/** @file
  IA-32/x64 AsmEnablePaging64()

  Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php.

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/




#include "BaseLibInternals.h"

/**
  Enables the 64-bit paging mode on the CPU.

  Enables the 64-bit paging mode on the CPU. CR0, CR3, CR4, and the page tables
  must be properly initialized prior to calling this service. This function
  assumes the current execution mode is 32-bit protected mode with flat
  descriptors. This function is only available on IA-32. After the 64-bit
  paging mode is enabled, control is transferred to the function specified by
  EntryPoint using the new stack specified by NewStack and passing in the
  parameters specified by Context1 and Context2. Context1 and Context2 are
  optional and may be 0. The function EntryPoint must never return.

  If the current execution mode is not 32-bit protected mode with flat
  descriptors, then ASSERT().
  If EntryPoint is 0, then ASSERT().
  If NewStack is 0, then ASSERT().

  @param  Cs          The 16-bit selector to load in the CS before EntryPoint
                      is called. The descriptor in the GDT that this selector
                      references must be setup for long mode.
  @param  EntryPoint  The 64-bit virtual address of the function to call with
                      the new stack after paging is enabled.
  @param  Context1    The 64-bit virtual address of the context to pass into
                      the EntryPoint function as the first parameter after
                      paging is enabled.
  @param  Context2    The 64-bit virtual address of the context to pass into
                      the EntryPoint function as the second parameter after
                      paging is enabled.
  @param  NewStack    The 64-bit virtual address of the new stack to use for
                      the EntryPoint function after paging is enabled.

**/
VOID
EFIAPI
AsmEnablePaging64 (
  IN      UINT16                    Cs,
  IN      UINT64                    EntryPoint,
  IN      UINT64                    Context1,  OPTIONAL
  IN      UINT64                    Context2,  OPTIONAL
  IN      UINT64                    NewStack
  )
{
  ASSERT (EntryPoint != 0);
  ASSERT (NewStack != 0);
  InternalX86EnablePaging64 (Cs, EntryPoint, Context1, Context2, NewStack);
}