/*******************************************************************************
Copyright (C) 2016 Marvell International Ltd.
Marvell BSD License Option
If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File under the following licensing terms.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of Marvell nor the names of its contributors may be
used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#include <Uefi.h>
#include <ShellBase.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/ShellCommandLib.h>
#include <Library/ShellLib.h>
#include <Library/UefiLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/PrintLib.h>
#include <Library/ShellCEntryLib.h>
#include <Library/HiiLib.h>
#include <Library/FileHandleLib.h>
#include <Protocol/Spi.h>
#include <Protocol/SpiFlash.h>
MARVELL_SPI_FLASH_PROTOCOL *SpiFlashProtocol;
MARVELL_SPI_MASTER_PROTOCOL *SpiMasterProtocol;
CONST CHAR16 gShellSpiFlashFileName[] = L"ShellCommand";
EFI_HANDLE gShellSfHiiHandle = NULL;
BOOLEAN InitFlag = 1;
STATIC CONST SHELL_PARAM_ITEM ParamList[] = {
{L"read", TypeFlag},
{L"readfile", TypeFlag},
{L"write", TypeFlag},
{L"writefile", TypeFlag},
{L"erase", TypeFlag},
{L"update", TypeFlag},
{L"updatefile", TypeFlag},
{L"probe", TypeFlag},
{L"help", TypeFlag},
{NULL , TypeMax}
};
typedef enum {
PROBE = 1,
READ = 2,
READ_FILE = 4,
WRITE = 8,
WRITE_FILE = 16,
ERASE = 32,
UPDATE = 64,
UPDATE_FILE = 128,
} Flags;
/**
Return the file name of the help text file if not using HII.
@return The string pointer to the file name.
**/
CONST CHAR16*
EFIAPI
ShellCommandGetManFileNameSpiFlash (
VOID
)
{
return gShellSpiFlashFileName;
}
VOID
SfUsage (
VOID
)
{
Print (L"\nBasic SPI command\n"
"sf [probe | read | readfile | write | writefile | erase |"
"update | updatefile]"
"[<Address> | <FilePath>] <Offset> <Length>\n\n"
"Length - Number of bytes to send\n"
"Address - Address in RAM to store/load data\n"
"FilePath - Path to file to read/write data from/to\n"
"Offset - Offset from beggining of SPI flash to store/load data\n"
"Examples:\n"
"Check if there is response from SPI flash\n"
" sf probe\n"
"Read 32 bytes from 0xe00000 of SPI flash into RAM at address 0x100000\n"
" sf read 0x100000 0xe00000 32\n"
"Read 0x20 bytes from 0x200000 of SPI flash into RAM at address 0x300000\n"
" sf read 0x300000 0x200000 0x20\n"
"Erase 0x10000 bytes from offset 0x100000 of SPI flash\n"
" sf erase 0x100000 0x100000\n"
"Write 16 bytes from 0x200000 at RAM into SPI flash at address 0x4000000\n"
" sf write 0x200000 0x4000000 16\n"
"Update 100 bytes from 0x100000 at RAM in SPI flash at address 0xe00000\n"
" sf update 0x100000 0xe00000 100\n"
"Read 0x3000 bytes from 0x0 of SPI flash into file fs2:file.bin\n"
" sf readfile fs2:file.bin 0x0 0x3000 \n"
"Update data in SPI flash at 0x3000000 from file Linux.efi\n"
" sf updatefile Linux.efi 0x3000000\n"
);
}
STATIC
EFI_STATUS
OpenAndPrepareFile (
IN CHAR16 *FilePath,
SHELL_FILE_HANDLE *FileHandle
)
{
EFI_STATUS Status;
UINT64 OpenMode;
OpenMode = EFI_FILE_MODE_READ | EFI_FILE_MODE_WRITE | EFI_FILE_MODE_CREATE;
Status = ShellOpenFileByName (FilePath, FileHandle, OpenMode, 0);
if (EFI_ERROR (Status)) {
Print (L"sf: Cannot open file\n");
return Status;
}
Status = FileHandleSetPosition(*FileHandle, 0);
if (EFI_ERROR(Status)) {
Print (L"sf: Cannot set file position to first byte\n");
ShellCloseFile (FileHandle);
return Status;
}
return EFI_SUCCESS;
}
STATIC
EFI_STATUS
FlashProbe (
IN SPI_DEVICE *Slave
)
{
EFI_STATUS Status;
UINT8 IdBuffer[4];
UINT32 Id, RefId;
Id = PcdGet32 (PcdSpiFlashId);
IdBuffer[0] = CMD_READ_ID;
SpiFlashProtocol->ReadId (
Slave,
4,
IdBuffer
);
RefId = (IdBuffer[0] << 16) + (IdBuffer[1] << 8) + IdBuffer[2];
if (RefId == Id) {
Print (L"sf: Detected supported SPI flash with ID=%3x\n", RefId);
Status = SpiFlashProtocol->Init (SpiFlashProtocol, Slave);
if (EFI_ERROR(Status)) {
Print (L"sf: Cannot initialize flash device\n");
return SHELL_ABORTED;
}
InitFlag = 0;
return EFI_SUCCESS;
} else if (RefId != 0) {
Print (L"sf: Unsupported SPI flash detected with ID=%2x\n", RefId);
return SHELL_ABORTED;
}
Print (L"sf: No SPI flash detected");
return SHELL_ABORTED;
}
SHELL_STATUS
EFIAPI
ShellCommandRunSpiFlash (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
SPI_DEVICE *Slave;
LIST_ENTRY *CheckPackage;
EFI_PHYSICAL_ADDRESS Address = 0, Offset = 0;
SHELL_FILE_HANDLE FileHandle = NULL;
UINTN ByteCount, FileSize, I;
UINT8 *Buffer = NULL, *FileBuffer = NULL;
CHAR16 *ProblemParam, *FilePath;
CONST CHAR16 *AddressStr = NULL, *OffsetStr = NULL;
CONST CHAR16 *LengthStr = NULL, *FileStr = NULL;
BOOLEAN AddrFlag = FALSE, LengthFlag = TRUE, FileFlag = FALSE;
UINT8 Flag = 0, CheckFlag = 0;
Status = gBS->LocateProtocol (
&gMarvellSpiFlashProtocolGuid,
NULL,
(VOID **)&SpiFlashProtocol
);
if (EFI_ERROR(Status)) {
Print (L"sf: Cannot locate SpiFlash protocol\n");
return SHELL_ABORTED;
}
Status = gBS->LocateProtocol (
&gMarvellSpiMasterProtocolGuid,
NULL,
(VOID **)&SpiMasterProtocol
);
if (EFI_ERROR(Status)) {
Print (L"sf: Cannot locate SpiMaster protocol\n");
return SHELL_ABORTED;
}
// Parse Shell command line
Status = ShellInitialize ();
if (EFI_ERROR (Status)) {
Print (L"sf: Cannot initialize Shell\n");
ASSERT_EFI_ERROR (Status);
return SHELL_ABORTED;
}
Status = ShellCommandLineParse (ParamList, &CheckPackage, &ProblemParam, TRUE);
if (EFI_ERROR (Status)) {
Print (L"sf: Error while parsing command line\n");
return SHELL_ABORTED;
}
if (ShellCommandLineGetFlag (CheckPackage, L"help")) {
SfUsage();
return EFI_SUCCESS;
}
// Check flags provided by user
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"probe") << 0);
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"read") << 1);
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"readfile") << 2);
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"write") << 3);
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"writefile") << 4);
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"erase") << 5);
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"update") << 6);
Flag |= (ShellCommandLineGetFlag (CheckPackage, L"updatefile") << 7);
if (InitFlag && !(Flag & PROBE)) {
Print (L"Please run sf probe\n");
return EFI_SUCCESS;
}
CheckFlag = Flag;
for (I = 0; CheckFlag; CheckFlag >>= 1) {
I += CheckFlag & 1;
if (I > 1) {
Print (L"sf: Too many flags\n");
SfUsage();
return SHELL_ABORTED;
}
}
// Setup new spi device
Slave = SpiMasterProtocol->SetupDevice (SpiMasterProtocol, 0, 0);
if (Slave == NULL) {
Print(L"sf: Cannot allocate SPI device!\n");
return SHELL_ABORTED;
}
switch (Flag) {
case PROBE:
// Probe spi bus
Status = FlashProbe (Slave);
if (EFI_ERROR(Status)) {
// No supported spi flash detected
return SHELL_ABORTED;
} else {
return Status;
}
break;
// Fall through
case READ:
case WRITE:
case UPDATE:
AddressStr = ShellCommandLineGetRawValue (CheckPackage, 1);
OffsetStr = ShellCommandLineGetRawValue (CheckPackage, 2);
LengthStr = ShellCommandLineGetRawValue (CheckPackage, 3);
AddrFlag = TRUE;
break;
case ERASE:
OffsetStr = ShellCommandLineGetRawValue (CheckPackage, 1);
LengthStr = ShellCommandLineGetRawValue (CheckPackage, 2);
break;
case READ_FILE:
FileStr = ShellCommandLineGetRawValue (CheckPackage, 1);
OffsetStr = ShellCommandLineGetRawValue (CheckPackage, 2);
LengthStr = ShellCommandLineGetRawValue (CheckPackage, 3);
FileFlag = TRUE;
break;
case WRITE_FILE:
case UPDATE_FILE:
FileStr = ShellCommandLineGetRawValue (CheckPackage, 1);
OffsetStr = ShellCommandLineGetRawValue (CheckPackage, 2);
LengthFlag = FALSE;
FileFlag = TRUE;
break;
}
// Read address parameter
if ((AddressStr == NULL) & AddrFlag) {
Print (L"sf: No address parameter!\n");
return SHELL_ABORTED;
} else if (AddrFlag) {
Address = ShellHexStrToUintn (AddressStr);
if (Address == (UINTN)(-1)) {
Print (L"sf: Wrong address parameter\n");
return SHELL_ABORTED;
}
}
// Read offset parameter
if (OffsetStr == NULL) {
Print (L"sf: No offset Parameter!\n");
return SHELL_ABORTED;
} else {
Offset = ShellHexStrToUintn (OffsetStr);
if (Offset < 0) {
Print (L"sf: Wrong offset parameter: %s", OffsetStr);
return SHELL_ABORTED;
}
}
// Read length parameter
if ((LengthStr == NULL) & LengthFlag) {
Print (L"sf: No lenght parameter!\n");
return SHELL_ABORTED;
} else if (LengthFlag) {
ByteCount = ShellStrToUintn (LengthStr);
if (ByteCount < 0) {
Print (L"sf: Wrong length parameter %s!\n", LengthStr);
return SHELL_ABORTED;
}
}
if (FileFlag) {
// Read FilePath parameter
if (FileStr == NULL) {
Print (L"sf: No FilePath parameter!\n");
return SHELL_ABORTED;
} else {
FilePath = (CHAR16 *) FileStr;
Status = ShellIsFile (FilePath);
// When read file into flash, file doesn't have to exist
if (EFI_ERROR(Status && !(Flag & READ_FILE))) {
Print (L"sf: Wrong FilePath parameter!\n");
return SHELL_ABORTED;
}
}
Status = OpenAndPrepareFile (FilePath, &FileHandle);
if (EFI_ERROR(Status)) {
Print (L"sf: Error while preparing file\n");
return SHELL_ABORTED;
}
// Get file size in order to check correctness at the end of transfer
if (Flag & (WRITE_FILE | UPDATE_FILE)) {
Status = FileHandleGetSize (FileHandle, &FileSize);
if (EFI_ERROR (Status)) {
Print (L"sf: Cannot get file size\n");
}
ByteCount = (UINTN) FileSize;
}
FileBuffer = AllocateZeroPool ((UINTN) ByteCount);
if (FileBuffer == NULL) {
Print (L"sf: Cannot allocate memory\n");
goto Error_Close_File;
}
// Read file content and store it in FileBuffer
if (Flag & (WRITE_FILE | UPDATE_FILE)) {
Status = FileHandleRead (FileHandle, &ByteCount, FileBuffer);
if (EFI_ERROR (Status)) {
Print (L"sf: Read from file error\n");
goto Error_Free_Buffer;
} else if (ByteCount != (UINTN) FileSize) {
Print (L"sf: Not whole file read. Abort\n");
goto Error_Free_Buffer;
}
}
}
Buffer = (UINT8 *) Address;
if (FileFlag) {
Buffer = FileBuffer;
}
switch (Flag) {
case READ:
case READ_FILE:
Status = SpiFlashProtocol->Read (Slave, Offset, ByteCount, Buffer);
break;
case ERASE:
Status = SpiFlashProtocol->Erase (Slave, Offset, ByteCount);
break;
case WRITE:
case WRITE_FILE:
Status = SpiFlashProtocol->Write (Slave, Offset, ByteCount, Buffer);
break;
case UPDATE:
case UPDATE_FILE:
Status = SpiFlashProtocol->Update (Slave, Offset, ByteCount, Buffer);
break;
}
SpiMasterProtocol->FreeDevice(Slave);
if (EFI_ERROR (Status)) {
Print (L"sf: Error while performing spi transfer\n");
return SHELL_ABORTED;
}
switch (Flag) {
case ERASE:
Print (L"sf: %d bytes succesfully erased at offset 0x%x\n", ByteCount,
Offset);
break;
case WRITE:
case WRITE_FILE:
Print (L"sf: Write %d bytes at offset 0x%x\n", ByteCount, Offset);
break;
case UPDATE:
case UPDATE_FILE:
Print (L"sf: Update %d bytes at offset 0x%x\n", ByteCount, Offset);
break;
case READ:
Print (L"sf: Read %d bytes from offset 0x%x\n", ByteCount, Offset);
break;
case READ_FILE:
Status = FileHandleWrite (FileHandle, &ByteCount, FileBuffer);
if (EFI_ERROR(Status)) {
Print (L"sf: Error while writing into file\n");
goto Error_Free_Buffer;
}
break;
}
if (FileFlag) {
FreePool (FileBuffer);
if (FileHandle != NULL) {
ShellCloseFile (&FileHandle);
}
}
return EFI_SUCCESS;
Error_Free_Buffer:
FreePool (FileBuffer);
Error_Close_File:
ShellCloseFile (&FileHandle);
return SHELL_ABORTED;
}
EFI_STATUS
EFIAPI
ShellSpiFlashLibConstructor (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
gShellSfHiiHandle = NULL;
gShellSfHiiHandle = HiiAddPackages (
&gShellSfHiiGuid, gImageHandle,
UefiShellSpiFlashLibStrings, NULL
);
if (gShellSfHiiHandle == NULL) {
return EFI_DEVICE_ERROR;
}
ShellCommandRegisterCommandName (
L"sf", ShellCommandRunSpiFlash, ShellCommandGetManFileNameSpiFlash, 0,
L"sf", TRUE , gShellSfHiiHandle, STRING_TOKEN (STR_GET_HELP_SF)
);
return EFI_SUCCESS;
}
EFI_STATUS
EFIAPI
ShellSpiFlashLibDestructor (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
if (gShellSfHiiHandle != NULL) {
HiiRemovePackages (gShellSfHiiHandle);
}
return EFI_SUCCESS;
}