/** @file
Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "DxeIpl.h"
//
// Module Globals used in the DXE to PEI hand off
// These must be module globals, so the stack can be switched
//
CONST EFI_DXE_IPL_PPI mDxeIplPpi = {
DxeLoadCore
};
CONST EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI mCustomGuidedSectionExtractionPpi = {
CustomGuidedSectionExtract
};
CONST EFI_PEI_DECOMPRESS_PPI mDecompressPpi = {
Decompress
};
CONST EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {
{
EFI_PEI_PPI_DESCRIPTOR_PPI,
&gEfiDxeIplPpiGuid,
(VOID *) &mDxeIplPpi
},
{
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
&gEfiPeiDecompressPpiGuid,
(VOID *) &mDecompressPpi
}
};
CONST EFI_PEI_PPI_DESCRIPTOR gEndOfPeiSignalPpi = {
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
&gEfiEndOfPeiSignalPpiGuid,
NULL
};
/**
Entry point of DXE IPL PEIM.
This function installs DXE IPL PPI and Decompress PPI. It also reloads
itself to memory on non-S3 resume boot path.
@param[in] FileHandle Handle of the file being invoked.
@param[in] PeiServices Describes the list of possible PEI Services.
@retval EFI_SUCESS The entry point of DXE IPL PEIM executes successfully.
@retval Others Some error occurs during the execution of this function.
**/
EFI_STATUS
EFIAPI
PeimInitializeDxeIpl (
IN EFI_PEI_FILE_HANDLE FileHandle,
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
EFI_STATUS Status;
EFI_GUID *ExtractHandlerGuidTable;
UINTN ExtractHandlerNumber;
EFI_PEI_PPI_DESCRIPTOR *GuidPpi;
//
// Get custom extract guided section method guid list
//
ExtractHandlerNumber = ExtractGuidedSectionGetGuidList (&ExtractHandlerGuidTable);
//
// Install custom extraction guid PPI
//
if (ExtractHandlerNumber > 0) {
GuidPpi = (EFI_PEI_PPI_DESCRIPTOR *) AllocatePool (ExtractHandlerNumber * sizeof (EFI_PEI_PPI_DESCRIPTOR));
ASSERT (GuidPpi != NULL);
while (ExtractHandlerNumber-- > 0) {
GuidPpi->Flags = EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST;
GuidPpi->Ppi = (VOID *) &mCustomGuidedSectionExtractionPpi;
GuidPpi->Guid = &ExtractHandlerGuidTable[ExtractHandlerNumber];
Status = PeiServicesInstallPpi (GuidPpi++);
ASSERT_EFI_ERROR(Status);
}
}
//
// Install DxeIpl and Decompress PPIs.
//
Status = PeiServicesInstallPpi (mPpiList);
ASSERT_EFI_ERROR(Status);
return Status;
}
/**
The ExtractSection() function processes the input section and
returns a pointer to the section contents. If the section being
extracted does not require processing (if the section
GuidedSectionHeader.Attributes has the
EFI_GUIDED_SECTION_PROCESSING_REQUIRED field cleared), then
OutputBuffer is just updated to point to the start of the
section's contents. Otherwise, *Buffer must be allocated
from PEI permanent memory.
@param[in] This Indicates the
EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI instance.
Buffer containing the input GUIDed section to be
processed. OutputBuffer OutputBuffer is
allocated from PEI permanent memory and contains
the new section stream.
@param[in] InputSection A pointer to the input buffer, which contains
the input section to be processed.
@param[out] OutputBuffer A pointer to a caller-allocated buffer, whose
size is specified by the contents of OutputSize.
@param[out] OutputSize A pointer to a caller-allocated
UINTN in which the size of *OutputBuffer
allocation is stored. If the function
returns anything other than EFI_SUCCESS,
the value of OutputSize is undefined.
@param[out] AuthenticationStatus A pointer to a caller-allocated
UINT32 that indicates the
authentication status of the
output buffer. If the input
section's GuidedSectionHeader.
Attributes field has the
EFI_GUIDED_SECTION_AUTH_STATUS_VALID
bit as clear,
AuthenticationStatus must return
zero. These bits reflect the
status of the extraction
operation. If the function
returns anything other than
EFI_SUCCESS, the value of
AuthenticationStatus is
undefined.
@retval EFI_SUCCESS The InputSection was
successfully processed and the
section contents were returned.
@retval EFI_OUT_OF_RESOURCES The system has insufficient
resources to process the request.
@retval EFI_INVALID_PARAMETER The GUID in InputSection does
not match this instance of the
GUIDed Section Extraction PPI.
**/
EFI_STATUS
EFIAPI
CustomGuidedSectionExtract (
IN CONST EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI *This,
IN CONST VOID *InputSection,
OUT VOID **OutputBuffer,
OUT UINTN *OutputSize,
OUT UINT32 *AuthenticationStatus
)
{
EFI_STATUS Status;
UINT8 *ScratchBuffer;
UINT32 ScratchBufferSize;
UINT32 OutputBufferSize;
UINT16 SectionAttribute;
//
// Init local variable
//
ScratchBuffer = NULL;
//
// Call GetInfo to get the size and attribute of input guided section data.
//
Status = ExtractGuidedSectionGetInfo (
InputSection,
&OutputBufferSize,
&ScratchBufferSize,
&SectionAttribute
);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "GetInfo from guided section Failed - %r\n", Status));
return Status;
}
if (ScratchBufferSize != 0) {
//
// Allocate scratch buffer
//
ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));
if (ScratchBuffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
}
if (((SectionAttribute & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) != 0) && OutputBufferSize > 0) {
//
// Allocate output buffer
//
*OutputBuffer = AllocatePages (EFI_SIZE_TO_PAGES (OutputBufferSize) + 1);
if (*OutputBuffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
DEBUG ((DEBUG_INFO, "Customized Guided section Memory Size required is 0x%x and address is 0x%p\n", OutputBufferSize, *OutputBuffer));
//
// *OutputBuffer still is one section. Adjust *OutputBuffer offset,
// skip EFI section header to make section data at page alignment.
//
*OutputBuffer = (VOID *)((UINT8 *) *OutputBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER));
}
Status = ExtractGuidedSectionDecode (
InputSection,
OutputBuffer,
ScratchBuffer,
AuthenticationStatus
);
if (EFI_ERROR (Status)) {
//
// Decode failed
//
DEBUG ((DEBUG_ERROR, "Extract guided section Failed - %r\n", Status));
return Status;
}
*OutputSize = (UINTN) OutputBufferSize;
return EFI_SUCCESS;
}
/**
Decompresses a section to the output buffer.
This function looks up the compression type field in the input section and
applies the appropriate compression algorithm to compress the section to a
callee allocated buffer.
@param[in] This Points to this instance of the
EFI_PEI_DECOMPRESS_PEI PPI.
@param[in] CompressionSection Points to the compressed section.
@param[out] OutputBuffer Holds the returned pointer to the decompressed
sections.
@param[out] OutputSize Holds the returned size of the decompress
section streams.
@retval EFI_SUCCESS The section was decompressed successfully.
OutputBuffer contains the resulting data and
OutputSize contains the resulting size.
**/
EFI_STATUS
EFIAPI
Decompress (
IN CONST EFI_PEI_DECOMPRESS_PPI *This,
IN CONST EFI_COMPRESSION_SECTION *CompressionSection,
OUT VOID **OutputBuffer,
OUT UINTN *OutputSize
)
{
EFI_STATUS Status;
UINT8 *DstBuffer;
UINT8 *ScratchBuffer;
UINT32 DstBufferSize;
UINT32 ScratchBufferSize;
VOID *CompressionSource;
UINT32 CompressionSourceSize;
UINT32 UncompressedLength;
UINT8 CompressionType;
if (CompressionSection->CommonHeader.Type != EFI_SECTION_COMPRESSION) {
ASSERT (FALSE);
return EFI_INVALID_PARAMETER;
}
if (IS_SECTION2 (CompressionSection)) {
CompressionSource = (VOID *) ((UINT8 *) CompressionSection + sizeof (EFI_COMPRESSION_SECTION2));
CompressionSourceSize = (UINT32) (SECTION2_SIZE (CompressionSection) - sizeof (EFI_COMPRESSION_SECTION2));
UncompressedLength = ((EFI_COMPRESSION_SECTION2 *) CompressionSection)->UncompressedLength;
CompressionType = ((EFI_COMPRESSION_SECTION2 *) CompressionSection)->CompressionType;
} else {
CompressionSource = (VOID *) ((UINT8 *) CompressionSection + sizeof (EFI_COMPRESSION_SECTION));
CompressionSourceSize = (UINT32) (SECTION_SIZE (CompressionSection) - sizeof (EFI_COMPRESSION_SECTION));
UncompressedLength = CompressionSection->UncompressedLength;
CompressionType = CompressionSection->CompressionType;
}
//
// This is a compression set, expand it
//
switch (CompressionType) {
case EFI_STANDARD_COMPRESSION:
//
// Load EFI standard compression.
// For compressed data, decompress them to destination buffer.
//
Status = UefiDecompressGetInfo (
CompressionSource,
CompressionSourceSize,
&DstBufferSize,
&ScratchBufferSize
);
if (EFI_ERROR (Status)) {
//
// GetInfo failed
//
DEBUG ((DEBUG_ERROR, "Decompress GetInfo Failed - %r\n", Status));
return EFI_NOT_FOUND;
}
//
// Allocate scratch buffer
//
ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));
if (ScratchBuffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Allocate destination buffer, extra one page for adjustment
//
DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize) + 1);
if (DstBuffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// DstBuffer still is one section. Adjust DstBuffer offset, skip EFI section header
// to make section data at page alignment.
//
DstBuffer = DstBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER);
//
// Call decompress function
//
Status = UefiDecompress (
CompressionSource,
DstBuffer,
ScratchBuffer
);
if (EFI_ERROR (Status)) {
//
// Decompress failed
//
DEBUG ((DEBUG_ERROR, "Decompress Failed - %r\n", Status));
return EFI_NOT_FOUND;
}
break;
case EFI_NOT_COMPRESSED:
//
// Allocate destination buffer
//
DstBufferSize = UncompressedLength;
DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize) + 1);
if (DstBuffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Adjust DstBuffer offset, skip EFI section header
// to make section data at page alignment.
//
DstBuffer = DstBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER);
//
// stream is not actually compressed, just encapsulated. So just copy it.
//
CopyMem (DstBuffer, CompressionSource, DstBufferSize);
break;
default:
//
// Don't support other unknown compression type.
//
ASSERT (FALSE);
return EFI_NOT_FOUND;
}
*OutputSize = DstBufferSize;
*OutputBuffer = DstBuffer;
return EFI_SUCCESS;
}
/**
Main entry point to last PEIM.
This function finds DXE Core in the firmware volume and transfer the control to
DXE core.
@param[in] This Entry point for DXE IPL PPI.
@param[in] PeiServices General purpose services available to every PEIM.
@param[in] HobList Address to the Pei HOB list.
@return EFI_SUCCESS DXE core was successfully loaded.
@return EFI_OUT_OF_RESOURCES There are not enough resources to load DXE core.
**/
EFI_STATUS
EFIAPI
DxeLoadCore (
IN CONST EFI_DXE_IPL_PPI *This,
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_HOB_POINTERS HobList
)
{
EFI_STATUS Status;
DEBUG ((DEBUG_INFO | DEBUG_INIT, "FSP HOB is located at 0x%08X\n", HobList));
//
// End of PEI phase signal
//
Status = PeiServicesInstallPpi (&gEndOfPeiSignalPpi);
ASSERT_EFI_ERROR (Status);
//
// Give control back to BootLoader after FspInit
//
DEBUG ((DEBUG_INFO | DEBUG_INIT, "FSP is waiting for NOTIFY\n"));
FspInitDone ();
//
// BootLoader called FSP again through NotifyPhase
//
FspWaitForNotify ();
//
// Give control back to the boot loader framework caller
//
DEBUG ((DEBUG_INFO | DEBUG_INIT, "============= PEIM FSP is Completed =============\n\n"));
SetFspApiReturnStatus(EFI_SUCCESS);
SetFspMeasurePoint (FSP_PERF_ID_API_NOTIFY_RDYBOOT_EXIT);
Pei2LoaderSwitchStack();
//
// Should not come here
//
while (TRUE) {
DEBUG ((DEBUG_ERROR, "No FSP API should be called after FSP is DONE!\n"));
SetFspApiReturnStatus(EFI_UNSUPPORTED);
Pei2LoaderSwitchStack();
}
return EFI_SUCCESS;
}