempt.LastAttemptStatus;
ImageInfo->HardwareInstance = ImageDescriptor->HardwareInstance;
//
// package version
//
*PackageVersion = ImageDescriptor->PackageVersion;
if (ImageDescriptor->PackageVersionNameStringOffset != 0) {
*PackageVersionName = (VOID *)((UINTN)ImageDescriptor + ImageDescriptor->PackageVersionNameStringOffset);
*PackageVersionName = AllocateCopyPool(StrSize(*PackageVersionName), *PackageVersionName);
} else {
*PackageVersionName = NULL;
}
return EFI_SUCCESS;
}
/**
Retrieves a copy of the current firmware image of the device.
This function allows a copy of the current firmware image to be created and saved.
The saved copy could later been used, for example, in firmware image recovery or rollback.
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[in,out] Image Points to the buffer where the current image is copied to.
@param[in,out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
image. The current buffer size needed to hold the image is returned
in ImageSize.
@retval EFI_INVALID_PARAMETER The Image was NULL.
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
**/
EFI_STATUS
EFIAPI
FmpGetImage (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN UINT8 ImageIndex,
IN OUT VOID *Image,
IN OUT UINTN *ImageSize
)
{
return EFI_UNSUPPORTED;
}
/**
Checks if the firmware image is valid for the device.
This function allows firmware update application to validate the firmware image without
invoking the SetImage() first.
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[in] Image Points to the new image.
@param[in] ImageSize Size of the new image in bytes.
@param[out] ImageUpdatable Indicates if the new image is valid for update. It also provides,
if available, additional information if the image is invalid.
@retval EFI_SUCCESS The image was successfully checked.
@retval EFI_INVALID_PARAMETER The Image was NULL.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
**/
EFI_STATUS
EFIAPI
FmpCheckImage (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN UINT8 ImageIndex,
IN CONST VOID *Image,
IN UINTN ImageSize,
OUT UINT32 *ImageUpdatable
)
{
return EFI_UNSUPPORTED;
}
/**
Returns information about the firmware package.
This function returns package information.
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
@param[out] PackageVersion A version number that represents all the firmware images in the device.
The format is vendor specific and new version must have a greater value
than the old version. If PackageVersion is not supported, the value is
0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version
comparison is to be performed using PackageVersionName. A value of
0xFFFFFFFD indicates that package version update is in progress.
@param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing
the package version name. The buffer is allocated by this function with
AllocatePool(), and it is the caller's responsibility to free it with a
call to FreePool().
@param[out] PackageVersionNameMaxLen The maximum length of package version name if device supports update of
package version name. A value of 0 indicates the device does not support
update of package version name. Length is the number of Unicode characters,
including the terminating null character.
@param[out] AttributesSupported Package attributes that are supported by this device. See 'Package Attribute
Definitions' for possible returned values of this parameter. A value of 1
indicates the attribute is supported and the current setting value is
indicated in AttributesSetting. A value of 0 indicates the attribute is not
supported and the current setting value in AttributesSetting is meaningless.
@param[out] AttributesSetting Package attributes. See 'Package Attribute Definitions' for possible returned
values of this parameter
@retval EFI_SUCCESS The package information was successfully returned.
@retval EFI_UNSUPPORTED The operation is not supported.
**/
EFI_STATUS
EFIAPI
FmpGetPackageInfo (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
OUT UINT32 *PackageVersion,
OUT CHAR16 **PackageVersionName,
OUT UINT32 *PackageVersionNameMaxLen,
OUT UINT64 *AttributesSupported,
OUT UINT64 *AttributesSetting
)
{
return EFI_UNSUPPORTED;
}
/**
Updates information about the firmware package.
This function updates package information.
This function returns EFI_UNSUPPORTED if the package information is not updatable.
VendorCode enables vendor to implement vendor-specific package information update policy.
Null if the caller did not specify this policy or use the default policy.
@param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.
@param[in] Image Points to the authentication image.
Null if authentication is not required.
@param[in] ImageSize Size of the authentication image in bytes.
0 if authentication is not required.
@param[in] VendorCode This enables vendor to implement vendor-specific firmware
image update policy.
Null indicates the caller did not specify this policy or use
the default policy.
@param[in] PackageVersion The new package version.
@param[in] PackageVersionName A pointer to the new null-terminated Unicode string representing
the package version name.
The string length is equal to or less than the value returned in
PackageVersionNameMaxLen.
@retval EFI_SUCCESS The device was successfully updated with the new package
information.
@retval EFI_INVALID_PARAMETER The PackageVersionName length is longer than the value
returned in PackageVersionNameMaxLen.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.
**/
EFI_STATUS
EFIAPI
FmpSetPackageInfo (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN CONST VOID *Image,
IN UINTN ImageSize,
IN CONST VOID *VendorCode,
IN UINT32 PackageVersion,
IN CONST CHAR16 *PackageVersionName
)
{
return EFI_UNSUPPORTED;
}
/**
Initialize SystemFmpDriver private data structure.
@param[in] SystemFmpPrivate private data structure to be initialized.
@return EFI_SUCCESS private data is initialized.
**/
EFI_STATUS
InitializePrivateData (
IN SYSTEM_FMP_PRIVATE_DATA *SystemFmpPrivate
)
{
EFI_STATUS VarStatus;
UINTN VarSize;
SystemFmpPrivate->Signature = SYSTEM_FMP_PRIVATE_DATA_SIGNATURE;
SystemFmpPrivate->Handle = NULL;
SystemFmpPrivate->DescriptorCount = 1;
CopyMem(&SystemFmpPrivate->Fmp, &mFirmwareManagementProtocol, sizeof(EFI_FIRMWARE_MANAGEMENT_PROTOCOL));
SystemFmpPrivate->ImageDescriptor = PcdGetPtr(PcdEdkiiSystemFirmwareImageDescriptor);
SystemFmpPrivate->LastAttempt.LastAttemptVersion = 0x0;
SystemFmpPrivate->LastAttempt.LastAttemptStatus = 0x0;
VarSize = sizeof(SystemFmpPrivate->LastAttempt);
VarStatus = gRT->GetVariable(
SYSTEM_FMP_LAST_ATTEMPT_VARIABLE_NAME,
&gSystemFmpLastAttemptVariableGuid,
NULL,
&VarSize,
&SystemFmpPrivate->LastAttempt
);
DEBUG((DEBUG_INFO, "GetLastAttemp - %r\n", VarStatus));
DEBUG((DEBUG_INFO, "GetLastAttemp Version - 0x%x, State - 0x%x\n", SystemFmpPrivate->LastAttempt.LastAttemptVersion, SystemFmpPrivate->LastAttempt.LastAttemptStatus));
return EFI_SUCCESS;
}
/**
Return if this FMP is a system FMP or a device FMP, based upon FmpImageInfo.
@param[in] FmpImageInfo A pointer to EFI_FIRMWARE_IMAGE_DESCRIPTOR
@retval TRUE It is a system FMP.
@retval FALSE It is a device FMP.
**/
BOOLEAN
IsSystemFmp (
IN EFI_FIRMWARE_IMAGE_DESCRIPTOR *FmpImageInfo
)
{
GUID *Guid;
UINTN Count;
UINTN Index;
Guid = PcdGetPtr(PcdSystemFmpCapsuleImageTypeIdGuid);
Count = PcdGetSize(PcdSystemFmpCapsuleImageTypeIdGuid) / sizeof(GUID);
for (Index = 0; Index < Count; Index++, Guid++) {
if (CompareGuid(&FmpImageInfo->ImageTypeId, Guid)) {
return TRUE;
}
}
return FALSE;
}