/** @file
Main file for Parse shell level 2 function.
(C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.<BR>
Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "UefiShellLevel2CommandsLib.h"
/**
Check if data is coming from StdIn output.
@param[in] None
@retval TRUE StdIn stream data available to parse
@retval FALSE StdIn stream data is not available to parse.
**/
BOOLEAN
IsStdInDataAvailable (
VOID
)
{
SHELL_FILE_HANDLE FileHandle;
EFI_STATUS Status;
CHAR16 CharBuffer;
UINTN CharSize;
UINT64 OriginalFilePosition;
Status = EFI_SUCCESS;
FileHandle = NULL;
OriginalFilePosition = 0;
if (ShellOpenFileByName (L">i", &FileHandle, EFI_FILE_MODE_READ, 0) == EFI_SUCCESS) {
CharSize = sizeof(CHAR16);
gEfiShellProtocol->GetFilePosition (FileHandle, &OriginalFilePosition);
Status = gEfiShellProtocol->ReadFile (FileHandle, &CharSize, &CharBuffer);
if (EFI_ERROR (Status) || (CharSize != sizeof(CHAR16))) {
return FALSE;
}
gEfiShellProtocol->SetFilePosition(FileHandle, OriginalFilePosition);
}
if (FileHandle == NULL) {
return FALSE;
} else {
return TRUE;
}
}
/**
Function to read a single line (up to but not including the \n) using StdIn data from a SHELL_FILE_HANDLE.
If the position upon start is 0, then the Ascii Boolean will be set. This should be
maintained and not changed for all operations with the same file.
@param[in] Handle SHELL_FILE_HANDLE to read from.
@param[in, out] Buffer The pointer to buffer to read into.
@param[in, out] Size The pointer to number of bytes in Buffer.
@param[in] Truncate If the buffer is large enough, this has no effect.
If the buffer is is too small and Truncate is TRUE,
the line will be truncated.
If the buffer is is too small and Truncate is FALSE,
then no read will occur.
@retval EFI_SUCCESS The operation was successful. The line is stored in
Buffer.
@retval EFI_INVALID_PARAMETER Handle was NULL.
@retval EFI_INVALID_PARAMETER Size was NULL.
@retval EFI_BUFFER_TOO_SMALL Size was not large enough to store the line.
Size was updated to the minimum space required.
**/
EFI_STATUS
ShellFileHandleReadStdInLine(
IN SHELL_FILE_HANDLE Handle,
IN OUT CHAR16 *Buffer,
IN OUT UINTN *Size,
IN BOOLEAN Truncate
)
{
EFI_STATUS Status;
CHAR16 CharBuffer;
UINTN CharSize;
UINTN CountSoFar;
UINT64 OriginalFilePosition;
if (Handle == NULL
||Size == NULL
){
return (EFI_INVALID_PARAMETER);
}
if (Buffer == NULL) {
ASSERT(*Size == 0);
} else {
*Buffer = CHAR_NULL;
}
gEfiShellProtocol->GetFilePosition (Handle, &OriginalFilePosition);
for (CountSoFar = 0;;CountSoFar++){
CharBuffer = 0;
CharSize = sizeof(CHAR16);
Status = gEfiShellProtocol->ReadFile (Handle, &CharSize, &CharBuffer);
if ( EFI_ERROR(Status)
|| CharSize == 0
|| (CharBuffer == L'\n')
){
break;
}
//
// if we have space save it...
//
if ((CountSoFar+1)*sizeof(CHAR16) < *Size){
ASSERT(Buffer != NULL);
((CHAR16*)Buffer)[CountSoFar] = CharBuffer;
((CHAR16*)Buffer)[CountSoFar+1] = CHAR_NULL;
}
}
//
// if we ran out of space tell when...
//
if ((CountSoFar+1)*sizeof(CHAR16) > *Size){
*Size = (CountSoFar+1)*sizeof(CHAR16);
if (!Truncate) {
gEfiShellProtocol->SetFilePosition(Handle, OriginalFilePosition);
} else {
DEBUG((DEBUG_WARN, "The line was truncated in ShellFileHandleReadLine"));
}
return (EFI_BUFFER_TOO_SMALL);
}
while(Buffer[StrLen(Buffer)-1] == L'\r') {
Buffer[StrLen(Buffer)-1] = CHAR_NULL;
}
return (Status);
}
/**
Function to read a single line using StdIn from a SHELL_FILE_HANDLE. The \n is not included in the returned
buffer. The returned buffer must be callee freed.
If the position upon start is 0, then the Ascii Boolean will be set. This should be
maintained and not changed for all operations with the same file.
@param[in] Handle SHELL_FILE_HANDLE to read from.
@return The line of text from the file.
@retval NULL There was not enough memory available.
@sa ShellFileHandleReadLine
**/
CHAR16*
ParseReturnStdInLine (
IN SHELL_FILE_HANDLE Handle
)
{
CHAR16 *RetVal;
UINTN Size;
EFI_STATUS Status;
Size = 0;
RetVal = NULL;
Status = ShellFileHandleReadStdInLine (Handle, RetVal, &Size, FALSE);
if (Status == EFI_BUFFER_TOO_SMALL) {
RetVal = AllocateZeroPool(Size);
if (RetVal == NULL) {
return (NULL);
}
Status = ShellFileHandleReadStdInLine (Handle, RetVal, &Size, FALSE);
}
if (EFI_ERROR(Status) && (RetVal != NULL)) {
FreePool(RetVal);
RetVal = NULL;
}
return (RetVal);
}
/**
Handle stings for SFO Output with escape character ^ in a string
1. Quotation marks in the string must be escaped by using a ^ character (i.e. ^").
2. The ^ character may be inserted using ^^.
@param[in] String The Unicode NULL-terminated string.
@retval NewString The new string handled for SFO.
**/
EFI_STRING
HandleStringWithEscapeCharForParse (
IN CHAR16 *String
)
{
EFI_STRING NewStr;
EFI_STRING StrWalker;
EFI_STRING ReturnStr;
if (String == NULL) {
return NULL;
}
//
// start to parse the input string.
//
NewStr = AllocateZeroPool (StrSize (String));
if (NewStr == NULL) {
return NULL;
}
ReturnStr = NewStr;
StrWalker = String;
while (*StrWalker != CHAR_NULL) {
if (*StrWalker == L'^' && (*(StrWalker + 1) == L'^' || *(StrWalker + 1) == L'"')) {
*NewStr = *(StrWalker + 1);
StrWalker++;
} else {
*NewStr = *StrWalker;
}
StrWalker++;
NewStr++;
}
return ReturnStr;
}
/**
Do the actual parsing of the file. the file should be SFO output from a
shell command or a similar format.
@param[in] FileName The filename to open.
@param[in] TableName The name of the table to find.
@param[in] ColumnIndex The column number to get.
@param[in] TableNameInstance Which instance of the table to get (row).
@param[in] ShellCommandInstance Which instance of the command to get.
@param[in] StreamingUnicode Indicates Input file is StdIn Unicode streaming data or not
@retval SHELL_NOT_FOUND The requested instance was not found.
@retval SHELL_SUCCESS The operation was successful.
**/
SHELL_STATUS
PerformParsing(
IN CONST CHAR16 *FileName,
IN CONST CHAR16 *TableName,
IN CONST UINTN ColumnIndex,
IN CONST UINTN TableNameInstance,
IN CONST UINTN ShellCommandInstance,
IN BOOLEAN StreamingUnicode
)
{
SHELL_FILE_HANDLE FileHandle;
EFI_STATUS Status;
BOOLEAN Ascii;
UINTN LoopVariable;
UINTN ColumnLoop;
CHAR16 *TempLine;
CHAR16 *ColumnPointer;
SHELL_STATUS ShellStatus;
CHAR16 *TempSpot;
CHAR16 *SfoString;
ASSERT(FileName != NULL);
ASSERT(TableName != NULL);
ShellStatus = SHELL_SUCCESS;
Status = ShellOpenFileByName(FileName, &FileHandle, EFI_FILE_MODE_READ, 0);
if (EFI_ERROR(Status)) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_FILE_OPEN_FAIL), gShellLevel2HiiHandle, L"parse", FileName);
ShellStatus = SHELL_NOT_FOUND;
} else if (!EFI_ERROR (FileHandleIsDirectory (FileHandle))) {
ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_GEN_NOT_FILE), gShellLevel2HiiHandle, L"parse", FileName);
ShellStatus = SHELL_NOT_FOUND;
} else {
for (LoopVariable = 0 ; LoopVariable < ShellCommandInstance && !ShellFileHandleEof(FileHandle);) {
if (StreamingUnicode) {
TempLine = ParseReturnStdInLine (FileHandle);
} else {
TempLine = ShellFileHandleReturnLine (FileHandle, &Ascii);
}
if ((TempLine == NULL) || (*TempLine == CHAR_NULL && StreamingUnicode)) {
break;
}
//
// Search for "ShellCommand," in the file to start the SFO table
// for a given ShellCommand. The UEFI Shell spec does not specify
// a space after the comma.
//
if (StrStr (TempLine, L"ShellCommand,") == TempLine) {
LoopVariable++;
}
SHELL_FREE_NON_NULL(TempLine);
}
if (LoopVariable == ShellCommandInstance) {
LoopVariable = 0;
while(1) {
if (StreamingUnicode) {
TempLine = ParseReturnStdInLine (FileHandle);
} else {
TempLine = ShellFileHandleReturnLine (FileHandle, &Ascii);
}
if (TempLine == NULL
|| *TempLine == CHAR_NULL
|| StrStr (TempLine, L"ShellCommand,") == TempLine) {
SHELL_FREE_NON_NULL(TempLine);
break;
}
if (StrStr (TempLine, TableName) == TempLine) {
LoopVariable++;
if (LoopVariable == TableNameInstance
|| (TableNameInstance == (UINTN)-1)) {
for (ColumnLoop = 1, ColumnPointer = TempLine; ColumnLoop < ColumnIndex && ColumnPointer != NULL && *ColumnPointer != CHAR_NULL; ColumnLoop++) {
ColumnPointer = StrStr (ColumnPointer, L",\"");
if (ColumnPointer != NULL && *ColumnPointer != CHAR_NULL){
ColumnPointer++;
}
}
if (ColumnLoop == ColumnIndex) {
if (ColumnPointer == NULL) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_NO_VALUE), gShellLevel2HiiHandle, L"parse", L"Column Index");
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
TempSpot = StrStr (ColumnPointer, L",\"");
if (TempSpot != NULL) {
*TempSpot = CHAR_NULL;
}
while (ColumnPointer != NULL && *ColumnPointer != CHAR_NULL && ColumnPointer[0] == L' '){
ColumnPointer++;
}
if (ColumnPointer != NULL && *ColumnPointer != CHAR_NULL && ColumnPointer[0] == L'\"'){
ColumnPointer++;
}
if (ColumnPointer != NULL && *ColumnPointer != CHAR_NULL && ColumnPointer[StrLen (ColumnPointer) - 1] == L'\"'){
ColumnPointer[StrLen (ColumnPointer) - 1] = CHAR_NULL;
}
SfoString = HandleStringWithEscapeCharForParse (ColumnPointer);
if (SfoString != NULL) {
ShellPrintEx (-1, -1, L"%s\r\n", SfoString);
SHELL_FREE_NON_NULL (SfoString);
}
}
}
}
}
SHELL_FREE_NON_NULL(TempLine);
}
}
}
return (ShellStatus);
}
STATIC CONST SHELL_PARAM_ITEM ParamList[] = {
{L"-i", TypeValue},
{L"-s", TypeValue},
{NULL, TypeMax}
};
/**
Function for 'parse' command.
@param[in] ImageHandle Handle to the Image (NULL if Internal).
@param[in] SystemTable Pointer to the System Table (NULL if Internal).
**/
SHELL_STATUS
EFIAPI
ShellCommandRunParse (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
LIST_ENTRY *Package;
CHAR16 *ProblemParam;
CONST CHAR16 *FileName;
CONST CHAR16 *TableName;
CONST CHAR16 *ColumnString;
SHELL_STATUS ShellStatus;
UINTN ShellCommandInstance;
UINTN TableNameInstance;
BOOLEAN StreamingUnicode;
ShellStatus = SHELL_SUCCESS;
ProblemParam = NULL;
StreamingUnicode = FALSE;
//
// initialize the shell lib (we must be in non-auto-init...)
//
Status = ShellInitialize();
ASSERT_EFI_ERROR(Status);
//
// parse the command line
//
Status = ShellCommandLineParseEx (ParamList, &Package, &ProblemParam, TRUE, FALSE);
if (EFI_ERROR(Status)) {
if (Status == EFI_VOLUME_CORRUPTED && ProblemParam != NULL) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_PROBLEM), gShellLevel2HiiHandle, L"parse", ProblemParam);
FreePool(ProblemParam);
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
ASSERT(FALSE);
}
} else {
StreamingUnicode = IsStdInDataAvailable ();
if ((!StreamingUnicode && (ShellCommandLineGetCount(Package) < 4)) ||
(ShellCommandLineGetCount(Package) < 3)) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_TOO_FEW), gShellLevel2HiiHandle, L"parse");
ShellStatus = SHELL_INVALID_PARAMETER;
} else if ((StreamingUnicode && (ShellCommandLineGetCount(Package) > 3)) ||
(ShellCommandLineGetCount(Package) > 4)) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_TOO_MANY), gShellLevel2HiiHandle, L"parse");
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
if (StreamingUnicode) {
FileName = L">i";
TableName = ShellCommandLineGetRawValue(Package, 1);
ColumnString = ShellCommandLineGetRawValue(Package, 2);
} else {
FileName = ShellCommandLineGetRawValue(Package, 1);
TableName = ShellCommandLineGetRawValue(Package, 2);
ColumnString = ShellCommandLineGetRawValue(Package, 3);
}
if (ShellCommandLineGetValue(Package, L"-i") == NULL) {
TableNameInstance = (UINTN)-1;
} else {
TableNameInstance = ShellStrToUintn(ShellCommandLineGetValue(Package, L"-i"));
}
if (ShellCommandLineGetValue(Package, L"-s") == NULL) {
ShellCommandInstance = 1;
} else {
ShellCommandInstance = ShellStrToUintn(ShellCommandLineGetValue(Package, L"-s"));
}
ShellStatus = PerformParsing(FileName, TableName, ShellStrToUintn(ColumnString), TableNameInstance, ShellCommandInstance, StreamingUnicode);
}
}
//
// free the command line package
//
ShellCommandLineFreeVarList (Package);
return (ShellStatus);
}