普通文本  |  67行  |  2.49 KB

[General]

# List of plugins that should not be loaded on bluetoothd startup
#DisablePlugins = network,input

# Default adaper name
# %h - substituted for hostname
# %d - substituted for adapter id
# %b - substituted for ro.product.brand
# %m - substituted for ro.product.model
# %n - substituted for ro.product.name
Name = %m

# Default device class. Only the major and minor device class bits are
# considered.
# Local device class
#     0x400000  - Service class: Telephony
#     0x000200  - Major class: Phone
#     0x00000C  - Minor class: Smart phone
Class = 0x40020C

# How long to stay in discoverable mode before going back to non-discoverable
# The value is in seconds. Default is 180, i.e. 3 minutes.
# 0 = disable timer, i.e. stay discoverable forever
DiscoverableTimeout = 120

# How long to stay in pairable mode before going back to non-discoverable
# The value is in seconds. Default is 0.
# 0 = disable timer, i.e. stay pairable forever
PairableTimeout = 0

# Use some other page timeout than the controller default one
# which is 16384 (10 seconds).
PageTimeout = 8192

# Discover scheduler interval used in Adapter.DiscoverDevices
# The value is in seconds. Defaults is 0 to use controller scheduler.
DiscoverSchedulerInterval = 0

# What value should be assumed for the adapter Powered property when
# SetProperty(Powered, ...) hasn't been called yet. Defaults to true
InitiallyPowered = true

# Remember the previously stored Powered state when initializing adapters
RememberPowered = true

# Use vendor, product and version information for DID profile support.
# The values are separated by ":" and VID, PID and version.
DeviceID = android:generic:1.5

# Do reverse service discovery for previously unknown devices that connect to
# us. This option is really only needed for qualification since the BITE tester
# doesn't like us doing reverse SDP for some test cases (though there could in
# theory be other useful purposes for this too). Defaults to true.
ReverseServiceDiscovery = true

# Enable name resolving after inquiry. Set it to 'false' if you don't need
# remote devices name and want shorter discovery cycle. Defaults to 'true'.
NameResolving = true

# The link policy for connections. By default it's set to 15(0x000f) which is
# a bitwise OR of role switch(0x0001), hold mode(0x0002), sniff mode(0x0004)
# and park state(0x0008) are all enabled. However, some devices have
# connection stability issue or fail to setup SCO when the link is in park
# state, which requires park state bit cleared.
DefaultLinkPolicy = 7