#ifndef __UAPI_CAM_DEFS_H__ #define __UAPI_CAM_DEFS_H__ #include <linux/videodev2.h> #include <linux/types.h> #include <linux/ioctl.h> /* camera op codes */ #define CAM_COMMON_OPCODE_BASE 0x100 #define CAM_QUERY_CAP (CAM_COMMON_OPCODE_BASE + 0x1) #define CAM_ACQUIRE_DEV (CAM_COMMON_OPCODE_BASE + 0x2) #define CAM_START_DEV (CAM_COMMON_OPCODE_BASE + 0x3) #define CAM_STOP_DEV (CAM_COMMON_OPCODE_BASE + 0x4) #define CAM_CONFIG_DEV (CAM_COMMON_OPCODE_BASE + 0x5) #define CAM_RELEASE_DEV (CAM_COMMON_OPCODE_BASE + 0x6) #define CAM_SD_SHUTDOWN (CAM_COMMON_OPCODE_BASE + 0x7) #define CAM_FLUSH_REQ (CAM_COMMON_OPCODE_BASE + 0x8) #define CAM_COMMON_OPCODE_MAX (CAM_COMMON_OPCODE_BASE + 0x9) #define CAM_EXT_OPCODE_BASE 0x200 #define CAM_CONFIG_DEV_EXTERNAL (CAM_EXT_OPCODE_BASE + 0x1) /* camera handle type */ #define CAM_HANDLE_USER_POINTER 1 #define CAM_HANDLE_MEM_HANDLE 2 /* Generic Blob CmdBuffer header properties */ #define CAM_GENERIC_BLOB_CMDBUFFER_SIZE_MASK 0xFFFFFF00 #define CAM_GENERIC_BLOB_CMDBUFFER_SIZE_SHIFT 8 #define CAM_GENERIC_BLOB_CMDBUFFER_TYPE_MASK 0xFF #define CAM_GENERIC_BLOB_CMDBUFFER_TYPE_SHIFT 0 /* Command Buffer Types */ #define CAM_CMD_BUF_DMI 0x1 #define CAM_CMD_BUF_DMI16 0x2 #define CAM_CMD_BUF_DMI32 0x3 #define CAM_CMD_BUF_DMI64 0x4 #define CAM_CMD_BUF_DIRECT 0x5 #define CAM_CMD_BUF_INDIRECT 0x6 #define CAM_CMD_BUF_I2C 0x7 #define CAM_CMD_BUF_FW 0x8 #define CAM_CMD_BUF_GENERIC 0x9 #define CAM_CMD_BUF_LEGACY 0xA /** * enum flush_type_t - Identifies the various flush types * * @CAM_FLUSH_TYPE_REQ: Flush specific request * @CAM_FLUSH_TYPE_ALL: Flush all requests belonging to a context * @CAM_FLUSH_TYPE_MAX: Max enum to validate flush type * */ enum flush_type_t { CAM_FLUSH_TYPE_REQ, CAM_FLUSH_TYPE_ALL, CAM_FLUSH_TYPE_MAX }; /** * struct cam_control - Structure used by ioctl control for camera * * @op_code: This is the op code for camera control * @size: Control command size * @handle_type: User pointer or shared memory handle * @reserved: Reserved field for 64 bit alignment * @handle: Control command payload */ struct cam_control { uint32_t op_code; uint32_t size; uint32_t handle_type; uint32_t reserved; uint64_t handle; }; /* camera IOCTL */ #define VIDIOC_CAM_CONTROL \ _IOWR('V', BASE_VIDIOC_PRIVATE, struct cam_control) /** * struct cam_hw_version - Structure for HW version of camera devices * * @major : Hardware version major * @minor : Hardware version minor * @incr : Hardware version increment * @reserved : Reserved for 64 bit aligngment */ struct cam_hw_version { uint32_t major; uint32_t minor; uint32_t incr; uint32_t reserved; }; /** * struct cam_iommu_handle - Structure for IOMMU handles of camera hw devices * * @non_secure: Device Non Secure IOMMU handle * @secure: Device Secure IOMMU handle * */ struct cam_iommu_handle { int32_t non_secure; int32_t secure; }; /* camera secure mode */ #define CAM_SECURE_MODE_NON_SECURE 0 #define CAM_SECURE_MODE_SECURE 1 /* Camera Format Type */ #define CAM_FORMAT_BASE 0 #define CAM_FORMAT_MIPI_RAW_6 1 #define CAM_FORMAT_MIPI_RAW_8 2 #define CAM_FORMAT_MIPI_RAW_10 3 #define CAM_FORMAT_MIPI_RAW_12 4 #define CAM_FORMAT_MIPI_RAW_14 5 #define CAM_FORMAT_MIPI_RAW_16 6 #define CAM_FORMAT_MIPI_RAW_20 7 #define CAM_FORMAT_QTI_RAW_8 8 #define CAM_FORMAT_QTI_RAW_10 9 #define CAM_FORMAT_QTI_RAW_12 10 #define CAM_FORMAT_QTI_RAW_14 11 #define CAM_FORMAT_PLAIN8 12 #define CAM_FORMAT_PLAIN16_8 13 #define CAM_FORMAT_PLAIN16_10 14 #define CAM_FORMAT_PLAIN16_12 15 #define CAM_FORMAT_PLAIN16_14 16 #define CAM_FORMAT_PLAIN16_16 17 #define CAM_FORMAT_PLAIN32_20 18 #define CAM_FORMAT_PLAIN64 19 #define CAM_FORMAT_PLAIN128 20 #define CAM_FORMAT_ARGB 21 #define CAM_FORMAT_ARGB_10 22 #define CAM_FORMAT_ARGB_12 23 #define CAM_FORMAT_ARGB_14 24 #define CAM_FORMAT_DPCM_10_6_10 25 #define CAM_FORMAT_DPCM_10_8_10 26 #define CAM_FORMAT_DPCM_12_6_12 27 #define CAM_FORMAT_DPCM_12_8_12 28 #define CAM_FORMAT_DPCM_14_8_14 29 #define CAM_FORMAT_DPCM_14_10_14 30 #define CAM_FORMAT_NV21 31 #define CAM_FORMAT_NV12 32 #define CAM_FORMAT_TP10 33 #define CAM_FORMAT_YUV422 34 #define CAM_FORMAT_PD8 35 #define CAM_FORMAT_PD10 36 #define CAM_FORMAT_UBWC_NV12 37 #define CAM_FORMAT_UBWC_NV12_4R 38 #define CAM_FORMAT_UBWC_TP10 39 #define CAM_FORMAT_UBWC_P010 40 #define CAM_FORMAT_PLAIN8_SWAP 41 #define CAM_FORMAT_PLAIN8_10 42 #define CAM_FORMAT_PLAIN8_10_SWAP 43 #define CAM_FORMAT_YV12 44 #define CAM_FORMAT_Y_ONLY 45 #define CAM_FORMAT_MAX 46 /* camera rotaion */ #define CAM_ROTATE_CW_0_DEGREE 0 #define CAM_ROTATE_CW_90_DEGREE 1 #define CAM_RORATE_CW_180_DEGREE 2 #define CAM_ROTATE_CW_270_DEGREE 3 /* camera Color Space */ #define CAM_COLOR_SPACE_BASE 0 #define CAM_COLOR_SPACE_BT601_FULL 1 #define CAM_COLOR_SPACE_BT601625 2 #define CAM_COLOR_SPACE_BT601525 3 #define CAM_COLOR_SPACE_BT709 4 #define CAM_COLOR_SPACE_DEPTH 5 #define CAM_COLOR_SPACE_MAX 6 /* camera buffer direction */ #define CAM_BUF_INPUT 1 #define CAM_BUF_OUTPUT 2 #define CAM_BUF_IN_OUT 3 /* camera packet device Type */ #define CAM_PACKET_DEV_BASE 0 #define CAM_PACKET_DEV_IMG_SENSOR 1 #define CAM_PACKET_DEV_ACTUATOR 2 #define CAM_PACKET_DEV_COMPANION 3 #define CAM_PACKET_DEV_EEPOM 4 #define CAM_PACKET_DEV_CSIPHY 5 #define CAM_PACKET_DEV_OIS 6 #define CAM_PACKET_DEV_FLASH 7 #define CAM_PACKET_DEV_FD 8 #define CAM_PACKET_DEV_JPEG_ENC 9 #define CAM_PACKET_DEV_JPEG_DEC 10 #define CAM_PACKET_DEV_VFE 11 #define CAM_PACKET_DEV_CPP 12 #define CAM_PACKET_DEV_CSID 13 #define CAM_PACKET_DEV_ISPIF 14 #define CAM_PACKET_DEV_IFE 15 #define CAM_PACKET_DEV_ICP 16 #define CAM_PACKET_DEV_LRME 17 #define CAM_PACKET_DEV_MAX 18 /* constants */ #define CAM_PACKET_MAX_PLANES 3 /** * struct cam_plane_cfg - Plane configuration info * * @width: Plane width in pixels * @height: Plane height in lines * @plane_stride: Plane stride in pixel * @slice_height: Slice height in line (not used by ISP) * @meta_stride: UBWC metadata stride * @meta_size: UBWC metadata plane size * @meta_offset: UBWC metadata offset * @packer_config: UBWC packer config * @mode_config: UBWC mode config * @tile_config: UBWC tile config * @h_init: UBWC horizontal initial coordinate in pixels * @v_init: UBWC vertical initial coordinate in lines * */ struct cam_plane_cfg { uint32_t width; uint32_t height; uint32_t plane_stride; uint32_t slice_height; uint32_t meta_stride; uint32_t meta_size; uint32_t meta_offset; uint32_t packer_config; uint32_t mode_config; uint32_t tile_config; uint32_t h_init; uint32_t v_init; }; /** * struct cam_cmd_buf_desc - Command buffer descriptor * * @mem_handle: Command buffer handle * @offset: Command start offset * @size: Size of the command buffer in bytes * @length: Used memory in command buffer in bytes * @type: Type of the command buffer * @meta_data: Data type for private command buffer * Between UMD and KMD * */ struct cam_cmd_buf_desc { int32_t mem_handle; uint32_t offset; uint32_t size; uint32_t length; uint32_t type; uint32_t meta_data; }; /** * struct cam_buf_io_cfg - Buffer io configuration for buffers * * @mem_handle: Mem_handle array for the buffers. * @offsets: Offsets for each planes in the buffer * @planes: Per plane information * @width: Main plane width in pixel * @height: Main plane height in lines * @format: Format of the buffer * @color_space: Color space for the buffer * @color_pattern: Color pattern in the buffer * @bpp: Bit per pixel * @rotation: Rotation information for the buffer * @resource_type: Resource type associated with the buffer * @fence: Fence handle * @early_fence: Fence handle for early signal * @aux_cmd_buf: An auxiliary command buffer that may be * used for programming the IO * @direction: Direction of the config * @batch_size: Batch size in HFR mode * @subsample_pattern: Subsample pattern. Used in HFR mode. It * should be consistent with batchSize and * CAMIF programming. * @subsample_period: Subsample period. Used in HFR mode. It * should be consistent with batchSize and * CAMIF programming. * @framedrop_pattern: Framedrop pattern * @framedrop_period: Framedrop period * @flag: Flags for extra information * @direction: Buffer direction: input or output * @padding: Padding for the structure * */ struct cam_buf_io_cfg { int32_t mem_handle[CAM_PACKET_MAX_PLANES]; uint32_t offsets[CAM_PACKET_MAX_PLANES]; struct cam_plane_cfg planes[CAM_PACKET_MAX_PLANES]; uint32_t format; uint32_t color_space; uint32_t color_pattern; uint32_t bpp; uint32_t rotation; uint32_t resource_type; int32_t fence; int32_t early_fence; struct cam_cmd_buf_desc aux_cmd_buf; uint32_t direction; uint32_t batch_size; uint32_t subsample_pattern; uint32_t subsample_period; uint32_t framedrop_pattern; uint32_t framedrop_period; uint32_t flag; uint32_t padding; }; /** * struct cam_packet_header - Camera packet header * * @op_code: Camera packet opcode * @size: Size of the camera packet in bytes * @request_id: Request id for this camera packet * @flags: Flags for the camera packet * @padding: Padding * */ struct cam_packet_header { uint32_t op_code; uint32_t size; uint64_t request_id; uint32_t flags; uint32_t padding; }; /** * struct cam_patch_desc - Patch structure * * @dst_buf_hdl: Memory handle for the dest buffer * @dst_offset: Offset byte in the dest buffer * @src_buf_hdl: Memory handle for the source buffer * @src_offset: Offset byte in the source buffer * */ struct cam_patch_desc { int32_t dst_buf_hdl; uint32_t dst_offset; int32_t src_buf_hdl; uint32_t src_offset; }; /** * struct cam_packet - Camera packet structure * * @header: Camera packet header * @cmd_buf_offset: Command buffer start offset * @num_cmd_buf: Number of the command buffer in the packet * @io_config_offset: Buffer io configuration start offset * @num_io_configs: Number of the buffer io configurations * @patch_offset: Patch offset for the patch structure * @num_patches: Number of the patch structure * @kmd_cmd_buf_index: Command buffer index which contains extra * space for the KMD buffer * @kmd_cmd_buf_offset: Offset from the beginning of the command * buffer for KMD usage. * @payload: Camera packet payload * */ struct cam_packet { struct cam_packet_header header; uint32_t cmd_buf_offset; uint32_t num_cmd_buf; uint32_t io_configs_offset; uint32_t num_io_configs; uint32_t patch_offset; uint32_t num_patches; uint32_t kmd_cmd_buf_index; uint32_t kmd_cmd_buf_offset; uint64_t payload[1]; }; /** * struct cam_release_dev_cmd - Control payload for release devices * * @session_handle: Session handle for the release * @dev_handle: Device handle for the release */ struct cam_release_dev_cmd { int32_t session_handle; int32_t dev_handle; }; /** * struct cam_start_stop_dev_cmd - Control payload for start/stop device * * @session_handle: Session handle for the start/stop command * @dev_handle: Device handle for the start/stop command * */ struct cam_start_stop_dev_cmd { int32_t session_handle; int32_t dev_handle; }; /** * struct cam_config_dev_cmd - Command payload for configure device * * @session_handle: Session handle for the command * @dev_handle: Device handle for the command * @offset: Offset byte in the packet handle. * @packet_handle: Packet memory handle for the actual packet: * struct cam_packet. * */ struct cam_config_dev_cmd { int32_t session_handle; int32_t dev_handle; uint64_t offset; uint64_t packet_handle; }; /** * struct cam_query_cap_cmd - Payload for query device capability * * @size: Handle size * @handle_type: User pointer or shared memory handle * @caps_handle: Device specific query command payload * */ struct cam_query_cap_cmd { uint32_t size; uint32_t handle_type; uint64_t caps_handle; }; /** * struct cam_acquire_dev_cmd - Control payload for acquire devices * * @session_handle: Session handle for the acquire command * @dev_handle: Device handle to be returned * @handle_type: Resource handle type: * 1 = user pointer, 2 = mem handle * @num_resources: Number of the resources to be acquired * @resources_hdl: Resource handle that refers to the actual * resource array. Each item in this * array is device specific resource structure * */ struct cam_acquire_dev_cmd { int32_t session_handle; int32_t dev_handle; uint32_t handle_type; uint32_t num_resources; uint64_t resource_hdl; }; /** * struct cam_flush_dev_cmd - Control payload for flush devices * * @version: Version * @session_handle: Session handle for the acquire command * @dev_handle: Device handle to be returned * @flush_type: Flush type: * 0 = flush specific request * 1 = flush all * @reserved: Reserved for 64 bit aligngment * @req_id: Request id that needs to cancel * */ struct cam_flush_dev_cmd { uint64_t version; int32_t session_handle; int32_t dev_handle; uint32_t flush_type; uint32_t reserved; int64_t req_id; }; #endif /* __UAPI_CAM_DEFS_H__ */