PeCoffLib.h - Android社区 - https://www.androidos.net.cn/

/** @file
Provides services to load and relocate a PE/COFF image.

The PE/COFF Loader Library abstracts the implementation of a PE/COFF loader for
IA-32, x86, IPF, and EBC processor types. The library functions are memory-based
and can be ported easily to any environment.

Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef __BASE_PE_COFF_LIB_H__
#define __BASE_PE_COFF_LIB_H__

#include <IndustryStandard/PeImage.h>
//
// Return status codes from the PE/COFF Loader services
//
#define IMAGE_ERROR_SUCCESS 0
#define IMAGE_ERROR_IMAGE_READ 1
#define IMAGE_ERROR_INVALID_PE_HEADER_SIGNATURE 2
#define IMAGE_ERROR_INVALID_MACHINE_TYPE 3
#define IMAGE_ERROR_INVALID_SUBSYSTEM 4
#define IMAGE_ERROR_INVALID_IMAGE_ADDRESS 5
#define IMAGE_ERROR_INVALID_IMAGE_SIZE 6
#define IMAGE_ERROR_INVALID_SECTION_ALIGNMENT 7
#define IMAGE_ERROR_SECTION_NOT_LOADED 8
#define IMAGE_ERROR_FAILED_RELOCATION 9
#define IMAGE_ERROR_FAILED_ICACHE_FLUSH 10
#define IMAGE_ERROR_UNSUPPORTED 11

/**
Reads contents of a PE/COFF image.

A function of this type reads contents of the PE/COFF image specified by FileHandle. The read
operation copies ReadSize bytes from the PE/COFF image starting at byte offset FileOffset into
the buffer specified by Buffer. The size of the buffer actually read is returned in ReadSize.
If FileOffset specifies an offset past the end of the PE/COFF image, a ReadSize of 0 is returned.
A function of this type must be registered in the ImageRead field of a PE_COFF_LOADER_IMAGE_CONTEXT
structure for the PE/COFF Loader Library service to function correctly. This function abstracts access
to a PE/COFF image so it can be implemented in an environment specific manner. For example, SEC and PEI
environments may access memory directly to read the contents of a PE/COFF image, and DXE or UEFI
environments may require protocol services to read the contents of PE/COFF image
stored on FLASH, disk, or network devices.

If FileHandle is not a valid handle, then ASSERT().
If ReadSize is NULL, then ASSERT().
If Buffer is NULL, then ASSERT().

@param FileHandle Pointer to the file handle to read the PE/COFF image.
@param FileOffset Offset into the PE/COFF image to begin the read operation.
@param ReadSize On input, the size in bytes of the requested read operation.
On output, the number of bytes actually read.
@param Buffer Output buffer that contains the data read from the PE/COFF image.

@retval RETURN_SUCCESS The specified portion of the PE/COFF image was
read and the size return in ReadSize.
@retval RETURN_DEVICE_ERROR The specified portion of the PE/COFF image
could not be read due to a device error.

**/
typedef
RETURN_STATUS
(EFIAPI *PE_COFF_LOADER_READ_FILE)(
IN VOID *FileHandle,
IN UINTN FileOffset,
IN OUT UINTN *ReadSize,
OUT VOID *Buffer
);

///
/// The context structure used while PE/COFF image is being loaded and relocated.
///
typedef struct {
///
/// Set by PeCoffLoaderGetImageInfo() to the ImageBase in the PE/COFF header.
///
PHYSICAL_ADDRESS ImageAddress;
///
/// Set by PeCoffLoaderGetImageInfo() to the SizeOfImage in the PE/COFF header.
/// Image size includes the size of Debug Entry if it is present.
///
UINT64 ImageSize;
///
/// Is set to zero by PeCoffLoaderGetImageInfo(). If DestinationAddress is non-zero,
/// PeCoffLoaderRelocateImage() will relocate the image using this base address.
/// If the DestinationAddress is zero, the ImageAddress will be used as the base
/// address of relocation.
///
PHYSICAL_ADDRESS DestinationAddress;
///
/// PeCoffLoaderLoadImage() sets EntryPoint to to the entry point of the PE/COFF image.
///
PHYSICAL_ADDRESS EntryPoint;
///
/// Passed in by the caller to PeCoffLoaderGetImageInfo() and PeCoffLoaderLoadImage()
/// to abstract accessing the image from the library.
///
PE_COFF_LOADER_READ_FILE ImageRead;
///
/// Used as the FileHandle passed into the ImageRead function when it's called.
///
VOID *Handle;
///
/// Caller allocated buffer of size FixupDataSize that can be optionally allocated
/// prior to calling PeCoffLoaderRelocateImage().
/// This buffer is filled with the information used to fix up the image.
/// The fixups have been applied to the image and this entry is just for information.
///
VOID *FixupData;
///
/// Set by PeCoffLoaderGetImageInfo() to the Section Alignment in the PE/COFF header.
/// If the image is a TE image, then this field is set to 0.
///
UINT32 SectionAlignment;
///
/// Set by PeCoffLoaderGetImageInfo() to offset to the PE/COFF header.
/// If the PE/COFF image does not start with a DOS header, this value is zero.
/// Otherwise, it's the offset to the PE/COFF header.
///
UINT32 PeCoffHeaderOffset;
///
/// Set by PeCoffLoaderGetImageInfo() to the Relative Virtual Address of the debug directory,
/// if it exists in the image
///
UINT32 DebugDirectoryEntryRva;
///
/// Set by PeCoffLoaderLoadImage() to CodeView area of the PE/COFF Debug directory.
///
VOID *CodeView;
///
/// Set by PeCoffLoaderLoadImage() to point to the PDB entry contained in the CodeView area.
/// The PdbPointer points to the filename of the PDB file used for source-level debug of
/// the image by a debugger.
///
CHAR8 *PdbPointer;
///
/// Is set by PeCoffLoaderGetImageInfo() to the Section Alignment in the PE/COFF header.
///
UINTN SizeOfHeaders;
///
/// Not used by this library class. Other library classes that layer on top of this library
/// class fill in this value as part of their GetImageInfo call.
/// This allows the caller of the library to know what type of memory needs to be allocated
/// to load and relocate the image.
///
UINT32 ImageCodeMemoryType;
///
/// Not used by this library class. Other library classes that layer on top of this library
/// class fill in this value as part of their GetImageInfo call.
/// This allows the caller of the library to know what type of memory needs to be allocated
/// to load and relocate the image.
///
UINT32 ImageDataMemoryType;
///
/// Set by any of the library functions if they encounter an error.
///
UINT32 ImageError;
///
/// Set by PeCoffLoaderLoadImage() to indicate the size of FixupData that the caller must
/// allocate before calling PeCoffLoaderRelocateImage().
///
UINTN FixupDataSize;
///
/// Set by PeCoffLoaderGetImageInfo() to the machine type stored in the PE/COFF header.
///
UINT16 Machine;
///
/// Set by PeCoffLoaderGetImageInfo() to the subsystem type stored in the PE/COFF header.
///
UINT16 ImageType;
///
/// Set by PeCoffLoaderGetImageInfo() to TRUE if the PE/COFF image does not contain
/// relocation information.
///
BOOLEAN RelocationsStripped;
///
/// Set by PeCoffLoaderGetImageInfo() to TRUE if the image is a TE image.
/// For a definition of the TE Image format, see the Platform Initialization Pre-EFI
/// Initialization Core Interface Specification.
///
BOOLEAN IsTeImage;
///
/// Set by PeCoffLoaderLoadImage() to the HII resource offset
/// if the image contains a custom PE/COFF resource with the type 'HII'.
/// Otherwise, the entry remains to be 0.
///
PHYSICAL_ADDRESS HiiResourceData;
///
/// Private storage for implementation specific data.
///
UINT64 Context;
} PE_COFF_LOADER_IMAGE_CONTEXT;

/**
Retrieves information about a PE/COFF image.

Computes the PeCoffHeaderOffset, IsTeImage, ImageType, ImageAddress, ImageSize,
DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders, and
DebugDirectoryEntryRva fields of the ImageContext structure.
If ImageContext is NULL, then return RETURN_INVALID_PARAMETER.
If the PE/COFF image accessed through the ImageRead service in the ImageContext
structure is not a supported PE/COFF image type, then return RETURN_UNSUPPORTED.
If any errors occur while computing the fields of ImageContext,
then the error status is returned in the ImageError field of ImageContext.
If the image is a TE image, then SectionAlignment is set to 0.
The ImageRead and Handle fields of ImageContext structure must be valid prior
to invoking this service.

@param ImageContext The pointer to the image context structure that
describes the PE/COFF image that needs to be
examined by this function.

@retval RETURN_SUCCESS The information on the PE/COFF image was collected.
@retval RETURN_INVALID_PARAMETER ImageContext is NULL.
@retval RETURN_UNSUPPORTED The PE/COFF image is not supported.

**/
RETURN_STATUS
EFIAPI
PeCoffLoaderGetImageInfo (
IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
);

/**
Applies relocation fixups to a PE/COFF image that was loaded with PeCoffLoaderLoadImage().

If the DestinationAddress field of ImageContext is 0, then use the ImageAddress field of
ImageContext as the relocation base address. Otherwise, use the DestinationAddress field
of ImageContext as the relocation base address. The caller must allocate the relocation
fixup log buffer and fill in the FixupData field of ImageContext prior to calling this function.

The ImageRead, Handle, PeCoffHeaderOffset, IsTeImage, Machine, ImageType, ImageAddress,
ImageSize, DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders,
DebugDirectoryEntryRva, EntryPoint, FixupDataSize, CodeView, PdbPointer, and FixupData of
the ImageContext structure must be valid prior to invoking this service.

If ImageContext is NULL, then ASSERT().

Note that if the platform does not maintain coherency between the instruction cache(s) and the data
cache(s) in hardware, then the caller is responsible for performing cache maintenance operations
prior to transferring control to a PE/COFF image that is loaded using this library.

@param ImageContext The pointer to the image context structure that describes the PE/COFF
image that is being relocated.

@retval RETURN_SUCCESS The PE/COFF image was relocated.
Extended status information is in the ImageError field of ImageContext.
@retval RETURN_LOAD_ERROR The image in not a valid PE/COFF image.
Extended status information is in the ImageError field of ImageContext.
@retval RETURN_UNSUPPORTED A relocation record type is not supported.
Extended status information is in the ImageError field of ImageContext.

**/
RETURN_STATUS
EFIAPI
PeCoffLoaderRelocateImage (
IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
);

/**
Loads a PE/COFF image into memory.

Loads the PE/COFF image accessed through the ImageRead service of ImageContext into the buffer
specified by the ImageAddress and ImageSize fields of ImageContext. The caller must allocate
the load buffer and fill in the ImageAddress and ImageSize fields prior to calling this function.
The EntryPoint, FixupDataSize, CodeView, PdbPointer and HiiResourceData fields of ImageContext are computed.
The ImageRead, Handle, PeCoffHeaderOffset, IsTeImage, Machine, ImageType, ImageAddress, ImageSize,
DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders, and DebugDirectoryEntryRva
fields of the ImageContext structure must be valid prior to invoking this service.

If ImageContext is NULL, then ASSERT().

@param ImageContext The pointer to the image context structure that describes the PE/COFF
image that is being loaded.

@retval RETURN_SUCCESS The PE/COFF image was loaded into the buffer specified by
the ImageAddress and ImageSize fields of ImageContext.
Extended status information is in the ImageError field of ImageContext.
@retval RETURN_BUFFER_TOO_SMALL The caller did not provide a large enough buffer.
Extended status information is in the ImageError field of ImageContext.
@retval RETURN_LOAD_ERROR The PE/COFF image is an EFI Runtime image with no relocations.
Extended status information is in the ImageError field of ImageContext.
@retval RETURN_INVALID_PARAMETER The image address is invalid.
Extended status information is in the ImageError field of ImageContext.

**/
RETURN_STATUS
EFIAPI
PeCoffLoaderLoadImage (
IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
);

/**
Reads contents of a PE/COFF image from a buffer in system memory.

This is the default implementation of a PE_COFF_LOADER_READ_FILE function
that assumes FileHandle pointer to the beginning of a PE/COFF image.
This function reads contents of the PE/COFF image that starts at the system memory
address specified by FileHandle. The read operation copies ReadSize bytes from the
PE/COFF image starting at byte offset FileOffset into the buffer specified by Buffer.
The size of the buffer actually read is returned in ReadSize.

If FileHandle is NULL, then ASSERT().
If ReadSize is NULL, then ASSERT().
If Buffer is NULL, then ASSERT().

@param FileHandle The pointer to base of the input stream
@param FileOffset Offset into the PE/COFF image to begin the read operation.
@param ReadSize On input, the size in bytes of the requested read operation.
On output, the number of bytes actually read.
@param Buffer Output buffer that contains the data read from the PE/COFF image.

@retval RETURN_SUCCESS The data is read from FileOffset from the Handle into
the buffer.
**/
RETURN_STATUS
EFIAPI
PeCoffLoaderImageReadFromMemory (
IN VOID *FileHandle,
IN UINTN FileOffset,
IN OUT UINTN *ReadSize,
OUT VOID *Buffer
);

/**
Reapply fixups on a fixed up PE32/PE32+ image to allow virtual calling at EFI
runtime.

This function reapplies relocation fixups to the PE/COFF image specified by ImageBase
and ImageSize so the image will execute correctly when the PE/COFF image is mapped
to the address specified by VirtualImageBase. RelocationData must be identical
to the FiuxupData buffer from the PE_COFF_LOADER_IMAGE_CONTEXT structure
after this PE/COFF image was relocated with PeCoffLoaderRelocateImage().

@param ImageBase The base address of a PE/COFF image that has been loaded
and relocated into system memory.
@param VirtImageBase The request virtual address that the PE/COFF image is to
be fixed up for.
@param ImageSize The size, in bytes, of the PE/COFF image.
@param RelocationData A pointer to the relocation data that was collected when the PE/COFF
image was relocated using PeCoffLoaderRelocateImage().

**/
VOID
EFIAPI
PeCoffLoaderRelocateImageForRuntime (
IN PHYSICAL_ADDRESS ImageBase,
IN PHYSICAL_ADDRESS VirtImageBase,
IN UINTN ImageSize,
IN VOID *RelocationData
);

/**
Unloads a loaded PE/COFF image from memory and releases its taken resource.
Releases any environment specific resources that were allocated when the image
specified by ImageContext was loaded using PeCoffLoaderLoadImage().

For NT32 emulator, the PE/COFF image loaded by system needs to release.
For real platform, the PE/COFF image loaded by Core doesn't needs to be unloaded,
this function can simply return RETURN_SUCCESS.

If ImageContext is NULL, then ASSERT().

@param ImageContext Pointer to the image context structure that describes the PE/COFF
image to be unloaded.

@retval RETURN_SUCCESS The PE/COFF image was unloaded successfully.
**/
RETURN_STATUS
EFIAPI
PeCoffLoaderUnloadImage (
IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
);
#endif